engine Acura RDX 2017 User Guide
[x] Cancel search | Manufacturer: ACURA, Model Year: 2017, Model line: RDX, Model: Acura RDX 2017Pages: 449, PDF Size: 10.88 MB
Page 63 of 449

62
Safe Driving
Exhaust Gas Hazard
Carbon Monoxide Gas
The engine exhaust from this vehicle contains carbon monoxide, a colorless, 
odorless, and highly toxic gas. As long as you properly maintain your vehicle, carbon 
monoxide gas will not  get into the interior.
■Have the exhaust system in spected for leaks whenever
• The exhaust system is m aking an unusual noise.
• The exhaust system may have been damaged.
• The vehicle is raised for an oil change.
When you operate a vehicle with the tailgat e open, airflow can pull exhaust gas into 
the interior and create a hazardous conditio n. If you must drive with the tailgate 
open, open all the windows and set the  climate control system as shown below.
1. Select the fresh air mode.
2. Select the   mode.
3. Set the fan speed to high.
4. Set the temperature control to a comfortable setting.
Adjust the climate control system in the  same manner if you sit in your parked 
vehicle with the engine running.
1 Carbon Monoxide Gas
An enclosed area such as a garage can quickly fill up 
with carbon monoxide gas.
Do not run the engine with the garage door closed. 
Even when the garage door is open, drive out of the 
garage immediately afte r starting the engine.
3WARNING
Carbon monoxide gas is toxic.
Breathing it can cause unconsciousness and 
even kill you.
Avoid any enclosed areas or activities that 
expose you to carbon monoxide. 
Page 68 of 449

67
uuIndicators u
Continued
Instrument Panel
*1:On the left: Models wi thout full color display 
On the right: Models with full color display
IndicatorNameOn/BlinkingExplanationMessage*1
Low Oil Pressure 
Indicator
●Comes on when you set the power 
mode to ON, and goes off when the 
engine starts.
●Comes on when the engine oil 
pressure is low.
●Comes on while driving - 
Immediately stop  in a safe place.
2If the Low Oil Pressure 
Indicator Comes On  P. 420
Malfunction 
Indicator Lamp
●Comes on when you set the power 
mode to ON, and goes off either when 
the engine starts or after several 
seconds if the engine does not start. If 
“readiness codes” have not been set, 
it blinks five times before it goes off.
●Comes on if there is a problem with 
the emissions control system.
●Blinks when a misfire in the engine’s 
cylinders is detected.
●Readiness codes are part of the 
on board diagnostics for the 
emissions control systems.
2Testing of Readiness Codes  
P. 435
●Comes on while driving - Have 
the vehicle checked by a dealer.
●Blinks while driving  - Stop in a 
safe place where there are no 
flammable objects. Stop the 
engine for 10 minutes or more, 
and wait for it to cool down. 
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator 
Lamp Comes On or Blinks  
P. 421 
Page 69 of 449

68
uuIndicators u
Instrument Panel
*1:On the left: Models without full color display 
On the right: Models with full color display
*2:Models with full color display
*3:Models without full color display
IndicatorNameOn/BlinkingExplanationMessage*1
Charging System 
Indicator
●Comes on when you set the power 
mode to ON, and goes off when the 
engine starts.
●Comes on when the battery is not 
charging.
●Comes on while driving  - Turn 
off the climate control system and 
rear defogger in order to reduce 
electricity consumption.
2 If the Charging System 
Indicator Comes On  P. 420
Shift Lever 
Position 
Indicator●Indicates current shift lever position.2Shifting P. 275——
Transmission 
Indicator
●Blinks if the transmission system has a 
problem.●Blinks while driving - Avoid 
sudden starts and acceleration 
and have the vehicle checked by a 
dealer immediately.
M (sequential 
shift mode) 
Indicator/Gear 
Position 
Indicator●Comes on when the manual 
sequential shift mode is applied.
2 Sequential Shift Mode  P. 277——
*2
*3
*2
*3
*2
*3 
Page 71 of 449

70
uuIndicators u
Instrument Panel
*1:On the left: Models without full color display 
On the right: Models with full color display
IndicatorNameOn/BlinkingExplanationMessage*1
Supplemental 
Restraint System 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
●Comes on if a problem with any of 
the following is detected:
-Supplemental restraint system
- Side airbag system
- Side curtain airbag system
- Seat belt tensioner
●Stays on constantly or does not 
come on at all  - Have the vehicle 
checked by a dealer.
All-Wheel Drive 
( AWD ) with 
Intelligent 
Control System 
Indicator
*
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
●Comes on if there is a problem with 
the  AWD  with intelligent control 
system.
●Blinks when the  AWD with 
intelligent control system is 
overheated. The system is inactive.
●Stays on constantly  - the engine 
drives only the front wheels in this 
state. Have the vehicle checked by a 
dealer.
●Blinks while driving  - the engine 
drives only the front wheels in this 
state. Stop in a safe place, shift to 
(P, 
and idle the engine until the indicator 
goes off. If the indicator does not 
stop blinking, take your vehicle to a 
dealer.
2 All-Wheel Drive (AWD) with 
Intelligent Control System* 
P. 314
—
—
* Not available on all models 
Page 73 of 449

