headlights Acura RLX HYBRID 2020 Owner's Manual
[x] Cancel search | Manufacturer: ACURA, Model Year: 2020, Model line: RLX HYBRID, Model: Acura RLX HYBRID 2020Pages: 609, PDF Size: 41.93 MB
Page 6 of 609

5
Quick Reference Guide❙Headlights/Turn Signals (P 155, 156)
❙Paddle Shifter (Shift down) (P 392)
❙Paddle Shifter (Shift up) (P 392)
❙Horn (Press an area around  .)
❙Voice Control Buttons (P 232)
❙Bluetooth® HandsFreeLink ® System 
Voice Control Buttons 
(P 324)
❙Brightness Control (P 166)
❙Adaptive Cruise Control (ACC) with Low 
Speed Follow Buttons 
(P 397, 402)
❙TRIP Button (P 115, 116)
❙Interval Button (P 397, 410)
❙Lane Keeping Assist System (LKAS) Button 
(P 397, 423)
❙Right Selector Wheel (P 114)
❙Heated Steering Wheel Button (P 194)
❙Head-Up Display Buttons (P 119)
❙Audio Remote Controls (P 215)
❙CAMERA Button* (P 479)
❙Wipers/Washers (P 163)
❙MAIN Button (P 397, 403, 423)
*  Not available on all models
20 ACURA RLX HYBRID-31TY36601.book  5 ページ  2019年7月23日 火曜日 午後6時25分 
Page 9 of 609

Visual Index
8
Quick Reference Guide❙Maintenance Under the Hood (P 501)
❙Windshield Wipers (P 163, 517)
❙Tires (P 520, 541)
❙Door Lock/Unlock Control (P 131)
❙Power Door Mirrors (P 173)
❙Headlights (P 156, 514)
❙How to Refuel (P 489)
❙High-Mount Brake Light (P 516)
❙Emergency Trunk Release Lever (P 145)
❙Opening/Closing the Trunk (P 143)
❙Multi-View Rear Camera* (P 476)
❙Rear Side Marker Lights (P 515)
❙Brake/Taillights (P 515)
❙Rear Turn Signal Lights (P 515)
❙Back-Up Lights (P 516)
❙Rear License Plate Lights (P 516)
❙Taillights (P 515)
❙Fog Lights* (P 159, 514)
❙Surround View Camera System* (P 478)
❙Trunk Release Button (P 144)
❙Side Turn Signal Lights (P 155, 515)
❙Front Turn Signal Lights (P 155, 156, 514)
❙Parking/Daytime Running Lights (P 159, 514)
❙Front Side Marker Lights (P 156, 515)
20 ACURA RLX HYBRID-31TY36601.book  8 ページ  2019年7月23日 火曜日 午後6時25分 
Page 88 of 609

87
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
High Beam 
Indicator•Comes on when the high beam 
headlights are on.——
Lights On 
Indicator
•Comes on whenever the light switch 
is on, or in  AUTO when the exterior 
lights are on.• If you set the power mode to ACCESSORY 
or VEHICLE OFF while th e exterior lights are 
on, a chime sounds when the driver’s door 
is opened.
—
Auto High-Beam 
Indicator
• Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.
• Comes on when all the operating 
conditions of the auto high-beam 
are met.
2 Auto High-Beam  P. 160—
Fog Light 
Indicator*
•Comes on when the fog lights are 
on.2 Fog Lights* P. 159—
Immobilizer 
System Indicator
•Comes on briefly when you set the 
power mode to ON, then goes off.
• Blinks if the immobilizer system 
cannot recognize the key 
information.•Blinks  - You cannot start the power 
system. Set the power mode to VEHICLE 
OFF, then select the ON mode again.
• Repeatedly blinks  - The system may be 
malfunctioning. Have  your vehicle checked 
by a dealer.
• Do not attempt to alter this system or add 
other devices to it. Electrical problems can 
occur.
—
* Not available on all models
20 ACURA RLX HYBRID-31TY36601.book  87 ページ  2019年7月23日 火曜日 午後6時25分 
Page 102 of 609

