display Acura RL 2002 3.5 User Guide

To put the Automatic Climate
Control in f ully-automatic mode,
press the AUTO button and set the
f an control dial to AUTO, then set
the desired temperature by turning
the temperature control dial. You will
see FULL AUTO in the system’s
display. The light above thebuttonalsoshowsyouwhich
mode, Recirculation or Fresh Air, is
selected.
When you set the temperature to its
lower limit (60°F/18°C) or its upper
limit (90°F/32°C), the system runs
at f ull cooling or heating only. It does
not regulate the interior temperature. When the temperature is set
between the lower and upper limits,
the system regulates the interior
temperature to the set value.
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature f rom its current level to
the set temperature.
In cold weather, the fan will not
come on automatically until the car
has been driven f or a short time and
the heater starts to develop warm air.Pressing the OFF button shuts the
climate control system completely
of f . Keep the system completely of f
only f or short periods. To keep stale
air and mustiness f rom collecting,
you should have the f an running at
all times.
Climat e Cont rol Syst em
Comf ort and Convenience Feat ures
Fully-automatic Operation
3.5 RL wit h Navigat ion Syst em
121
F FU
UL LLL A
AU
UT TO
O
D
D I
ISSP PL
LAA Y
Y
O
OF FFF
B
BU UT TT
TO
ON N A
A
U
UT TO
O
B
BU UT TT
TO
ON N
T
T
E
EM
M P
PE
ER
RA A T
TU
UR REE
C
CO ON NTTR
RO OL L D
DI
IAA L
L
F
FA
A N
N C
COON NTTR
RO OL L
D
D I
IAA L
L
01/09/28 19:44:25 31SZ3660_124

You can manually select various
f unctions of the Climate Control
system when it is in FULL AUTO.
All other f eatures remain auto-
matically controlled. Making any
manual selection causes the word
FULL to go out.
When you turn the A/C of f , the sys-
tem cannot regulate the inside tem-
perature if you set the dial below the
outside temperature. With the A/C
on, use the temperature control dial
to adjust the temperature of the air
flow to a comfortable setting.With the A/C in economy mode, you
will see A/C ECON in the system’s
display. Use this mode to get better
f uel economy.
Press the A/C button to operate the
air conditioning. Each time you press
the A/C button, the display shows
the mode: A/C ECON, A/C OFF, or
A/C ON.
In this mode, you may f eel a slight re-
duction in cooling ef f iciency. If you
want more cooling, select A/C ON or
FULL AUTO.
Semi-automatic Operation
A ir Condit ioning (A /C) But t on
Climat e Cont rol Syst em
Comf ort and Convenience Feat ures122
R RE
EC
CI IRRC CUUL LAA T
TI
IOON N B
BUUT TT
TO
ON N T
T
E
EM
M P
PE
ER
RA A T
TU
UR REE
C
CO ON NTTR
RO OL L D
DI
IAA L
L
A
A
I
IRR C
COON NDDI
ITT I
IOON NIINNG G
B
BU UT TT
TO
ON N
01/09/28 19:44:34 31SZ3660_125

CONT INUED
This button controls the source of
the air going into the system. When
the indicator above this button is lit,
air f rom the car’s interior is sent
through the system again (Recircula-
tion mode). When the indicator is off,
air is brought in f rom outside the car
(Fresh Air mode).
You can, f or example, manually put
the system in recirculation mode
when driving through an area of
smoke or f umes.
You can manually select the f an
speedbyturningthefancontroldial.
When you turn the dial clockwise,
the fan is taken out of automatic
mode and starts to run at its lowest
speed. Turning the dial f ully
clockwise increases the f an’s speed,
which increases air flow.Use the MODE button to select the
vents the air flows from. Some air
will f low f rom the side vents and the
dashboard corner vents in all modes.
Each time you press the MODE
button, the display shows the mode
selected. Press the button four times
to see all the modes.
Mode Button
Recirculat ion But t on
Fan Cont rol Dial
Climat e Cont rol Syst em
Comf ort and Convenience Feat ures123
R REEC
CI IRRC CUUL LAA T
TI
IOON N B
BUUT TT
TO
ON N
F
FA
A N
N C
COON NTTR
RO OL L D
DI
IAA L
L M
MO
ODDE
E B
BUUT TT
TO
ON N
01/09/28 19:44:45 31SZ3660_126

