change time Acura RDX 2009 Owner's Guide

µµ
µ
When you press the UNLOCK
button, the ceiling lights (if the f ront
and rear ceiling light switches are in
the door activated position) will
come on. If you do not open any door,
the lights stay on for about 30
seconds, then f ade out. If you relock
the doors with the remote
transmitter before 30 seconds have
elapsed, the lights go of f
immediately.
Press this button once to
lock all doors and the tailgate. Some
exterior lights will f lash. When you
push LOCK twice within 5 seconds,
you will hear a beep to verify that the
doors and tailgate are locked and the
security system has set. This button
does not work if any door or tailgate
is not f ully closed.
To change the ‘‘KEYLESS LOCK
ACKNOWLEDGEMENT’’ setting,
see page . Press this button once
to unlock the driver’s door. Push it
twice to unlock the other doors.
Some exterior lights will f lash twice
when you push the button. If you do
not open any door or the tailgate
within 30 seconds, they will
automatically relock.
To change the ‘‘DOOR LOCK
MODE’’ setting, see page .
To change the ‘‘SECURITY
RELOCK TIMER’’ setting, see page . To change the ‘‘INTERIOR LIGHT
DIMMING TIME’’ setting, see page
.
Pressthisbuttonfor
about 1 second to attract attention;
the horn will sound, and the exterior
lights will f lash f or about 30 seconds.
To cancel panic mode, press any
button on the remote transmitter, or
turn the ignition switch to the ON
(II) position.
105 103
10796
LOCK UNL OCK
PA NIC
Remote Transmitter
Inst rument s and Cont rols
127
UNLOCK
BUTTONLOCK
BUTTON
PANIC
BUTTON
\f—\f—

y


y
() \fy\f
y
2009 RDX

Open any door.
Remove the key from the ignition
switch.
Unlock the doors with the key,
locktabonthedriver’sdoor,
master door lock switch, or
remote transmitter.
After all doors are closed tightly, the
light(s) dims slightly, then f ades out
in about 30 seconds. If you do not open any door af ter
unlocking the driver’s door or
removing the key from the ignition
switch, the light(s) f ade out in about
30 seconds. If you leave any door
open without the key in the ignition
switch, the light(s) will go of f af ter 3
minutes.
You can use the f ront ceiling lights
whenever the lights are of f .
To turn a light on or of f , push its lens.
In the door activated position, both
f ront and rear ceiling lights come on
when you:
To change the ‘‘INTERIOR LIGHT
DIMMING TIME’’ setting, see page.
96 Individual Map L ights
Interior Lights
Inst rument s and Cont rols
149
LENSES
\f—\f—

y

\fy
() \fy\f
y
2009 RDX

The courtesy lights in the ceiling
console come on when the light
switch is in the or theposition. You can adjust their
brightness by turning the select/
reset knob on the instrument panel. The cargo area light has a two
position switch. In the OFF (right)
position, the light does not come on.
In the ON (lef t) position, the light
comesonwhenyouopenthetailgate.
Your vehicle also has a courtesy light
in the ignition switch. This light
comesonwhenyou;
Unlock the driver’s door.
Remove the key from the ignition
switch.
Open any door.
The courtesy light in each f ront door
comes on when the door is opened,
and goes out when the door is closed.
After all doors are closed tightly, the
light f ades out in about 30 seconds.
To change the ‘‘INTERIOR LIGHT
DIMMING TIME’’ setting, see page
.
96
Courtesy Lights Cargo Area Light
Interior Lights
150
COURTESY LIGHTS
ON OFF
\f—\f—

y
\fy
() \fy\f
y
2009 RDX

If you press the OFF button, the
climate control system shuts of f
completely.
Air flows from the center
and corner vents in the dashboard.
Airf low is divided between
the vents in the dashboard and the
f loor vents.
Air f lows f rom the f loor
vents.
Airf low is divided between
the f loor vents and the def roster
vents at the base of the windshield. To keep stale air and mustiness
f rom collecting, you should have
the f an running at all times.
Keep the system of f f or short
periods only.
The mode indicator in the display
changes to the current mode each
time you press the button.
When the climate control system is
turned off, the temperature in the
display will also turn of f .
Use the MODE button to select the
vents the air flows from. Some air
will f low f rom the dashboard corner
vents in all modes.
To Turn Everything Off
Mode Button
Climate Control System
164
\f—\f—