72
uuIndicators u
Instrument Panel
*1:On the left: Models without full color display 
On the right: Models with full color display
*2:Models without full color display
IndicatorNameOn/BlinkingExplanationMessage*1
Door and 
Tailgate Open 
Indicator
*
●Comes on for a few seconds if you 
set the power mode to ON, then 
goes off.
●Comes on if any door or the tailgate 
is not completely closed.
●The beeper sounds and the indicator 
comes on if any door or the tailgate 
is opened while driving.
●Goes off when all doors and the 
tailgate are closed.
—
—
—
Electric Power 
Steering (EPS) 
System 
Indicator
●Comes on when you set the power 
mode to ON, and go es off when the 
engine starts.
●Comes on if there is a problem with 
the Electric Power Steering (EPS) 
System.
●Stays on constantly or does not 
come on at all  - Have the vehicle 
checked by a dealer.
2 If the Electric Power Steering 
(EPS) System Indicator Comes 
On  P. 422
*2
* Not available on all models 
Page 75 of 449

74
uuIndicators u
Instrument Panel
*1:On the left: Models without full color display 
On the right: Models with full color display
IndicatorNameOn/BlinkingExplanationMessage*1
Lights On 
Indicator
●Comes on whenever the light 
switch is on, or in  AUTO when the 
exterior lights are on.●If you set the power mode to 
ACCESSORY or VEHICLE OFF (LOCK) 
while the lights are on, a chime sounds 
when the driver’s door is opened.
——
Fog Light 
Indicator*
●Comes on when the fog lights are 
on.———
Immobilizer 
System Indicator
●Comes on briefly when you set the 
power mode to ON, then goes off.
●Comes on if the immobilizer system 
cannot recognize the key 
information.
●Blinks  - You cannot start the engine. 
Set the power mode to VEHICLE OFF 
(LOCK), then select the ON mode 
again.
●Repeatedly blinks  - The system may 
be malfunctioning. Have the vehicle 
checked by a dealer.
●Do not attempt to alter this system or 
add other devices to it. Electrical 
problems can occur.
——
* Not available on all models 
Page 83 of 449

82
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
Multi-Information Display Warn ing and Information Messages
The following messages appear only on the  multi-information display. Press the   /    (information) button to see the message again 
with the system me ssage indicator on.
*1:On the left: Models without full color display  On the right: Models with full color display
Message*1ConditionExplanation
●Appears when the fuel fill cap is loose or is 
not installed.
2Tighten Fuel Cap Message  P. 421
—
●Appears when the washer fluid is low.
●Refill washer fluid.
2Refilling Window Washer Fluid  P. 362
●Appears while you are customizing the 
settings and the shift lever is moved out of 
(P.2Customized Features  P. 100, 106
●Appears when the transmission fluid 
temperature is too high.●Stop in a safe place in (P. Let the engine 
idle until the message disappears.
Canadian models 
Page 84 of 449

83
uuIndicators uMulti-Information Display Warning and Information Messages
Continued
Instrument Panel
*1:On the left: Models wi thout full color display 
On the right: Models with full color display
Message*1ConditionExplanation
●Appears when the scheduled maintenance is 
due soon.
●Consequently, SERVICE DUE NOW /
Maintenance Due Soon  and SERVICE PAST 
DUE /Maintenance Past Due  follow.2Maintenance Minder Messages on the 
Multi-Information Display  P. 348
●Appears when the engine coolant 
temperature gets abnormally high.
2Overheating  P. 418
●Appears when there is a problem with the 
power tailgate system.●Manually open or close the power tailgate.●Have the vehicle checked by a dealer.
—
U.S.U.S.
Canada 
Page 85 of 449

84
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
*1:On the left: Models without full color display 
On the right: Models with full color display
Message*1ConditionExplanation
●Appears if there is a problem with the starting 
system.●As a temporary measure, press and hold the 
ENGINE START/STOP  button for 15 
seconds while depressing the brake pedal 
and manually start the engine. 
Have the vehicle checked by a dealer.
—
●Appears after you unlock and open the 
driver’s door.
2 Starting the Engine  P. 268
●Appears three seconds after the  TO START 
ENGINE/ To Start Engine  message appears.
2Starting the Engine  P. 268
●Appears when the steering wheel is locked.●Move the steering wheel left and right after 
pressing the ENGINE START/STOP  button.
U.S.U.S.
Canada 
Page 86 of 449

85
uuIndicators uMulti-Information Display Warning and Information Messages
Continued
Instrument Panel
*1:On the left: Models wi thout full color display 
On the right: Models with full color display
Message*1ConditionExplanation
●Appears if you press the  ENGINE START/
STOP  button to turn the engine off without 
the shift lever in 
(P.
●Press the  ENGINE START/STOP button twice 
after moving the shift lever to 
(P.
●Appears when the power mode is in 
ACCESSORY.
—
●Appears after the driver’s door is opened 
when the power mode is in ACCESSORY.●Press the  ENGINE START/STOP button twice 
with your foot off the brake pedal to change 
the power mode to  VEHICLE OFF (LOCK).
●Appears when you close the door with the 
power mode in ON without the keyless access 
remote inside the vehicle.●The message goes off when you bring the 
keyless access remote back inside the vehicle, 
and close the door.
2Keyless Access Remote Reminder  P. 146