jump cable Acura RL 2004 3.5 Owner's Manual

µ
´
´ Connect the second jumper cable
to the negative ( ) terminal on
the booster battery. Connect the
other end to the ground wire on
therightsideof theengineas
shown. Do not connect this jumper
cable to any other part of the
engine.
Connect one jumper cable to the
positive ( ) terminal on your
Acura’s battery. Connect the other
end to the positive ( ) terminal
on the booster battery.
Turn of f all the electrical acces-
sories: climate control, stereo
system, lights, etc.
Put the transmission in Neutral or
Park, and set the parking brake.
If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.
5. 4.
3.
2.
CONT INUED
T aking Care of t he Unexpect ed
Jump Starting
317
If a battery sits in extreme cold, the
electrolyte inside can f reeze.
Attempting to jump start with a f rozen
battery can cause it to rupture.

Once your car is running, discon-
nectthenegativecablefromyour
car, then from the booster battery.
Disconnect the positive cable f rom
your car, then the booster battery.
Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until all are
disconnected. Otherwise, you may
cause an electrical short.
Start your car. If the starter motor
still operates slowly, check the
jumper cable connections to make
sure they have good metal-to-
metal contact.
Follow the number order in the
illustration to connect the jumper
cables. Make sure to disconnect the
cables in the reverse order.
6. 7.
Jump Starting
T aking Care of t he Unexpect ed318
BOOSTER BATTERY