y

y
() \fy\f
y
2009 RDX

To load a single disc:Press and release the LOAD
button on the changer unit. You
will see ‘‘BUSY’’ on the center
display, and the disc load indicator
turns red and starts blinking.
Insert a disc into the disc slot
when the disc load indicator turns
green and ‘‘LOAD’’ appears on the
center display at the same time.
Insert the disc only about half way;
the drive will pull it in the rest of
the way. You will see the disc
indicator blinking on the center
display.
To load multiple discs in one
operation:
When the disc load indicator turns
green and ‘‘LOAD’’ appears on the
center display again, insert the
next CD in the slot.
Do not try to insert a disc until
‘‘LOAD’’ appears. You could
damage the audio unit.
Repeat steps 1 through 3 until all
six positions are loaded. If you are
not loading all six positions, press
the LOAD button again after the
last CD has loaded. ‘‘DISC READ’’
appears on the center display, then
the system begins playing the last
CD loaded.
If you stop loading discs bef ore all
six positions are f illed, the system
will wait f or 10 seconds, stop the load
operation, and begin playing the last
disc loaded.
Press and hold the LOAD button
on the changer unit until you hear
a beep. You will see ‘‘BUSY’’ on
the center display, and disc load
indicator turns red and starts
blinking.
Insert the disc into the disc slot
when the disc load indicator turns
green and ‘‘LOAD’’ appears on the
center display at the same time.
Insert it only half way; the drive
will pull it in the rest of the way.
You will see ‘‘BUSY’’ on the center
display, and the disc load indicator
turns red again and blinks as the
CD is loaded.
Do not try to insert a disc until
‘‘LOAD’’ appears. You could
damage the audio unit.
1.
2.
3.
1.
2. 4.
Audio System
L oading CDs in the Changer
176
\f—\f—

y
y
() \fy\f

y
2009 RDX

µ
µ
µ
µ
µ
µ
µµ
The specif ications f or compatible
MP3 f iles are: If the title is too long, it will not show
all at once. Press and hold the DISP/
MODE button, and the rest of the
title will show on the upper display.
You will also see the album and track
name (CD-TEXT), or the f older and
f ile name (MP3/WMA) under these
conditions:
When you insert a disc, and the
system begins to play.
Each time a new track, file, or
folder plays.
Sampling f requency:
32/44.1/48 kHz (MPEG1),
16/22.05/24 kHz (MPEG2)
Bit rate:
32/40/48/56/64/80/96/112/128/
160/192/224/256/320 kbps
(MPEG1),
8/16/24/32/40/48/56/64/80/96/
112/128/160 kbps (MPEG2)
Compatible with variable bit rate
and multi-session.
Maximum layers
(including ROOT): 8 layers
The specif ications f or compatible
WMA f iles are: Sampling f requency:
32/44.1/48 kHz
Bit rate:
48/64/80/96/128/160/192 kbps
Compatible with variable bit rate
and multi-session. Maximum layers
(including ROOT): 8 layers
Each time you press the DISP/
MODE button while playing a CD
(CD-DA), the upper display changes
f rom album name, to track name, to
artist name, and then to normal
display. If the disc was not recorded
with CD-TEXT, ‘‘NO INFO’’ will be
shown on the upper display.
When playing a disc compressed in
MP3/WMA format, the display
changes f rom f older name, to f ile
name, to artist tag, to album tag, to
track tag, and then to normal display
each time you press the DISP/
MODE button. If the disc was not
recorded with this inf ormation, ‘‘NO
INFO’’willbeshownonthecenter
display.
Audio System
Name Display Funct ion
178
\f—\f—

y
\fy
() \fy\f
y
2009 RDX

µµ
µ
While a disc is playing you can use
the SEEK/SKIP bar to select
passages and change tracks (f iles in
MP3/WMA mode).
In MP3/WMA mode, use the
TUNE/FOLDER bar to select
f olders on the disc, and use the
SEEK/SKIP bar to change f iles.
Each time you
press and release the side of
the SEEK/SKIP bar, the system
skips forward to the beginning of the
next track (f ile in MP3/WMA mode).
Press and release the side of
the bar to skip backward to the
beginning of the current track/f ile.
Press it again to skip to the
beginning of the previous track/f ile. To
select a dif f erent f older, press and
releasethe sideof theTUNE/
FOLDERbartomovetothe
beginning of the next f older. Press
and release the side of the bar
to move to the beginning of the
current f older. Press it again to skip
to the beginning of the previous
f older.
This f eature, when
activated, continuously replays the
current track (f ile in MP3/WMA
mode). To activate it, press and
release the RPT button. You will see
‘‘RPT’’ on the center display. To turn
of f this f eature, press the RPT
button for more than 2 seconds.
To move rapidly within a track/f ile,
press and hold the or side
of the SEEK/SKIP bar.In MP3/WMA mode
CONT INUED
T o Change or Select T racks/FilesSEEK /SK IP
FOLDER SELECTION
REPEAT
Audio System
Features
179
\f—\f—

