seats Acura MDX 2008 Owner's Guide

When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle.To activate the lockable retractor,
slowly pull the shoulder part of the
belt all the way out until it stops,
then let the belt f eed back into the
retractor.
Af ter the belt has retracted, tug on
it. If the belt is locked, you will not
be able to pull it out. If you can pull
thebeltout,itisnotlocked,and
you will need to repeat these steps.
In addition, the lap/shoulder belts in
all seating positions except the
driver’s have a lockable retractor
that must be activated to secure a
child seat.
If you intend to install a child seat in
the center seating position of second
row seat, make sure the detachable
seat belt is securely latched (see
page).
1. 2.
3.
146
Installing a Child Seat with a L ap/
Shoulder Belt
Installing a Child Seat
50
\f—\f—\fy\f\fy
()-
\fy\f\fy
2008 MDX

CONT INUED
Does the shoulder belt cross
between the child’s neck and arm?
Is the lap part of the belt as low as
possible, touching the child’s
thighs?
Will the child be able to stay
seated like this f or the whole trip?
If you answer yes to all these
questions, the child is ready to wear
the lap/shoulder belt correctly. If
you answer no to any question, the
child needs to ride on a booster seat. A child who has outgrown a f orward- f acing child seat should ride in a
back seat and use a booster seat
until the lap/shoulder belt f its them
properly without the booster.Some states and Canadian provinces
also require children to use a booster
seat until they reach a given age or
weight (e.g., 6 years or 60 lbs). Be
sure to check current laws in the
states or provinces where you intend
to drive.
Booster seats can be high-back or
low-back. Whichever style you select,
make sure the booster seat meets
f ederal saf ety standards (see page
) and that you f ollow the booster
seat maker’s instructions.
3.
4.
5.
45
Protecting L arger Children
Using a Booster Seat
Driver and Passenger Saf ety
55
\f—\f—\fy\f\fy
()-
\fy\f\f\fy
2008 MDX

This section gives inf ormation about
the controls and displays that
contribute to the daily operation of
your vehicle. All the essential
controls are within easy reach............................
Control Locations .62
............................
Instrument Panel .63
..........
Instrument Panel Indicators .64
.............................................
Gauges .72
.............
Multi-Inf ormation Display .73
Controls Near the Steering
.........................................
Wheel .115
Windshield Wipers and
.................................
Washers .116
Rear Window Wiper and ...................................
Washer .117
.........
Turn Signal and Headlights .118
...............
Hazard Warning Button .122
...............
Rear Window Def ogger .122
......
Instrument Panel Brightness .123
......
Steering Wheel Adjustments .124
.............................
Keys and Locks .126
......................
Immobilizer System .128
..............................
Ignition Switch .129
....................................
Door Locks .130
............
Childproof Door Locks .131
..........................................
Tailgate .131
..........................
Power Tailgate .132
.....................
Remote Transmitter .135
...............................................
Seats .140
...................
Detachable Anchor .146 ..................................
Seat Heaters .148
............................
Power Windows .149
.......................................
Moonroof .152
...............................
Parking Brake .153
...........................................
Mirrors .154
Driving Position Memory
........................................
System .157
...............................
Interior Lights .159
.........
Interior Convenience Items .162
.....................
Beverage Holders .163
.............
Console Compartment .164
..............
Storage Compartment .164
..................................
Glove Box .164
....................
Sunglasses Holder .165
.............................
Cargo Hooks .165
...................................
Sun Visor .166
............................
Vanity Mirror .166
........
Accessory Power Sockets .166
.......................
AC Power Outlet .167
Instruments and Controls
Inst rument s and Cont rols
61
\f—\f—\fy\fy
()-
\fy\f\fy
2008 MDX

µ
Moves the seat forward
and backward.
Raises or lowers the seat.Moves the whole seat up
and f orward, or down
and backward. The front
of the seat also tilts up or
down at the same time.
Adjusts the seat-back
angle f orward or
backward.
Increases or decreases
the lumbar support.
(Driver’s seat only)
Moves the f ront of the
seat up or down.
The controls f or the power
adjustable front seats are on the
outside edge of each seat bottom.
You can adjust the seats with the
ignition switch in any position. Make
all seat adjustments bef ore you start
driving.
The passenger seat has the same
adjustments as the driver’s seat but
without any lumbar adjustment.
See pagesf or important saf ety
inf ormation and warnings about how toproperly position the seats and seat-backs. 1214
Seats
Front Seat Power A djustments
140
\f—\f—\fy\f\fy
()-
\fy\f
y
2008 MDX

See pagef or important saf etyinf ormation and a warning aboutimproperly positioning head restraints. 14
Your vehicle is equipped with head
restraints in all seating positions to
help protect you and your
passengers f rom whiplash and other
injuries.
They are most ef f ective when you
adjust them so the center of the back
of the occupant’s head rests against
the center of the restraint.The head restraints adjust f or height.
You need both hands to adjust the
restraint.Donotattempttoadjustit
while driving. To raise it, pull upward.
To lower the restraint, push the
release button sideways, and push
the restraint down.
CONT INUED
Head Restraints
Seats
A djust ing t he Head Rest raint
Inst rument s and Cont rols
141
RELEASE BUTTON
FRONT
SEAT-
BACK
LEGS CUSHION
\f—\f—\fy\f\fy
()-
\fy\f
y
2008 MDX

