keyless entry Acura RL 2005 Owner's Manual
[x] Cancel search | Manufacturer: ACURA, Model Year: 2005, Model line: RL, Model: Acura RL 2005Pages: 394, PDF Size: 5.2 MB
Page 82 of 394
Û
Ý
ÛÝ
Each time you press the INFO ( / ) button, the display changes as
shown in the illustration. Select
which of these customize groups you
want to change:
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE ENTRY screen is
shown again. WIPER SET UP DOOR/WINDOW SET UP
LIGHTING SET UP
KEYLESS ACCESS SET UP
POSITION SET UP
METER SET UP
With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Multi-Inf ormation Display
Selecting a Customize Group
Inst rument s and Cont rols
81
Press the or button.
Press the SEL/RESET button. TO METER
SET UP
seepage82
TO POSITION
SET UP
seepage85
TO KEYLESS
ACCESS SET UP
seepage88
TO LIGHTING
SET UP
seepage91
TO DOOR/
WINDOW SET UP
seepage94
TO WIPER
SET UP
seepage99
Page 89 of 394
Û
Ý
ÛÝ
Each time you press the INFO ( / ) button, the display changes as
shown in the illustration.
Here are the settings you can
customize in this mode: DOOR UNLOCK MODE
KEYLESS ACCESS
LIGHT FLASH
KEYLESS ACCESS BEEP
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again. With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Select KEYLESS ACCESS SETUP,
and press the SEL/RESET button.
Multi-Inf ormation Display
K EYL ESS A CCESS Setup
88
Press the or button.
Press the SEL/RESET button.
Page 90 of 394
ÛÝ
Door Unlock ModeKeyless Access Light FlashThe conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
You can select whether the driver’s
door unlocks or all the doors unlock
when you unlock the doors by
grabbing the driver’s door handle
while carrying the remote.
Select the desired mode by pressing
the or button, and enter your
selection by pressing the SEL/
RESET button. When you unlock the doors by
grabbing the driver’s door handle
while carrying the remote, some
exterior lights will blink twice.
When you lock the doors touching
the door lock sensor while carrying
the remote, some exterior lights will
blink once.
You can turn this feature on or off.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
89
Page 91 of 394
Û
Ý
Û
Ý Select ON or OFF by pressing the
or button, and enter your
selection by pressing the SEL/
RESET button.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
Select ON or OFF by pressing the
or button, and enter your
selection by pressing the SEL/
RESET button.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button. The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
If you unlock the doors by grabbing
the driver’s door handle while
carrying the remote, the beeper
sounds twice. When you lock the
doors, the beeper sounds once.
You can turn this feature on or off.The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.Keyless Access Beep
Multi-Inf ormation Display
90
Page 95 of 394
Û
Ý
With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button. Select DOOR/WINDOW SET UP,
and press the SEL/RESET button.
Each time you press the INFO ( /
) button, the display changes as
shown in the illustration.
Here are the settings you can
customize in this mode:
DOOR LOCK MODE AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEYLESS LOCK
ACKNOWLEDGEMENT
SECURITY RELOCK TIMER If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again.
Door/Window Setup
Multi-Inf ormation Display
94
Page 98 of 394
ÛÝ
Keyless Lock Acknowledgment
Door Lock Mode
If you unlock the doors by pressing
the button on the remote, you can
select whether the driver’s door
unlocks or all the doors unlock.
Select the desired mode by pressing
the or button, and enter your
selection by pressing the SEL/
RESET button.
The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns. To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
When you press the LOCK button
on the remote a second time within 5
seconds after you lock the doors, the
hood, and the trunk with the remote,
a beeper will sound and the exterior
lights will blink once to verif y that
the doors are locked and the security
system is ready.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
97