y

y
() \fy\f
y
2009 RDX

µ
µ µ
µ
In MP3/WMA mode In MP3/WMA mode
This feature,
when activated, replays all the f iles
on the current f older in the order
they are compressed in MP3/WMA.
To activate f older repeat mode, press
the RPT button twice. You will see
‘‘F-RPT’’ on the center display. Press
andholdtheRPTbuttonformore
than 2 seconds to turn off this
feature.
Press the RPT
button twice to continuously replay
the current CD. In MP3/WMA mode,
press the RPT button three times.
You will see ‘‘D-RPT’’ on the center
display. Press and hold the RPT
button for more than 2 seconds to
turn off this feature. The scan f unction samples
all the tracks (f iles in a f older in
MP3/WMA mode) of the current
disc in the order they are recorded
on the CD. To activate this feature,
press and release the SCAN button.
You will see ‘‘SCAN’’ and the track/
f ile number f lashing on the center
display. The system will then play
the track/f ile f or approximately 10
seconds. To hear the rest of the
track/file, press and hold the SCAN
button for more than 2 seconds. If
you do nothing, the system will then
play the f ollowing tracks/f iles f or 10
seconds each. When the system
f inishes scanning all the tracks/f iles
in the current disc, the system
returns to the track/f ile it f irst
started scanning with, scan is
canceled and the system begins to
play that track/file normally. The folder scan
f unction samples the f irst f ile of each
f older of the current disc in the
order they are compressed in MP3/
WMA. To activate this feature, press
the SCAN button twice. The first file
of each f older plays f or about 10
seconds. You will see ‘‘F-SCAN’’ and
the f older number f lashing on the
center display. To hear the rest of
the f ile in the f older currently
scanning, press and hold the SCAN
button for more than 2 seconds.
When the system f inishes scanning
all the f olders of the current disc, the
system returns to the f older it
started scanning with, f older scan is
canceled and the system begins to
play that folder normally.
Each time you press and release the
RPT button, the mode changes from
repeat to f older repeat, disc repeat
then to normal play.
FOLDER REPEAT
DISC REPEAT SCAN
FOLDER SCAN
Audio System
180
\f—\f—

y

y
() \fy\f
y
2009 RDX

µµ
µ
The disc scan
f unction samples the f irst track (f ile
in MP3/WMA mode) of each disc
within the changer in numerical
order. To activate this f eature, press
the SCAN button twice. In MP3/
WMA mode, press the SCAN button
three times. The f irst track/f ile of
each disc plays f or about 10 seconds.
You will see ‘‘D-SCAN’’ and disc
number f lashing on the center
display. To hear the rest of the
track/f ile in the disc currently
scanning, press and hold the SCAN
button for more than 2 seconds.
When the system f inishes scanning
all the discs, disc scan is canceled
and the system begins to play the
first track/file of that disc normally. This
f eature plays the f iles within a f older
in random order, rather than in the
order they are compressed in MP3/
WMA. To activate it, press the
A. SEL/RDM button once. You will
see ‘‘F-RDM’’ on the center display.
The system will then select and play
f iles randomly. This continues until
you deactivate folder random play by
pressing and holding the RDM
button for more than 2 seconds.
Each time you press and release the
SCAN button, the mode changes
f rom scan to f older scan, disc scan,
then to normal play.
This f eature plays the
tracks (all f iles in each f older in
MP3/WMA mode) within a disc in
random order. To activate it, press
and release the A. SEL/RDM button.
In MP3/WMA mode, press the
A. SEL/RDM button twice to select
random play within a disc. You will
see ‘‘RDM’’ on the center display.
Press and hold the A. SEL/RDM
button for more than 2 seconds to
return to normal play. Each time you press and release the
A. SEL/RDM button, the mode
changes f rom f older random to
random, then to normal play.In MP3/WMA modeDISC SCAN
FOLDER RANDOM
RANDOM (Random within a
Disc)
Audio System
Features
181
\f—\f—

y
y
() \fy\f
y
2009 RDX

To pause a disc, press the
corresponding number of the
current disc on the appropriate side
of the preset bars. To play the disc
again, press the preset bar again.
If you turn the system of f while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition
switch, the disc will stay in the drive.
When you turn the system back on,
the CD will begin playing where it
left off.Press and hold the eject button until
you hear a beep to remove all the
discs from the changer.
You can also eject discs when the
ignition switch is of f by pressing the
eject button. The disc that was last
selected is ejected f irst. You can
eject the rest of the discs one at a
time.
For inf ormation on how to handle
and protect compact discs, see page
.
For inf ormation, see page .
For inf ormation, see page .
To take the system out of CD mode,
press the AM or FM, CD/AUX, or
button. To return to CD
mode, press the CD/AUX button.
The system will continue at the same
point that it left off. To remove the disc that is currently
playing, press and release the eject
( ) button. You will see
‘‘EJECT’’ on the center display.
When you remove the disc f rom the
slot, the system begins the load
sequence so you can load another
disc in that position. If you do not
load another CD within 10 seconds,
the system selects the previous
mode (AM, FM1, FM2, or XM).
If you do not remove the CD f rom
the slot, the system will reload the
CD af ter 10 seconds and put the CD
changer in pause mode. To begin
playing the CD, press the CD/AUX
button.
To remove a dif f erent CD f rom the
changer, select it with the
appropriate side of the preset bar.
When that CD begins playing, press
the eject button.
223
226186
To Pause a Disc
To Stop Playing a Disc
Removing CDs f rom the Changer
Protecting Discs
CD Changer Error Messages
Adjusting the Sound
Audio System
182
\f—\f—

y
y
() \fy\f
y
2009 RDX