ECO mode Acura RL 2008 Service Manual

To achieve optimum voice
recognition, the f ollowing guidelines
should be f ollowed:Make sure the correct screen
is displayed f or the voice command
that you are using. See Voice
Command Index on page . Close the windows and the
moonroof .
The f an speed will be
automatically adjusted to low.
If the system cannot recognize
your command because of
background noise, speak louder.
If the microphone picks up voices
other than yours, the system may
not interpret your voice
commands correctly.
If you speak a command with
something in your mouth, or your
voice is either too high or too
husky, the system may
misinterpret your voice commands.
If you are still having trouble with
the voice control system, ref er to
on the
main menu screen.
Make sure the airf low f rom the
A/C vents does not interf ere with
the system microphone in the
ceiling console. Place your hand
over the microphone; if you f eel
any airf low, adjust the vents.
After pressing the button,
wait f or the beep, then give a voice
command.
Give a voice command in a clear,
natural speaking voice without
pausing between words.
268
Improving Voice Recognition
Voice Command Help
Talk
Compass System (U.S. model without navigation system)
Features
267
NOTE:
\f—\f—
y\fy
(\fy\fy
2008 RL

ÌÌÌ
ÌÌ
Ì
Ì
̵
ÎÎ Î
Temperature Commands
Temperature degreesTemperature upTemperature downTemperature max hotTemperature max cold
Temperature balanceTemperature dual mode onTemperature dual mode of fTemperature dual modeDrive temperature degrees
Passenger temperature degreesDrive vent temperature adjustmentPassenger vent temperatureadjustmentVent temperature upVent temperature downVent temperature maxVent temperature minimumVent temperature normal
Climate control f resh air
Climate control recirculateClimate control ventClimate control bi-level
Climate control f loorClimate control f loor and def rostFan speed upFan speed downFan speed
The system accepts these
commands on most screens.
Repeating these commands
switches (toggles) the f unction
between On and Of f . (:57to
87 degrees F)
(displays HI)(displays
LO)
(:57
to 87 degrees F)
( : 57 to 87 degrees F) Repeating these commands
switches (toggles) the f unction
between On and Of f .
The commands f or vent
temperature settings are available on
theclimatecontrolscreen.
(vent and
f loor)
( : 1 7) (f or best
voice control, keep f an speed at 1 or
2)
CONT INUED
Compass System (U.S. model without navigation system)
Features
269
NOTE:
\f—\f—
y\fy
(\fy\fy
2008 RL

The system accepts these
commands on the f irst setup screen.
(For the second and third setup
screens, simply say what is written
on the screen, and f ollow the voice
prompts)The system accepts over 100 on-
screen commands. The only
commands that must be chosen by
the interf ace dial are listed below.
Brightness up
Brightness downBrightness minimum/min.Brightness maximum/max.Contrast upContrast downContrast minimum/minContrast maximum/maxBlack level upBlack level downBlack level minimum/minBlack level maximum/maxVolume upVolume downVolume minimum/min.Volume maximum/max.Volume Of fInterf ace Dial f eedback of fInterf ace Dial f eedback auto Interf ace Dial f eedback on
NextPreviousReturnOKDelete
Set up Screen Commands
On-Screen Commands
Compass System (U.S. model without navigation system)
Features
273
\f—\f—
y\fy
(\fy\fy
2008 RL

Cruise control allows you to maintain
asetspeedabove25mph(40km/h)
without keeping your f oot on the
accelerator pedal. It should be used
f or cruising on straight, open
highways. It is not recommended f or
city driving, winding roads, slippery
roads, heavy rain, or bad weather.Push in the CRUISE button or the
ACC button (models with adaptive
cruise control) on the steering
wheel. The CRUISE MAIN or
green ACC indicator (models with
ACC) indicator on the instrument
panel comes on.
To switch f rom ACC to cruise
control, press the distance buttonon the steering wheel, and hold it
f or 1 second (see page ).
Accelerate to the desired cruising
speedabove25mph(40km/h).
Press and release the SET/
DECELbuttononthesteering
wheel. The CRUISE CONTROL
icon appears on the multi-
inf ormation display to show the
system is now activated.
When cruise control is on while
driving, the SH-AWD torque
distribution monitor and the tire
pressure monitor are not shown
on the multi-information display.
1. 2.
3.
294
CONT INUED
On models with adaptive cruise
control
Using Cruise Control
Cruise Control
Features
277
RES/
ACCEL
BUTTON
CRUISE (ACC) BUTTON
SET/
DECEL
BUTTON
Non-ACC model is shown
Improper use of the cruise
control can lead to a crash.
Use the cruise control only
when traveling on open
highways in good weather.
\f—\f—
y\f\fy
(\fy\fy
2008 RL

