light Acura RDX 2009 User Guide

Î
Î
Î
Î
Î
Customize Menu
Customize Entry Customize Group Description Page Customize Setup
DOOR LOCK MODE
KEYLESS LOCK
ACKNOWLEDGEMENT
SECURITY RELOCK
TIMER
AUTO DOOR UNLOCK
CHG SETTING
(P.84)
DEFAULT ALL DOOR SETUP
(P.100)
Changes which doors unlock with the
remote transmitter in a first push.
The exterior lights flash each time you
press the LOCK or UNLOCK button. A
beeper will also sound when you press
the LOCK button twice.
Changes how long it takes (in seconds)
for the doors to relock and the security
system to set after you unlock but do not
open the door.
Changes when the system automatically
unlock the driver’s/all of the doors.
Returns all settings to the factory default. 103
105
107
109
83
DRIVER DOOR
ALL DOORS
ON
OFF
30 sec
60 sec
90 sec
DRIVER DOOR
WITH SHIFT TO P
ALL DOORS WITH
SHIFT TO P
DRIVER’S DOOR
WITH IGN OFF
ALL DOORS WITH
IGN OFF
OFF
SET
EXIT
: Default setting
Multi-Inf ormation Display
82
——

y

y
() yy
2009 RDX

Û
Ý
ÛÝ
You can customize some of the
vehicle control settings to your
pref erence. Here are the settings
you can customize:
METER SETUP
LIGHTING SETUP
DOOR SETUP
While CHG SETTING in the
CUSTOMIZE ENTRY is shown on
the multi-information display, press
the SEL/RESET button. The screen
changes to METER SETUP in the
CUSTOMIZE GROUP.
Each time you press the INFO ( / ) button, the screen changes as
shownonthenextpage.Pressthe
INFO( / )buttonuntilyousee
the setup you want to customize,
then press the SEL/RESET button
to enter your selection.
If DEFAULT ALL is not set, you will
see the above display for several
seconds, then the screen goes back
to CUSTOMIZE ENTRY. Repeat the
procedure to select DEFAULT ALL.
If you want to cancel DEFAULT
ALL, select EXIT, then press the
SEL/RESET button. The screen
goes back to CUSTOMIZE ENTRY.Change Settings
Multi-Inf ormation Display
84
\f—\f—

y

\fy
() \fy\f\fy
2009 RDX

Û
Ý
ÛÝ Press the SEL/RESET button. The
screen changes as shown above. The
highlighted number is the current
setting above or below the outside
temperature. Press the INFO ( /
) button repeatedly until the
number you want appears, then
press the SEL/RESET button to
enter your selection.
If you sometimes f ind that the
temperature reading is a f ew
degrees above or below the actual
temperature, you can adjust it by
f ollowing these instructions:
While METER SETUP is shown in
the CUSTOMIZE GROUP of the
multi-inf ormation display, press the
SEL/RESET button. The screen
changes to CUSTOMIZE MENU.
Press the INFO ( / ) button until
you see the above display.
CONT INUED
A djust Outside T emp. Display
Multi-Inf ormation Display
Inst rument s and Cont rols
89
U.S.
Canada
\f—\f—

y

y
() \fy\f\fy
2009 RDX

ÛÝÛ
Ý
ÛÝ
ÛÝ
There are two settings in the lighting
setup:INTERIOR LIGHT
DIMMING TIME
HEADLIGHT AUTO OFF TIMER
While CUSTOMIZE GROUP is
shown on the multi-inf ormation
display, select LIGHTING SETUP by
pressing the INFO ( / ) button,
then press the SEL/RESET button.
Each time you press the INFO ( / ) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
CONT INUED
Lighting Setup
Multi-Inf ormation Display
Inst rument s and Cont rols
95
See
page
96
See
page
98
: Press the SEL/RESET button or the select/
reset knob : Press the INFO ( / )
button or rotate the select/
reset knob
\f—\f—

y


y
() \fy\f
\f\fy
2009 RDX

ÛÝ
While LIGHTING SETUP is shown
in the CUSTOMIZE GROUP of the
multi-inf ormation display, press the
SEL/RESET button. You will see the
above display.
Press the SEL/RESET button. The
screen changes as shown above.
Select how long you want the lights
to stay on bef ore they f ade out (15,
30, or 60 seconds) by pressing the
INFO ( / ) button, then press the
SEL/RESET button to enter your
selection.
The interior lights f ade out when you
close all doors. You can change the
time that the interior lights fade out.
Int erior L ight Dimming T ime
Multi-Inf ormation Display
96
\f—\f—