101
uuIndicators uMulti-Information Display Warning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
• Appears if there is a problem with the radiator system.•Drive slowly to prevent ov erheating and have your 
vehicle checked by a dealer as soon as possible.
• Appears when there is a pr oblem with the headlights.•Appears while driving  - The low beam headlights 
may not be on. When conditions allow you to drive 
safely, have your vehicle chec ked by a dealer as soon as 
possible.
• Appears if there is a problem with the parking sensor 
system.•Check if the area around the  sensor(s) is covered with 
mud, ice, snow, etc. If th e indicator(s) stays on even 
after you clean the area, have  the system checked by a 
dealer.
• Appears if the automatic brake hold is automatically 
canceled while it is in operation.•Immediately depress the brake pedal.
•Appears when the automatic brake hold system is 
turned off.
2 Automatic Brake Hold  P. 454
Models with 
parking sensor 
system
20 ACURA RLX HYBRID-31TY36601.book  101 ページ  2019年7月23日 火曜日 午後6時25分 
Page 103 of 609

102
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears when the automatic brake hold button is 
pressed without wearing the driver’s seat belt.•Fasten the driver’s seat belt.
2 Automatic Brake Hold P. 454
•Appears when the automatic brake hold button is 
pressed without depressing the brake pedal while the 
automatic brake hold  is in operation.•Press the automatic brake ho ld button with the brake 
pedal depressed.
2 Automatic Brake Hold P. 454
•Appears when the parking brake is applied 
automatically while it is in operation.
2 Automatic Brake Hold P. 454
2 Parking Brake  P. 450
•Appears if there is a problem  with the auto high-beam.•Manually operate the headlight switch.
• If you are driving with the  high-beam headlights when 
this happens, the headlights are changed to low beams.
• Appears when the area around the camera on the 
windshield is blocked by dirt, mud, etc.•Stop your vehicle in a safe pl ace, and wipe it off with a 
soft cloth.
• If the message does not disappear after cleaning the 
lens, have your vehicle checked by a dealer.
20 ACURA RLX HYBRID-31TY36601.book  102 ページ  2019年7月23日 火曜日 午後6時25分 
Page 157 of 609

156
uuOperating the Switches Around the Steering Wheel uLight Switches
Controls
Light Switches
Rotating the light switch turns the lights on 
and off, regardless of the power mode 
setting.
■High beams
Push the lever forward until you hear a click.
■Low beams
When in high beams, pull the lever back to 
return to low beams.
■Flashing the high beams
Pull the lever back, and release it.
■Lights off
Turn the lever to  OFF either when:
• The transmission is in 
(P.
• The parking brake is applied.
To turn the lights on again, turn the lever to 
OFF  to cancel the lights  off mode. Even if you 
do not cancel the lights off mode, the lights 
come on automatically when:
• The transmission is taken out of 
(P and the 
parking brake is released.
• The vehicle starts to move.
■Manual Operation1Light Switches
If you leave the power m ode in VEHICLE OFF while 
the lights are on, a chime sounds when the driver’s 
door is opened.
When the lights are on, the  lights on indicator in the 
instrument panel will be on.
2 Lights On Indicator  P. 87
Do not leave the lights on when the power system is 
off because it wi ll cause the 12-volt battery to 
discharge.
Your vehicle is equipped with the automatic 
headlight adjusting system that automatically adjusts 
the vertical angle of the  headlights. If you find a 
significant change in th e vertical angle of the 
headlights, there may be a problem with the system. 
Have your vehicle checked by a dealer.
High Beams
Flashing the high beams
Low Beams
Turns on parking, side marker, 
tail, and rear license plate lights
Turns on headlights, parking, side 
marker, tail, and rear license plate 
lights
20 ACURA RLX HYBRID-31TY36601.book  156 ページ  2019年7月23日 火曜日 午後6時25分 
Page 158 of 609

Continued157
uuOperating the Switches Around the Steering Wheel uLight Switches
Controls
Automatic lighting control can be used when 
the power mode is in ON.
When the light switch is in  AUTO, the 
headlights and other exterior lights will switch 
on and off automatically depending on the 
ambient brightness.
The headlights comes on when you unlock a 
door in dark areas with the headlight switch in 
AUTO .
u Once you lock the door, the headlights 
will go off.
■Automatic Operation (automatic lighting control)1Automatic Operation (aut omatic lighting control)
We recommend that you tu rn on the lights manually 
when driving at night, in a  dense fog, or in dark areas 
such as long tunnels or parking facilities.
The light sensor is in the location shown below.
Do not cover this light  sensor with anything; 
otherwise, the automatic lighting system may not 
work properly.
You can adjust the auto li ght sensitivity as follows:
2 Customized Features  P. 295
SettingThe exterior lights come on 
when the ambient light is at
Max
High
Mid
Low
Min
Light Sensor
Bright
Dark
20 ACURA RLX HYBRID-31TY36601.book  157 ページ  2019年7月23日 火曜日 午後6時25分 
Page 159 of 609

