Acura MDX 2005 Owner's Manual

Toerasethecodesstoredinallthree
buttons, press and hold the two
outside buttons until the red light
begins to f lash, then release the
buttons.
Youshoulderaseallthreecodes
bef ore selling the vehicle.
Totrainanalreadyprogrammed
HomeLink button with a new device,
you do not have to erase all the
memory. Train the selected button
over the existing memory code
f ollowing the steps under ‘‘Training
HomeLink’’.If you have problems with training
the HomeLink Universal Transceiver,
or would like inf ormation on home
products that can be operated by
HomeLink, call (800) 355-3515. On
the Internet, go to
www.homelink.com.
HomeLink
is a registered
trademark of Johnson Controls, Inc.
As required by the FCC:
This device complies with Part 15 of theFCC rules. Operation is subject to thef ollowing two conditions: (1) This devicemay not cause harmf ul interf erence, and(2) this device must accept anyinterf erence received, includinginterf erence that may cause undesiredoperation.
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
This device complies with IndustryCanada Standard RSS-210.Operation is subject to the f ollowing twoconditions: (1) this device may not causeinterf erence, and (2) this device mustaccept any interf erence that may causeundesired operation of the device.Erasing Codes Customer Assistance
Retraining a Button
HomeL ink Universal T ransceiver
Features
159

Your vehicle is equipped with the
HandsFreeLink (HFL). HFL uses
Bluetooth technology as a wireless
link between it and your Bluetooth
compatible cell phone. When you are
in your vehicle and your phone is
linked to the HFL, you’ll enjoy saf e,
hands-f ree phone use. The HFL is
available only in English.When the HFL is in use, the sound
comes through the vehicle’s f ront
audio system speakers. If the audio
system is in use while making a call,
the HFL over-rides the audio system.
To change the volume level, use the
audio system volume knob. The HFL can store up to 50 names
and phone numbers in its phonebook.
Withalinkedphone,youcanthen
automatically dial any name or
number in the phonebook.
Here are the main f eatures of the
HFL. Instructions f or using the HFL
begin on page .
HFL recognizes simple voice
commands, such as phone numbers
and names. It uses these commands
to automatically dial, receive, and
store numbers. For more
inf ormation on voice control, see
UsingVoiceControlonpage . Bluetooth
is a registered trademark
of Bluetooh SIG, Inc.
Bluetooth is the wireless technology
that links your phone to the HFL.
TheHFLusesaClass3Bluetooth,
which means the maximum range
between your phone and vehicle is
30 f eet (10 meters).
To use the HFL, your phone must
have Bluetooth capability along with
the Hands Free Prof ile. This type of
phone is available through many
phone makers and cellular carriers.
You can also f ind a phone by visiting In Canada, visit
With a linked phone, the HFL allows
you to send and receive calls in your
vehicle without holding the phone. Here are the main components of
the HFL system:
The HFL microphone is on the
ceiling, between the f ront map lights
and the console buttons. On models
with navigation system, the
microphone is shared with the
navigation system.
162
162
www.acura.com.www.acura.ca.
BluetoothWireless Technology
Audio System Phonebook
Voice Control Incoming/Outgoing CallsMicrophone
HandsFreeL ink
160
TM

µ
ÎÎ
Here is the function of each HFL
button:
HFLTalk:Thisbuttonisusedbefore
you give a command, to answer
incoming calls, and to conf irm
system inf ormation.
HFLBack:Thisbuttonisusedto
end a call, go back to the previous
voice control command, and to
cancel an operation.
To operate the HFL, use the HFL
TALK/BACKbuttonontheleftside
of the steering wheel. Phone Indicates a phone is
currently linked to the HFL.
This inf ormation is displayed
whetherornotthephoneisbeing
used:Touring model with Navigation System
CONT INUED
HFL Buttons
HandsFreeL ink
Features
161
Refer to your navigation system
Manual. SIGNAL
STLENGTH
ROAM STATUS
NAVIGATION SYSTEM BUTTON HFL TALK/BCK BUTTON
PHONE
TM