µµ
µ
µ´ ´ µ
You can use any of three methods to
f ind radio stations on the selected
band: TUNE, SEEK, or the Preset
buttons.
Use the TUNE knob to
tune the radio to a desired f requency.
Turn the TUNE knob to the right to
tune to a higher f requency, or to the
lef t to tune to a lower f requency.
Turn the knob right or lef t until the
display reaches the desired
f requency. You can store the
f requencies of your f avorite radio
stations in the six preset buttons.
Each button will store one f requency
on the AM band, and two
f requencies on the FM band.
The SEEK f unction
searches the band for a station with
a strong signal. To activate it, push ei-
ther side of the SEEK/SKIP buttons
( or ). Push the button to
scan up f rom the current f requency,
andthe buttontoscandown.It
stops when it finds a station with a
strong signal.
The band and f requency that the ra-
dio was last tuned to is displayed. To
change bands, press the AM/FM but-
ton. On the FM band, ST will be dis-
played if the station is broadcasting
in stereo. ST will flash if you are driv-
inginanareawheretheradiosignal
is weak. Stereo reproduction on AM
is not available. The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pushing the PWR/
VOL knob or the AM/FM button.
Adjust the volume by turning the
knob.
CONT INUED
TUNE
Preset
SEEK
Operating the Radio
Audio System
Comf ort and Convenience Feat ures
3.5 RL wit hout Navigat ion Syst em
129
01/09/28 19:45:42 31SZ3660_132

µIf you are
traveling far from home and can no
longer receive the stations you
preset, you can use the Auto Select
feature to find stations in the local
area.
To activate Auto Select, press the
A. SELECT button. A. SELECT will
appear in the display, and the system
will go into scan mode f or several
seconds. It automatically scans both
bands, looking f or stations with
strong signals. It stores the f requen-
cies of six AM stations and twelve
FM stations in the preset buttons.
You can then use the preset buttons
to select those stations.
If you are in a remote area, Auto
Select may not f ind six strong AM
stations or twelve strong FM stations.
If this happens, you will see a ‘‘0’’
displayed when you press any preset
button that does not have a station
stored. With Auto Select on, you cannot
manually store any f requencies in
the preset buttons. If you do not like
the stations found by Auto Select,
you can use the TUNE and SEEK
f unctions to f ind other stations.
Auto Select does not erase the
f requencies that you preset pre-
viously. When you return home, turn
of f Auto Select by pressing the
A. SELECT button. The preset
buttons will then select the fre-
quencies you originally set.
AUTO SELECT
Audio System
Comf ort and Convenience Feat ures131
A A
M
M /
/F
FM M B
BUUT TT
TO
ON NA
A
U
UT TO
O S
SEEL
LEE C
CT T I
INND DI
ICCA A T
TO
OR R
A
A U
UT TO
O S
SEEL
LEE C
CT T B
BUUT TT
TO
ON N
P
P R
RE ES
SE ET
T B
BUUT TT
TO
ON NSS T
T
U
UN NEE
K
KN NO OBB
S
SE EE
EK
K/ /S
SK KIIPP
B
BU UT TT
TO
ON NSS
01/09/28 19:46:00 31SZ3660_134