uuOperating the Switches Around the Steering Wheel uLight Switches
158
Controls
The headlights automatically co me on when the wipers are used several times within 
a certain intervals with  the headlight switch in  AUTO.
The headlights automatically go off a few  minutes later if the wipers are stopped.
The headlights, all other exterior lights, an d the instrument panel lights turn off 15 
seconds after you set the power mode to VE HICLE OFF, take the remote with you, 
and close the driver’s door.
If you set the power mode to VEHICLE OFF  with the headlight switch on, but do not 
open the door, the lights turn  off after 10 minutes (three minutes, if the switch is in 
the  AUTO  position).
The lights turn on again when you unlock or  open the driver’s door. If you unlock 
the door, but do not open it within 15 seconds, the lights go off. If you open the 
driver’s door, you will hear  a lights on reminder chime.
■Headlight Integration with Wipers*
■Automatic Lighting Off Feature
1Headlight Integration with Wipers*
This feature activates when the headlights are off in 
AUTO .
The instrument panel br ightness does not change 
when the headlights come on.
At dark ambient light leve ls, the automatic lighting 
control feature turns on the  headlights, regardless of 
the number of wiper sweeps.
1 Automatic Lighting Off Feature
 You can change the headli ght auto off timer setting.
2 Customized Features  P. 295
* Not available on all models
20 ACURA RLX HYBRID-31TY36601.book  158 ページ  2019年7月23日 火曜日 午後6時25分 
Page 160 of 609

159
uuOperating the Switches Around the Steering Wheel uFog Lights*
Controls
Fog Lights*
When the low beam headlights are on, turn 
the fog light switch on to use the fog lights.
Daytime Running Lights
The parking/daytime running lights come on when the following conditions have 
been met:
• The power mode is in ON.
• The headlight switch is  AUTO, or in  .
• The parking brake is released.
The lights remain on even if you set th e parking brake. Setting the power mode to 
VEHICLE OFF will turn off the daytime running lights.
The daytime running lights go off once the headlight switch is turned on, or when 
the headlight switch is in  AUTO and it is getting dark outside.
1Fog Lights*
The fog lights go off when the headlights turn off, or 
when the daytime running lights are on.
Fog Light Switch
* Not available on all models
20 ACURA RLX HYBRID-31TY36601.book  159 ページ  2019年7月23日 火曜日 午後6時25分 
Page 161 of 609

160
uuOperating the Switches Around the Steering Wheel uAuto High-Beam
Controls
Auto High-Beam
The front sensor camera detects the light  sources ahead of the vehicle such as the 
lights of a preceding or oncoming vehicle, or  street lights. When you are driving at 
night, the system automati cally switches the headlight s between low beam and high 
beam depending on the situation.
When all of the following conditions have been met, the auto high-beam indicator 
comes on and the auto high-beam is activated. •The power mode is in ON.
• The light switch is in  AUTO.
• The lever is in the low beam position.
• The headlights have  been automatically 
activated.
• It is dark outside the vehicle.
If the auto high-beam indicator does not come on even when all the conditions have 
been met, carry out the following procedure and the indicator will come on.
• Pull the lever toward you for flashing the  high beams then release it while driving.1Auto High-Beam
The auto high-beam system  does not always operate 
in every situation. This system is just for assisting the 
driver. Always observe your  surroundings and switch 
the headlights between high beam and low beam 
manually if necessary.
If you find the timing of beam changes inconvenient 
for driving, change the  headlight beams manually.
The range and the distance  at which the camera can 
recognize varies de pending on conditions 
surrounding your vehicle.
For the auto high-beam to work properly:
•Do not place an object that reflects light on the 
dashboard.
•Keep the windshield around the camera clean. 
When cleaning the windshield, be careful not to 
apply the windshield cleanser to the camera lens.
•Do not attach an object, sticker or film to the area 
around the camera.
•Do not touch the camera lens.
If the camera receives a st rong impact, or repairing of 
the area near the camera is  required, consult a dealer.
■How to Use the Auto High-Beam
Front Sensor Camera
Light Switch
Auto High-Beam 
Indicator
20 ACURA RLX HYBRID-31TY36601.book  160 ページ  2019年7月23日 火曜日 午後6時25分