Î
Î
µ
µ
Î
To skip a voice prompt, press the
Talk button while the HFL is
speaking. The HFL will then begin
listening f or your next command. To enter a string of numbers in a
Call or Dial command, you can say
them all at once, or you can
separate them in blocks of 3, 4, 7,
10, and 11. Many commands can be spoken
together. For example, you can
say, ‘‘Dial 123-456-7891.’’
All phones may not
operate identically, and some may
cause inconsistent operation of the
HFL.
Here are some guidelines f or using
voice control:
Signal Strength (models without
navigation system) Indicates
the network signal strength of the
current phone call. Five bars
equals f ull signal strength.
ROAM Status (models without
navigation system) Indicates
your phone is roaming.
Some phones will not send this
inf ormation to the HFL. TheHFLisoperatedbytheHFL
TALK/BACKbuttonontheleftside
of the steering wheel. The next f ew
pages provide easy-to-use
instructions f or all basic f eatures of
the HFL.
To enter a command, press the top
of the TALK/BACK button. Then,
af ter the beep, say your command
in a clear, natural tone.
If the HFL does not recognize a
command, its response is, ‘‘Pardon.’’
If it doesn’t recognize the command a second time, its
response is, ‘‘Please repeat.’’ If it
doesn’t recognize the command a
third time, it plays the Help
prompt.
To hear a list of available options
at any time, press the top of the
TALK/BACK button, wait f or the
beep, and say, ‘‘Hands f ree link
help.’’
For best system operation, set the
climate control f an speed to low,
and direct the center vents away
f rom the microphone in the ceiling.
:
How to Use the HFL
Using Voice Control
HandsFreeL ink
162
NOTE:
TM

To go back one step in a command
process, say, ‘‘Go back,’’ or press
the Back button.
If nothing is said while the HFL is
listening f or a command, the HFL
will time out and stop its voice
recognition. The next time you
press the top of the TALK/BACK
button, the HFL begins listening
f rom the point at which it timed
out.
When you f inish a command
sequence, the HFL goes back to
its main menu. For example, when
you store the name, ‘‘Eric,’’ the
HFL response is, ‘‘Eric has been
stored.’’ The next time you pressthe Talk button, you will be at the
main menu.
To end a command sequence at
any time, press and hold the Back
button, or press the Talk button,
wait f or the beep, and say, ‘‘Cancel.’’
ThenexttimeyoupresstheTalk
button, the HFL begins f rom its
main menu. The HFL will accept a numeric, f our-
digit passcode that you can use f or
security purposes.
With the ignition in the ON (II)
position, press and release the top
of the TALK/BACK button on the
steering wheel. Af ter the beep, say
‘‘Security.’’ The HFL response is
‘‘Security options are lock, unlock,
and set passcode.’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Set passcode.’’
The HFL response is ‘‘What is the
new f our-digit passcode?’’ (If you
are changing the passcode, you
will f irst be asked f or the current
passcode.)
Press and release the top of the
TALK/BACK button. After the beep, say the f our-digit passcode
you want to use. For example, say
‘‘1,2,3,4.’’TheHFLresponseis
‘‘1,2,3,4.Isthiscorrect?’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Yes.’’ The HFL
response is ‘‘The new passcode
has been stored. Returning to the
main menu.’’
Once a passcode is set, you can lock
the HFL so it only operates after the
passcode is entered, or you can
unlock it so anyone using your
vehicle can also use the HFL. Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Security.’’ The HFL
response is ‘‘Security options are
lock, unlock, and set passcode.’’
2. 1.
4. 5.
3. 1.
To set your passcode, do this:
To lock or unlock the HFL, do this:
CONT INUED
HandsFreeL ink
Setting Your PasscodeL ocking or Unlocking the HFL
Features
163
TM