y

y
() \fy\f
\f
y
2009 RDX

ÛÝ
To exit INTERIOR LIGHT
DIMMING TIME without changing
the current setting, select EXIT by
pressing the INFO ( / ) button,
then press the SEL/RESET button.
The screen goes back to
CUSTOMIZE MENU.
When your choice is set, you will see
the above display f or several seconds,
then the screen goes back to
CUSTOMIZE MENU.
If your choice is not set, you will see
the above display f or several seconds,
then the screen goes back to
CUSTOMIZE MENU. If this
happens, you need to repeat the
same procedure.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
97
\f—\f—

y

y
() \fy\f
\fy
2009 RDX

ÛÝ ÛÝ
The headlights, parking lights, side
marker lights, taillights, and license
plate lights go of f af ter the selected
time when you close the driver’s
door and take the remote with you.
To change how long the lights stay
on before they go off, follow these
instructions:
While LIGHTING SETUP is shown
in the CUSTOMIZE GROUP of the
multi-inf ormation display, press the
SEL/RESET button. The screen
changes to CUSTOMIZE MENU.
Press the INFO ( / ) button until
you see the above display.Press the SEL/RESET button. The
screen changes as shown above.
Select how long you want the lights
to stay on bef ore they go of f (0, 15,
30, or 60 seconds) by pressing the
INFO ( / ) button, then press the
SEL/RESET button to enter your
selection.
Headlight A uto Of f T imer
Multi-Inf ormation Display
98
\f—\f—

y

y
() \fy\f
\fy
2009 RDX

ÛÝ
To exit HEADLIGHT AUTO OFF
TIMER without changing the
current setting, select EXIT by
pressing the INFO ( / ) button,
then press the SEL/RESET button.
The screen goes back to
CUSTOMIZE MENU.
When your choice is set, you will see
the above display f or several seconds,
then the screen goes back to
CUSTOMIZE MENU.
If your choice is not set, you will see
the above display f or several seconds,
then the screen goes back to
CUSTOMIZE MENU. If this
happens, you need to repeat the
same procedure.
Multi-Inf ormation Display
Inst rument s and Cont rols
99
\f—\f—

y

y
() \fy\f
\fy
2009 RDX

ÛÝ
ÛÝ Press the SEL/RESET button. The
screen changes as shown above.
Select ON or OFF by pressing the
INFO ( / ) button, then press the
SEL/RESET button to enter your
selection.
While DOOR SETUP is shown in the
CUSTOMIZE GROUP of the multi-
inf ormation display, press the SEL/
RESET button. The screen changes
to CUSTOMIZE MENU. Press the
INFO ( / ) button until you see
the above display.
When you press the UNLOCK
button on the remote transmitter to
unlock the doors and the tailgate, the
exterior lights blink twice to verif y
that the doors and the tailgate are
unlocked and the security system is
turned off.
When you push the LOCK button on
the remote transmitter, some
exterior lights f lash, and a beeper
sounds when you push the LOCK
button again within 5 seconds to
verify that the doors and the tailgate
arelockedandthesecuritysystem
has set (see page ). You can
customize the exterior lights not to
f lash and the beeper not to sound.
127
CONT INUED
Multi-Inf ormation Display
K eyless L ock A cknowledgement
Inst rument s and Cont rols
105
\f—\f—

y

y
() \fy\f

\fy
2009 RDX

ÎÎÎ Î
ÎÎ
Î
Î
Î
Î
Î To use the horn, press the center pad of the steering wheel.
Ref er to the navigation system manual. On RDX model only
1:
2:
3:
4: On RDX with Technology Package model only
Controls Near the Steering Wheel
Inst rument s and Cont rols
111
CRUISE CONTROL
BUTTONS
SEAT HEATER SWITCHES
VEHICLE STABILITY
ASSIST (VSA) OFF
SWITCH
MIRROR CONTROLS PADDLE SHIFTERS
STEERING WHEEL
ADJUSTMENT
VOICE CONTROL
BUTTONS
HORN
HEADLIGHTS/TURN SIGNAL/
FOG LIGHTS
WINDSHIELD
WIPERS/WASHERS/
REAR WINDOW
WIPER/WASHER
BLUETOOTH
HANDSFREELINKBUTTONS MULTI-INFORMATION
BUTTONS
(P.114/115)
(P.297)
(P.112/113)
(P.234)
(P.72)
(P.119)
(P.313)
UPPER DISPLAY
(P.169)
NAVIGATION SYSTEM /
CENTER DISPLAY
(P.168)
PASSENGER AIRBAG
OFF INDICATOR
REAR WINDOW DEFOGGER/
HEATED MIRROR BUTTON
AUXILIARY INPUT JACK
ACCESSORY POWER
SOCKET
(P.32)
(P.220)
HAZARD WARNING BUTTON
(P.118)
REMOTE AUDIO CONTROL
BUTTONS (P.230)
(P.143)
(P.138)(P.154)
(P.118/144)
(P.251)
3, 4 1 3
3, 4
2
——

y


y
() y

y
2009 RDX