headlight Acura TL 2002 3.2 User Guide

Acura TL 2002 3.2 User Guide TL 2002 Acura Acura https://www.carmanualsonline.info/img/32/11116/w960_11116-0.png Acura TL 2002 3.2 User Guide

Page 212 of 339

Acura TL 2002  3.2 User Guide This section also includes
Maintenance Schedules f or normal
driving and severe driving conditions,
a Maintenance Record, and instruc-
tions f or simple maintenance tasks
you may want to take care of

Page 224 of 339

Acura TL 2002  3.2 User Guide µµµ µ
µ
µ
µ
Youshouldcheckthefollowing
items at the specif ied intervals. If
you are unsure of how to perf orm
any check, turn to the page given.
Engine oil level Check every
time you fi

Page 236 of 339

Acura TL 2002  3.2 User Guide If necessary, f ill the reserve tank
to the MAX mark. Install the
reserve tank cap.
Install the radiator cap, and
tighten it fully. Start the engine and hold it at
1,500 rpm until the cooling f an
com

Page 260 of 339

Acura TL 2002  3.2 User Guide Check the operation of your car’s
exterior lights at least once a month.
A burned out bulb can create an
unsaf e condition by reducing your
car’s visibility and the ability to
signal your intentio

Page 261 of 339

Acura TL 2002  3.2 User Guide Check the f ollowing:Headlights (low and high beam)
Fog lights
Parking lights
Taillights
Brake lights
Turn signals
Back-up lights
Hazard light f unction
License plate light
Side marker lights
High-mou

Page 262 of 339

Acura TL 2002  3.2 User Guide The low beam headlight bulbs are a
type of high voltage discharge tube.
High voltage can remain in the
circuit even with the light switch of f
and the key removed. Because of
this, you should not atte

Page 263 of 339

Acura TL 2002  3.2 User Guide Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights

Page 264 of 339

Acura TL 2002  3.2 User Guide Remove the burned out bulb f rom
thesocketbypushingitinand
turning counterclockwise until it
unlocks.
Install the new bulb in the socket.
Turn it clockwise to lock it in place.
Insert the socket back

Page 288 of 339

Acura TL 2002  3.2 User Guide When you turn the ignition switch to
START (III), you do not hear the
normal noise of the engine trying to
start. You may hear a clicking sound
or series of clicks, or nothing at all.
Check these thin

Page 301 of 339

Acura TL 2002  3.2 User Guide Turn the ignition switch to LOCK
(0). Make sure the headlights and
all other accessories are off.
Remove the cover f rom the f use
box.Check each of the large f uses in
the under-hood f use box by
loo
Page:   < prev 1-10 11-20 21-30 next >