Thevoiceof theHFLcanbesetto
male or f emale (U.S. models only).
Also, the incoming notif ication can
be set to a ring tone, a prompt, or no
notification.
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Lock’’ or ‘‘Unlock.’’
Lock means the HFL will prompt
you f or your passcode each time
the ignition switch is turned to ON
(II) and you press the Talk button.
You will only be asked f or the
passcode once per ignition cycle. If
the HFL is locked, its response is
‘‘System is locked. Each time the
vehicle is turned on, the passcode
will be required to use the system.’’
If the HFL is unlocked, its
response is ‘‘The system is
unlocked. Returning to the main
menu.’’ Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘System.’’ The HFL
response is, ‘‘System options are
setup and clear.’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Setup.’’ The HFL
response is ‘‘Would you like male
or f emale prompts?’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Male’’ or ‘‘Female,’’
depending on the system voice
you want. The HFL response is,
‘‘Male (Female) prompts have
been selected. Would you like an
audible notif ication of an incomingcall?’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Ring tone’’ or ‘‘Prompt.’’
If you choose ‘‘Ring tone’’ you will
hear a ring tone through the audio
speakers to announce an incoming
call. If you choose ‘‘Prompt,’’ you
will hear this message to
announce an incoming call: ‘‘You
have an incoming call.’’ Press and release the top of the
TALK/BACK button. If you say
‘‘Yes’’ af ter the beep, the HFL
response is, ‘‘Would you like a ring
tone or a prompt?’’ If you say ‘‘No’’
af ter the beep, the HFL returns to
its main menu. Saying ‘‘No’’ will
result in no ring tone or prompt
playback during an incoming call.
The audio system will still mute,
and a message will be displayed.
2. 1. 4.
5.
3.
2.
To set up the system, do this:
Setting Up the System
HandsFreeL ink
164
TM

With your phone on and the
ignition in the ACCESSORY (I) or
ON (II) position, press and release
the Talk button. After the beep,
say ‘‘Phone set up.’’ The HFL
response is ‘‘Phone set up options
are status, pair, edit, delete, and
list.’’
Your Bluetooth compatible phone
with HandsFree Prof ile must be
paired to the HFL before you can
make and receive hands-free call.
HFL does not allow you to pair
your phone if the vehicle is
moving.
For pairing, your phone must be in
its Discovery mode.
The f ollowing procedure works f or
most phones. If you cannot pair
your phone to the HFL with this
procedure, ref er to your phone’s
operating manual, or talk to your
phone retailer.
During the pairing process, turn
of f any previously paired phones
bef ore pairing a new phone. Up to six phones can be paired to
the HFL. Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Pair.’’ The HFL
response is ‘‘The pairing process
requires operation of your mobile
phone. For saf ety, only perf orm
this f unction while the vehicle is
stopped. State a f our-digit code f or
pairing. Note this code. It will be
requested by the phone.’’
Press and release the top of the
TALK/BACK button. After the
beep, say the f our-digit code you
want to use. For example, say ‘‘1, 2,
3, 4.’’ The HFL response is, ‘‘1, 2, 3,
4. Is this correct?’’Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Enter.’’ The HFL
response is ‘‘Searching f or a
Bluetooth phone.’’
When asked by the phone, enter
the four-digit code from step 3 into
your phone. The HFL response is
‘‘A new phone has been f ound.
What would you like to name this
phone?’’ Follow the prompts on your phone
to get it into its Search mode. The
phone will search f or the HFL.
When it comes up, select
HandsFreeLink f rom the list of
options displayed on your phone.
Steps 5 and 6 show a
common way to get your phone into
its Discovery mode. If these steps do
not work on your phone, ref er to the
phone’s operating manual.
1.
4.
5.
6.
2.
3.
CONT INUED
Pairing Your Phone
HandsFreeL ink
Features
165
NOTE:
NOTE:
TM

To delete a paired phone, do this:
To rename a paired phone, do this:Press and release the top of the
TALK/BACK button. After the
beep, say the name you want to
use. For example, say ‘‘Eric’s
phone.’’ The HFL response is
‘‘Eric’s phone has been
successf ully paired. Returning to
the main menu.’’ Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Phone setup.’’ The HFL
response is ‘‘Phone setup options
are status, pair, edit, delete, and
list.’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Edit.’’ The HFL
response is ‘‘Which phone would
you like to edit?’’
Press and release the top of the
TALK/BACK button. After the
beep, say the name of the phone
you want to rename. For example,
say ‘‘Eric’s phone.’’ The HFL
response is ‘‘What is the new
name f or Eric’s phone?’’
Press and release the top of the
TALK/BACK button. After the
beep, say the new name of the
phone. For example, say ‘‘Lisa’s
phone.’’ The HFL response is,
‘‘The name has been changed.
Returning to the main menu.’’Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Phone setup.’’ The HFL
response is, ‘‘Phone setup options
are status, pair, edit, delete, and
list.’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Delete.’’ The HFL
response is, ‘‘Which phone would
you like to delete?’’
Press and release the top of the
TALK/BACK button. After the
beep, say the name of the phone
you want to delete. For example
say ‘‘Eric’s phone.’’ The HFL
response is ‘‘Would you like to
delete Eric’s phone?’’
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Yes.’’ The HFL
response is ‘‘Preparing to delete
Eric’s phone.’’ Say ‘‘OK’’ to
continue. Otherwise, say ‘‘Go back,’’
or ‘‘Cancel.’’
If you want to pair another phone,
repeat steps 1 through 7.
2.
3.
4.
1.
1.
2. 3.
4.
7.
8.
HandsFreeL ink
166
TM