µ
With a cassette playing, you can use
the FF, REW, TMS, or REPEAT
f unction to f ind a desired program.
Fast Forward and Re-
wind move the tape rapidly. To re-
wind the tape, push the REW button.
You will see REW in the display. To
fast forward the tape, push the FF
button. You will see FF displayed.
Press the PROG/PLAY button to
take the system out of rewind or fast
f orward. When the system reaches
the end of the tape, it reverses
direction and begins to play if in f ast
f orward, or it begins to play if in
rewind.
Audio System
Comf ort and Convenience Feat ures
T ape Search Functions
FF/REW
134
A A M
M /
/F
FM M B
BUUT TT
TO
ON N
T
T M
M S
SI
INND DI
ICCA A T
TO
OR R
D
D O
OL LBBY Y I
INND DI
ICCA A T
TO
OR R
E
EJ
JEE C
CT T
B
BU UT TT
TO
ON N
R
RE EP
PE
EA
A T
T
I
IN ND DI
ICCA A T
TO
OR R
R
RE EP
PE
EA
A T
T
B
BU UT TT
TO
ON N
T
T M
M S
S
B
BU UT TT
TO
ON N
D
D O
OL LBBY Y B
BUUT TT
TO
ON N
F
FA A S
STT F
FOOR RWWA AR
RDD
B
BU UT TT
TO
ON N
C
CD
D /
/T
T A
A P
PE
E B
BUUT TT
TO
ON N
R
RE
EW
WI INND D
B
BU UT TT
TO
ON N
P
P
R
RO OG G//P
P L
LAA Y
Y
B
BU UT TT
TO
ON N
T
T
A
A P
PE
E
D
D I
IRRE EC
CT TI
IOON N
I
IN ND DI
ICCA A T
TO
OR R
P
P
W
WR R//V
V O
OL L K
KNNO OBB
C
CA
A S
SSSEET
TT
TE
E S
SLLOOT T
01/09/28 19:46:32 31SZ3660_137

µTheTapeMusicSearch
Function allows you to f ind the begin-
ning of a song or passage. To acti-
vate TMS, press the TMS button.
You will see TMS displayed. To f ind
the beginning of the song or passage
currently playing, push the REW but-
ton. You will see REW f lashing in the
display as the tape rewinds. To f ind
the beginning of the next song, push
the FF button. You will see FF
flashing in the display as the tape
f ast f orwards. When the system
f inds the beginning of a song or pas-
sage, it goes back to PLAY mode.
Press the TMS button again to turn
it off.
CONT INUED
Audio System
Comf ort and Convenience Feat ures
TMS
135
P P W
WR R//V
V O
OL L K
KNNO OBB
T
T A
A P
PE
E
D
D I
IRRE EC
CT TI
IOON N
I
IN ND DI
ICCA A T
TO
OR R
R
RE EW
WI INND D
B
BU UT TT
TO
ON N E
E
J
JEE C
CT T
B
BU UT TT
TO
ON N
R
RE EP
PE
EA
A T
T
I
IN ND DI
ICCA A T
TO
OR R
R
RE EP
PE
EA
A T
T
B
BU UT TT
TO
ON N
F
FA A S
STT F
FOOR RWWA AR
RDD
B
BU UT TT
TO
ON N
C
CA
A S
SSSEET
TT
TE
E S
SLLOOT T
T
T M
M S
SI
INND DI
ICCA A T
TO
OR R
T
TM
M S
SB
BUUT TT
TO
ON N
01/09/28 19:46:40 31SZ3660_138

µThe Repeat f unction
continuously replays the current
song or passage. Press the REPEAT
button to activate it; you will see RPT
displayed as a reminder. When the
system reaches the end of the song
or passage currently playing, it will
automatically go into rewind.
When it senses the beginning of the
same song or passage, the system
returns to PLAY mode. It will
continue to repeat this same
program until you deactivate
REPEAT by pressing the button
again. The TMS and REPEAT f unctions
use silent periods on the tape to f ind
the end of a song or passage. These
f eatures may not work to your
satisfaction if there is almost no gap
between selections, a high noise
level between selections, or a silent
period in the middle of a selection.
Damaged cassettes can jam inside
the drive or cause other problems.
See page for information on
cassette care and protection.
A Compact Disc changer is standard
equipment. It holds up to six discs,
providing several hours of continu-
ous entertainment. You operate the
CD changer with the same controls
used f or the radio and cassette
player.
To load the CDs in the magazine and
load the magazine into the CD
changer, refer to page . Play only
standard round discs. Odd-shaped
CDs may jam in the drive or cause
other problems.
Pressing the REW or FF button also
turns of f REPEAT. Do not play discs with disc accessories such as protective seals
or rubbers. Using them may also
cause the audio system to
malf unction.159
148
Audio System
Comf ort and Convenience Feat ures
REPEAT
Caring f or CassettesOperating the CD Changer
136
01/09/28 19:46:51 31SZ3660_139

