clock reset Acura RL 2000 3.5 Owner's Manual

Digita
l Cloc k

To set the clock: 1. Turn the ignition switch ON (II) to
display the time.

2. Swing down the front cover of the wide button to the right of the
clock display. You will see HOUR,

MIN., and RESET buttons.
3. Press and hold the HOUR button
until the hour advances to the

desired hour.

4. Press and hold the MIN. button until the numbers advance to the
desired time.
You can use the RESET button to
quickly set the time to the nearest
hour. If the displayed time is before
the half hour, pressing RESET
button sets the clock back to the
previous hour. If the displayed time is after the half hour, pressing the
RESET button sets the clock for-
ward to the beginning of the next
hour.
For example: 1:06 would RESET to 1:00.
1:52 would RESET to 2:00.

Instrument s an d Control s

HOU
R
MIN.
RESET

Light
s

8. Reset the fastener by pushing on the pointed end until it pops backalmost flush with the fingers on
the housing.
9. Put the fastener in the hole in the side of the trunk lining and push
on the center until it locks (the
center is flush with the head). Replacin
g a High-moun t Brak e
Ligh t Bul b
1. Open the trunk and remove the socket from the light assembly by
turning it one-quarter turn counter-
clockwise.

2. Remove the bulb by pushing it in slightly and turning it counter-

clockwise.

Install the new bulb in the socket. 3. Reinstall the socket. Turn it
clockwise until it locks.
4. Test the lights to make sure the new bulb is working.

Maintenance