To switch f rom ACC to cruise
control, press the distance button on
the steering wheel, and hold it f or 1
second.Always be aware which mode is
selected.
When the cruise control is selected,
ACC does not sound a beeper or
display a message on the multi-
inf ormation display. Make sure to
keepasafedistancefromthevehicle
ahead of you.
When you press the button, you will
see CRUISE MODE SELECTED on
the multi-information display for 2
seconds.ToswitchbacktoACC,
press and hold the distance button
again for 1 second.
Switching to Cruise Control
A daptive Cruise Control (A CC)
294
DISTANCE BUTTON
Press the distance button.
\f—\f—
y\f\f\fy
(\fy\fy
2008 RL

Bluetoothis a registered trademark
of Bluetooth SIG, Inc.
Bluetooth is the wireless technology
that links your phone to the HFL.
TheHFLusesaClass2Bluetooth,
which means the maximum range
between your phone and vehicle is
30 f eet (10 meters).
Here are the main features of the
HFL. Instructions f or using the HFL
begin on page .
HFL recognizes simple voice
commands, such as phone numbers
and names. It uses these commands
to automatically dial, receive, and
store numbers. For more
inf ormation on voice control, see
UsingVoiceControlonpage .
Your vehicle is equipped with the
Bluetooth
HandsFreeLink(HFL).
HFL uses Bluetooth
technology as
a wireless link between it and your
Bluetooth
compatible cellphone.
When you are in your vehicle and
your phone is linked to the HFL,
you’ll enjoy hands-f ree phone use.
The HFL is available in both English
and French (Canadian models only).
To change the language, see page . To use the HFL, your phone must
have approved Bluetooth capability
along with the Hands Free Prof ile.
This type of phone is available
through many phone makers and
cellular carriers. You can also find an
approved phone by visiting
(In
Canada, visit ) or by
calling the Hands Free Link
client
support at
309
311
324
As required by the FCC:
This device complies with Part 15 of theFCC rules. Operation is subject to thef ollowing two conditions: (1) This devicemay not cause harmf ul interf erence, and(2) this device must accept anyinterf erence received, includinginterf erence that may cause undesiredoperation.
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
This device complies with IndustryCanada Standard RSS-210.Operation is subject to the f ollowing twoconditions: (1) this device may not causeinterf erence, and (2) this device mustaccept any interf erence that may causeundesired operation of the device. www.acura.com/handsfree
link
www.acura.ca.
(888) 528-7876.BluetoothWireless Technology
BluetoothHandsFreeL ink
Voice Control
A curaL ink, BluetoothHandsFreeL ink
308
\f—\f—
y

y
(\fy\f
y
2008 RL

»¼»
¼
Press and release the Talk button.
Af ter the beep, say ‘‘Change
language.’’ The HFL response is
‘‘English or French?’’
Press and release the Talk button.
Af ter the beep, say ‘‘Français.’’
The HFL response is ‘‘Vous avez
sélectionné Français. Les noms
enregistrés en mode Anglais ne
seront pas accessible en mode
Français. Voulez-vous continuer?
Press and release the Talk button.
Af ter the beep, say ‘‘Oui.’’ If there
are no paired phones without
French name tags, the HFL
response is ‘‘La langue a été
changée. Retour au menu principal.’’ If there are paired phones without
French name tags, the HFL
response is ‘‘Pour que le système
identif ie les téléphones qui ont été
jumelés dans une autre langue, les
noms des téléphones doivent être
ré-enregistrés.’’
If there are paired phones
without French name tags, the
f ollowing prompts will continue.
The HFL response is, f or example,
‘‘Quel est le nom Français pour Paul’s phone ?’’ Press and
release the Talk button. After the
beep, say ‘‘Téléphone de Paul.’’
The HFL response is, ‘‘Quel est le
nom Français pour Pat’s
phone ?’’ Press and release the
Talk button. Say ‘‘Téléphone de
Pat.’’ Af ter all paired phones
missing a French name tag are re-
recorded, the HFL will prompt,
‘‘Retour au menu principal.’’ Press and release the Talk button.
Af ter the beep, say ‘‘Changer
Langue.’’ The HFL response is,
‘‘Anglais ou Français?’’
Press and release the Talk button.
Af ter the beep, say ‘‘English.’’ The
HFL response is, ‘‘You have
selected English. Name tags that
were stored while in French mode
will not be accessible in English
mode. Would you like to
continue?’’
Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’ If there
are no paired phones without
English name tags, the HFL
response is ‘‘The language has
been changed. Returning to the
main menu.’’
1.
2.
3.
4.1.
2.
3.
To change f rom English to French, do
this: To change f rom French to English, do
this:
Changing L anguage
Canadian models only
BluetoothHandsFreeL ink
324
NOTE:
\f—\f—
y\fy
(\fy\fy
2008 RL

