deactivate airbag Acura RL 2001 3.5 Owner's Manual

Additional Information About Your Seat Belts

If the shoulder part of the belt is
pulled all the way out, the locking mechanism will activate. The belt
will retract, but it will not allow the passenger to move freely.
To deactivate the locking mechanism, unlatch the buckle and
let the seat belt fully retract. To refasten the belt, pull it out only as
far as needed.
See page 15 for instructions on how
to wear the lap/shoulder belt
properly. Automatic Seat Belt Tensioners
For added protection, the front seat
belts are equipped with automatic
seat belt tensioners. When activated,
the tensioners immediately tighten
the belts to help hold the driver and
a front passenger in place.
The tensioners are designed to activate primarily in frontal collisions.
The tensioners are independent of the airbag system, so they can beactivated during a collision that might not cause the airbags to
deploy. In this case, the airbags
would not be needed but the additional seat belt tension can behelpful.
The tensioners will be activated in a collision severe enough to cause the
front airbags to inflate.
When the tensioners are activated, the seat belts will remain tight until
they are unbuckled in the normal
way.
The SRS indicator light willcome on if there is a
problem with your automatic seat
belt tensioners (see page 45).
Driver and Passenger Safety
SRS

Additional Information About Your Airbags
Airbag Service
Your front and side airbag systemsare virtually maintenance-free, and
there are no parts you can safely service. However, you must have
your car serviced if:
Your airbags ever inflate. Any

airbag that has deployed must be
replaced along with the control
unit and other related parts. Do
not try to remove or replace any
airbag by yourself. This must be done by an Acura dealer or a
knowledgeable body shop. The SRS indicator light alerts you
to a problem. Take your car to an
authorized Acura dealer as soon as
possible. If you ignore this
indication, the airbags might not
inflate when you need them. Additional Safety Precautions Do not attempt to deactivate your

airbags. Together, airbags and

seat belts provide the best
protection. Do not tamper with airbag
components or wiring for any
reason. Tampering could cause
the airbags to deploy, possibly
causing very serious injury.
Do not expose the front seat-backs
to water. If rain or spilled water

soaks into a seat-back, it can

prevent the side airbag system

from working properly.
Do not cover or replace front seat-

back covers without consulting an
Acura dealer. Improperly replacing or covering front seat-
back covers can prevent your sideairbags from inflating during a
collision.
See page 175 for further information and precautions relating to your
airbags.

Driver and Passenger Safety