display Acura RL 2005 Owner's Guide

Û
ÝMemory Position Link Auto Tilt & TelescopicSelect ON or OFF by pressing the
or button, and enter your
selection by pressing the SEL/
RESET button.
When you turn the ignition switch to
LOCK (0) and release it, or remove
the built-in key f rom the ignition
switch, the steering wheel
automatically moves f ully in and up.
You can turn this feature on or off.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
When you unlock the doors by
pressing the button on the remote or
by grabbing the driver’s door handle
while carrying the remote, the
driver’s ID (Driver 1 or Driver 2) is
recognized, and the driver’s seat, the
steering wheel, and the outside
mirror positions move to their
memorized positions.
You can turn this feature on or off. The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
Multi-Inf ormation Display
86

Û
Ý
Select ON or OFF by pressing the
or button, and enter your
selection by pressing the SEL/
RESET button.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button. The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
Multi-Inf ormation Display
Inst rument s and Cont rols
87

Û
Ý
ÛÝ
Each time you press the INFO ( / ) button, the display changes as
shown in the illustration.
Here are the settings you can
customize in this mode: DOOR UNLOCK MODE
KEYLESS ACCESS
LIGHT FLASH
KEYLESS ACCESS BEEP
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again. With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Select KEYLESS ACCESS SETUP,
and press the SEL/RESET button.
Multi-Inf ormation Display
K EYL ESS A CCESS Setup
88
Press the or button.
Press the SEL/RESET button.

ÛÝ
Door Unlock ModeKeyless Access Light FlashThe conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
You can select whether the driver’s
door unlocks or all the doors unlock
when you unlock the doors by
grabbing the driver’s door handle
while carrying the remote.
Select the desired mode by pressing
the or button, and enter your
selection by pressing the SEL/
RESET button. When you unlock the doors by
grabbing the driver’s door handle
while carrying the remote, some
exterior lights will blink twice.
When you lock the doors touching
the door lock sensor while carrying
the remote, some exterior lights will
blink once.
You can turn this feature on or off.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
89

Û
Ý
Û
Ý Select ON or OFF by pressing the
or button, and enter your
selection by pressing the SEL/
RESET button.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
Select ON or OFF by pressing the
or button, and enter your
selection by pressing the SEL/
RESET button.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button. The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
If you unlock the doors by grabbing
the driver’s door handle while
carrying the remote, the beeper
sounds twice. When you lock the
doors, the beeper sounds once.
You can turn this feature on or off.The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.Keyless Access Beep
Multi-Inf ormation Display
90

ÛÝ
ÛÝ
Each time you press the or
button, the screen changes as shown
in the illustration.
Here are the settings you can
customize in this mode:INTERIOR LIGHT
DIMMING TIME
HEADLIGHT AUTO OFF TIMER
AUTO LIGHT SENSITIVITY
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again. With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Select LIGHTING SETUP, and press
the SEL/RESET button.
CONT INUED
Lighting Setup
Multi-Inf ormation Display
Inst rument s and Cont rols
91
Press the or button.
Press the SEL/RESET button.

ÛÝÛ
Ý
Interior Light Dimming Time Headlight Auto Of f Timer
The interior lights f ade out when you
close all doors (see page ). Select
how long it takes f or the interior
lights to f ade out (in seconds) f rom
60 SEC, 30 SEC, or 15 SEC by
pressing the or button, and
enter your selection by pressing the
SEL/RESET button.Select how long it takes f or the
exterior lights to turn of f (in
seconds)from60SEC,30SEC,15
SEC,or0SEC,bypressingthe or
button, and enter your selection
by pressing the SEL/RESET button.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns. The headlights, parking lights, side
marker lights, taillights, and license
plate light turn of f af ter the selected
time when you close the driver’s
door and take the remote with you.
160
Multi-Inf ormation Display
92

µµ µ
µ
ÛÝ
µ
Auto Light Sensitivity
The headlights automatically come
on when the headlight switch is in
the AUTO position and ambient light
reaches a customizable level.
You can select the auto light
sensitivity.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
MAX
Theheadlightscomeonwhenitis
bright.
HIGH
Theheadlightscomeonwhenitissomewhat bright.
LOW
Theheadlightscomeonwhenitis
somewhat dark.
MIN
Theheadlightscomeonwhenitis
dark.
Select f rom the f ive levels of
sensitivity by pressing the or
button, and enter your selection by
pressing the SEL/RESET button.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
MID
Theheadlightscomeonwhenitisas
bright as sunset or sunrise.
The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
Multi-Inf ormation Display
Inst rument s and Cont rols
93

Û
Ý
With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button. Select DOOR/WINDOW SET UP,
and press the SEL/RESET button.
Each time you press the INFO ( /
) button, the display changes as
shown in the illustration.
Here are the settings you can
customize in this mode:
DOOR LOCK MODE AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEYLESS LOCK
ACKNOWLEDGEMENT
SECURITY RELOCK TIMER If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again.
Door/Window Setup
Multi-Inf ormation Display
94

µµ
ÛÝ
You can select f rom three possible
settings f or auto door lock:
SHIFT FROM P
The doors lock whenever you move
the shift lever out of Park.
WITH VEH SPD
The doors lock when the vehicle
speed reaches about 10 mph (about
15 km/h).
CONT INUED
Auto Door Lock
Multi-Inf ormation Display
Inst rument s and Cont rols
95
Press the or button.
Press the SEL/RESET button.