µµµ µ
µ µ
µ
Aggressive driving (hard
acceleration and braking)
Excessive idling, accelerating and
braking in stop-and-go traf f ic
Cold engine operation (engines
aremoreefficientwhenwarmed
up)
Driving with a heavy load or the
air conditioner running
Improperly inf lated tires
An under-inf lated tire increases
‘‘rolling resistance,’’ which reduces
f uel economy.
It puts a heavier
load on the engine, increasing f uel
consumption. In
particular, a build-up of snow or
mud on your vehicle’s underside
adds weight and rolling resistance.
Frequent cleaning helps your f uel
economy.
The f ollowing f actors can lower your
vehicle’s f uel economy:
A properly maintained vehicle
maximizes f uel economy. Poor
maintenance can signif icantly reduce
f uel economy. Always maintain your
vehicle according to the maintenance
messages displayed on the multi-
inf ormation display (see
on page ).
For example: Idling
results in 0 miles per gallon. If your vehicle has a
manual transmission, you can
boost your f uel economy by up
shif ting as early as possible.
Aerodynamic drag has a big ef f ect
on f uel mileage at speeds above 45
mph (75 km/h). Reduce your
speed and you reduce the drag.
Trailers, car top carriers, roof
racks and bike racks are also big
contributors to increased drag.
Rapid
acceleration, abrupt cornering,
and hard braking increase fuel
consumption.
394
Fuel Economy
Fuel Economy Factors Use the recommended viscosity motor oil, displaying the A PI
Certif ication Seal (see page
).
Maintain proper tire inf lation
A void carrying excess weight in
your vehicle
K eep your vehicle clean
Improving Fuel Economy
Owner’s
Maintenance Checks Avoid excessive idling
Always drive in the highest gear
possible
Observe the speed limit
Drive moderately 399
Drive Ef f icient ly
Vehicle Maint enance
Bef ore Driving
335
\f—\f—
y\fy
(\fy\f\fy
2008 RL

If theenginedoesnotstartwithin
15 seconds, or starts but stalls
right away, repeat step 4 with the
accelerator pedal pressed halfway
down. If the engine starts, release
pressure on the accelerator pedal
so the engine does not race.
If the engine fails to start, press
the accelerator pedal all the way
down, and hold it there while
starting to clear flooding. If the
engine still does not start, return
to step 5.
Apply the parking brake.
In cold weather, turn of f all
electrical accessories to reduce
the drain on the battery.
Make sure the shif t lever is in
Park. Press on the brake pedal.
Your vehicle’s starting system has an
auto control mode. When you turn
the ignition switch to the START
(III) position, this f eature keeps the
engine’s starter motor running until
the engine starts. Follow these
instructions to start the engine:
Without touching the accelerator
pedal, turn the ignition switch to
the START (III) position, then
release the ignition switch. You do
not need to hold the ignition
switch in the START (III) position
to start the engine. Depending on
the outside temperature, the
starter motor runs f or about 6 to 9 seconds until the engine starts.
If you hold the ignition switch in
the START (III) position f or more
than 7 seconds, the starter motor,
depending on the outside
temperature, runs f or about 10 to
25 seconds until the engine starts.
If the engine does not start, wait at
least 10 seconds bef ore trying
again.
1.
2.
3.
4. 5.
6.
150
Starting the Engine
Driving
347
The engine is harder to start in cold
weather. Also, the thinner air f ound at
altitudes above 8,000 f eet (2,400
meters) adds to this problem.
T he immobilizer system protects your
vehicle f rom thef t. If an improperly-
coded key (or other device) is used, the
engine’s f uel system is disabled. For
more inf ormation, see page .
——
y
y
(yy
2008 RL

If there is a problem with the
starting system, you will see a
‘‘CHECK STARTING SYSTEM’’
message on the multi-inf ormation
display when the ignition switch is
turned to the ON (II) position. You
will also see this message when the
auto control mode of the starting
system has a problem.If this message is on, the ignition
switchhastobeheldinthe
START (III) position manually
until the engine starts. The
ignitionswitchcanbeheldinthat
position up to 15 seconds.
Even though you may be able to
start the engine manually without
the auto control mode of the starting
system, have your dealer inspect
your vehicle.
Starting the Engine
Check Starting System Message
348
\f—\f—
y\f\fy
(\fy\fy
2008 RL