To remove a head restraint f or
cleaning or repair, pull it up as f ar as
it will go. Push the release button,
then pull the restraint out of the seat-
back.When reinstalling a head restraint,
put the legs back in place. Then
adjust it to the appropriate height
while pressing the release button.
Make sure the head restraint locks
in position when you reinstall it.
Seats
Removing t he Head Rest raint
142
RELEASE BUTTON
SECOND CENTER AND THIRD ROW
LEGS
CUSHION
Failure to reinstall the head
restraints can result in severe
injury during a crash.
Always replace the head
restraints before driving.
\f—\f—\fy\f\f\fy
()-
\fy\f
y
2008 MDX

CONT INUED
The driver’s and f ront passenger’s
seats have active head restraints. If
the vehicle is struck severely f rom
the rear, the occupant properly
secured with the seat belt will be
pushed against the seat-back and the
head restraint will automatically
move forward.This reduces the distance between
the restraint and the occupant’s head.
It also helps protect the occupants
against whiplash and injuries to the
neck and upper spine.
Af ter a collision, the activated
restraint should return to its normal
position.
If the restraints do not return to their
normal position, or in the event of a
severe collision, have the vehicle
inspected by an Acura dealer.
For a head restraint system to work
properly:
Do not hang any items on the head
restraints, or f rom the restraint
legs.
Do not place any object between
an occupant and the seat-back.
Install each restraint in its proper
location.
Only use genuine Acura
replacement head restraints.
Seats
A ct ive Head Rest raint s
Inst rument s and Cont rols
143
\f—\f—\fy\f\fy
()-
\fy\f
y
2008 MDX

To change the seat-back angle of the
seats in the second row, pull up on
thehandleontheoutsideof theseat-
back, and push the seat-back.
Overall, the seat-back has six
dif f erent positions.The left and right halves can be
f olded separately.
To unlatch the detachable anchor
bef ore f olding the seat-back, insert
the latch plate into the slot on the
side of the anchor buckle (see
page ) and allow the seat belt
to retract. Store the detachable
anchor and seat belt latch plates in
the retractor housing.
Lower the head restraints to their
lowest positions.
Pull up the handle on the outside
of the seat-back.
Fold the seat-back forward.
Reverse this procedure to return the
seat to the upright position. Make
sure the seat is locked securely
bef ore driving. Make sure that the folded seat-back
does not press against the f ront
passenger’s seat, as this could cause
the weight sensors to work
improperly.
2.
3.
1.
4. 146
Seats
A djusting the Second Row Seats Folding the Second Row Seats
144
HANDLE
\f—\f—\fy\f\fy
()-
\fy\f
y
2008 MDX

To get into the third row seats, pull
uptheleveronthesideof the
passenger’s side second row seat-
back. The seat-back will tilt f orward,
and then can be slid forward.
After you return the seat-back to the
upright position, push the whole seat
backwards until it latches. Make
sure the seat is f ully latched bef ore
sitting in it.Use the latch plate to release the
seat belt from the detachable
anchor (see page ).
Lower the head restraints to their
lowest positions.
To f old the third row seat,
the second row seat-back must be
f olded down or in the f ull up right
position.
Unlock the seat-back by pulling
the handle. Push the seat-back
forward.
Make sure the outer shoulder belts
are positioned on each hook on the
side panel whenever the third seat is
f olded.
1.
2.
3.
146
CONT INUED
T hird Row A ccess Folding the T hird Row Seat
Seats
Inst rument s and Cont rols
145
NOTE:
THIRD SEAT HANDLE
RELEASE LEVER
\f—\f—\fy\f
\fy
()-
\fy\f
\fy
2008 MDX

When the seats are returned to the
upright position, these detachable
anchors should be latched back
properly.
The seat belts in the second row
center seat and the third row seats
are equipped with detachable
anchors.
To unlatch the detachable anchor,
insert the latch plate into the slot on
the side of the anchor buckle. Store
the detachable anchor and seat belt
latch plates in the retractor housing.
Reverse this procedure to return the
seat to the upright position. Make
sure the seat is locked securely
bef ore driving. Reconnect the seat
belts to the detachable anchors.
Make sure all items in the cargo area
are secured. Loose items can f ly
f orward and cause injury if you have
to brake hard (See
on page ).
332 Detachable Anchor
Carrying Cargo
Seats
146
LATCH PLATE
Using a seat belt with the
detachable anchor unlatched
increases the chance of serious
injury or death in a crash.
Before using the seat belt,
make sure the detachable
anchor is correctly latched.
\f—\f—\fy\f

y
()-
\fy\f

y
2008 MDX