To f ind out the status of the phone beingused, do this: To change f rom the currently linked
phone to another paired phone, do this:
To list all paired phones, do this:Press and release the top of the
TALK/BACK button. If you say
‘‘OK’’ af ter the beep, the HFL
response is ‘‘The phone has been
deleted. Returning to the main
menu.’’ If you say ‘‘Go back,’’ or
‘‘Cancel,’’ the phone will not be
deleted. Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Phone setup.’’ The HFL
response is ‘‘Phone setup options
are status, pair, edit, delete, and
list.’’Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Next phone.’’ The HFL
response is ‘‘Searching f or the
next phone.’’ The HFL then
disconnects the linked phone and
searches f or another paired phone.
If no other phones are f ound, the
f irst phone remains linked.
Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘List.’’ The HFL
responds by listing the name of
each paired phone. When all
phones paired to the system have
been read, the HFL response is
‘‘The entire list has been read.
Returning to the main menu.’’ Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Phone setup.’’ The HFL
response is ‘‘Phone setup options
are status, pair, edit, delete, and
list.’’ Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Status.’’ An example of
the HFL response is, ‘‘Eric’s phone
is linked. Battery strength is three
bars. Signal strength is f ive bars,
and the phone is roaming.
Returning to the main menu.’’
2.
1. 1.
2. 1.
5.
HandsFreeL ink
Features
167
TM

You can make calls using any phone
number, or by using a name in the
HFL phonebook. You can also redial
the last number called. During a call,
theHFLallowsyoutotalkupto30
minutes af ter you remove the key
from the ignition switch.With your phone on and the
ignition in the ACCESSORY (I) or
ON (II) position, press and release
the top of the TALK/BACK
button. After the beep, say ‘‘Call’’
or ‘‘Dial.’’ The HFL response is,
‘‘What name or number would you
like to call/dial?’’ Press and release the top of the
TALK/BACK button. After the
beep, say ‘‘Call’’ or ‘‘Dial.’’ The
HFL response is ‘‘Calling’’ or
‘‘Dialing.’’ Once connected, you
will hear the person you called
through the audio speakers. To
change the volume, use the audio
system volume knob.
To end the call, press the bottom
of the TALK/BACK button.
With your phone on and the
ignition in the ACCESSORY (I) or
ON (II) position, press and release
the top of the TALK/BACK
button. After the beep, say ‘‘Call’’
or ‘‘Dial.’’ The HFL response is
‘‘What name or number would you
like to call/dial?’’
Press and release the top of the
TALK/BACK button. After the
beep, say the number you want to
call. For example, say ‘‘123 456
7891.’’ The HFL response is ‘‘123
456 7891. Say call, dial, or continue
to add numbers.’’ Press and release the top of the
TALK/BACK button. After the
beep, say the name you want to
call. For example, say ‘‘Eric.’’ TheHFL response is ‘‘Would you like
to call Eric?’’
Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’ The top
of the TALK/BACK response is
‘‘Calling’’ or ‘‘Dialing.’’ Once
connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob.
To end the call, press the bottom
of the TALK/BACK button.
To redial the last number called by
the phone, press and release the top
of the TALK/BACK button. After
the beep, say ‘‘Redial.’’ The HFL
response is, ‘‘Redialing.’’ Once
connected, you will hear the person
you called through the audio
speakers. To change the volume, use
the audio system volume knob.
1. 3.
3.
1.
2. 2. 4.4.
To make a call using a phone number,do this:
To make a call using a name in the HFLphonebook, do this:
Making a Call
HandsFreeL ink
168
TM