µ
CONT INUED
To operate the CD changer, the igni-
tion switch must be in ACCESSORY
(I) or ON (II).
SelecttheCDmodebypressingthe
CD/TAPE button. You will see ‘‘CD’’
in the display. The system will start
to play the first track of the first disc
in the magazine. You will see the
disc and track number displayed.
When that disc ends, the next disc in
the magazine is loaded and played.
Af ter the last disc f inishes, the
system returns to disc 1.
To select a dif f erent disc, press the
appropriate preset button (1 6). If
you select an empty slot in the
magazine, the changer will, af ter
f inding that slot empty, try to load
the CD in the next slot. This
continues until it f inds a CD to load
and play.
Audio System
Comf ort and Convenience Feat ures137
C CDD /
/T
T A
A P
PE
E B
BUUT TT
TO
ON N
P
P W
WR R//V
V O
OL L
K
KN NO OBB
A
A M
M /
/F
FM M
B
BU UT TT
TO
ON N
P
PR
RE ES
SE ET
T B
BUUT TT
TO
ON NSS A
A
U
UT TO
O
S
SE EL
LEE C
CT T
B
BU UT TT
TO
ON N
S
SE
EE
EK
K/ /S
SK KIIPP
B
BU UT TT
TO
ON NSS
R
RE
EP
PE
EA
A T
T
B
BU UT TT
TO
ON N
A
A
.
.SSE EL
LEE C
CT T I
INND DI
ICCA A T
TO
OR R
R
RE EP
PE
EA
A T
T I
INND DI
ICCA A T
TO
OR R
01/09/28 19:46:59 31SZ3660_140

µ´
´
µ µ
µ
You can use the SEEK/SKIP buttons
to select tracks within a disc. If you
push and release either side of the
SEEK/SKIP buttons ( or ), the
system will move to the beginning of
a track. Push the button to move
to the beginning of the next track,
and push the button to move to
the beginning of the current track.
If you push and hold the SEEK/
SKIP button, you will hear a beep
and the system will continue to move
across tracks. Release the button
when you think it has reached the de-
sired place on the disc. When you activate the
Repeat feature by pressing the
REPEAT button, the system continu-
ously replays the current track. You
will see RPT in the display as a
reminder. Press the REPEAT button
again to turn it off.
This feature,
when activated, plays the tracks on a
CD in random order, rather than in
the order they are recorded on the
CD. To activate Random Play, press
the A. SELECT button. You will see
A. SELECT in the display. The sys-
tem will then select and play tracks
randomly on the current disc. When
all tracks on that disc have been
played, the next disc is loaded and
played randomly. This continues un-
til you deactivate Random Play by
pressing A. SELECT again. To take the system out of CD mode,
press the AM/FM button or insert a
cassette in the player. If a tape is
already in the cassette player, press
the CD/TAPE button. When you
return to CD mode, play will contin-
ue at the same point that it left off.
If you turn the system of f while a CD
is playing, either with the PWR/VOL
knob or the ignition switch, play will
continue at the same point when you
turn it back on.
For inf ormation on how to handle
and protect compact discs, see page
.
153
Audio System
Comf ort and Convenience Feat ures
REPEAT
RANDOM PLAY
Protecting Compact Discs
138
01/09/28 19:47:09 31SZ3660_141