remote control Acura TL 2002 3.2 Owner's Manual

This section gives inf ormation about
the controls and displays that
contribute to the daily operation of
your Acura. All the essential controls
are within easy reach............................
Control Locations .56
...............................
Indicator Lights .57
.............................................
Gauges .64
...............................
Speedometer .64
.................................
Tachometer .64
.....................................
Odometer .65
...................................
Trip Meter .65
Outside Temperature ...................................
Indicator .66
...................
Temperature Gauge . 66
..................................
Fuel Gauge .66
Maintenance Required ...................................
Indicator .67
Controls Near the Steering .......................................
Wheel .68
...................................
Headlights .69 ...................................
Fog Lights .70
Automatic Lighting Off .....................................
Feature .70
............
Daytime Running Lights . 70
....
Instrument Panel Brightness . 71
................................
Turn Signals .71
.....................
Windshield Wipers .72
..................
Windshield Washers . 73
..........................
Hazard Warning .73
.............
Rear Window Def ogger . 74
......
Steering Wheel Adjustment . 75
...............................
Keys and Locks .76
..............................................
Keys .76
....................
Immobilizer System . 77
............................
Ignition Switch .78
......................
Power Door Locks .79
...................
Remote Transmitter . 81
..............
Childproof Door Locks . 84
...........................................
Trunk .85
........
Emergency Trunk Opener . 86
....................................
Glove Box .87
............................
Seat Adjustments .88
Driver’s Seat Full Power ............................
Adjustments .88
...........
Driver’s Lumbar Support . 90Front Passenger’s Seat
............................
Adjustments .90
..........................
Head Restraints .91
........................................
Armrest .92
.............................................
Mirrors .94
....
Adjusting the Power Mirrors . 94
Driving Position Memory ..........................................
System .96
....................................
Seat Heaters .99
............................
Power Windows .100
.......................................
Moonroof .103
...............................
Parking Brake .104
..................................
Digital Clock .105
.................
Console Compartment . 106
........................................
Coin Box .106
Armrest Storage ..........................
Compartments .107
...........................
Beverage Holder .108
........................................
Sun Visor .109
................................
Vanity Mirror .109
........................
Sunglasses Holder .110
............
Accessory Power Sockets . 110
...............................
Interior Lights .111
..................................
Storage Tray .112
Instruments and Controls
Inst rument s and Cont rols55
00/12/25 14:02:33 31S0K630_058

Turn the ignition switch ON (II).
You cannot add a new driving
position in the memory unless the
ignition switch is ON (II). You can
recall a memorized position with
the ignition switch in any position.
Store a driving position as explained
in this section only when the car is
parked.
Your Acura has a memory f eature
f or the driver’s seat and outside
mirror positions.
Two seat and outside mirror
positions, f or dif f erent drivers or
drivingconditions,canbestoredin
separate memories. You select a
memorized position by pushing the
appropriate button or using the
appropriate remote transmitter
(Memory1orMemory2).
Adjust the seat to a comfortable
position (see page ).
Adjust the outside mirrors f or best
visibility (see page ).Press and release the MEMO
buttononthecontrolpanel.You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator light in the
memory button will come on. The
current positions of the driver’s
seat and outside mirrors are now
stored.
3.
1.
2.
88
94
St oring a Driving Posit ion in Memory
Driving Posit ion Memory Syst em
Inst rument s and Cont rols96
M M E
EM
M O
O B
BUUT TT
TO
ON N
00/12/25 14:09:46 31S0K630_099

...............
Climate Control System . 116
.......
Fully-automatic Operation . 118
.......
Semi-automatic Operation . 119
.......
Fully-automatic Operation . 123
.......
Semi-automatic Operation . 124
Sunlight Sensor/ ............
Temperature Sensor . 128
................................
Audio System .129
.................
Operating the Radio . 130
.................
Adjusting the Sound . 134
............
Audio System Lighting . 135
....................
Radio Frequencies . 135
........................
Radio Reception .135
Operating the Cassette .....................................
Player .137
............
Tape Search Functions . 138
Caring f or the Cassette .....................................
Player .141
.....
Operating the CD Changer . 142
.......
Protecting Compact Discs . 148
CD Changer Error .............................
Indications .149
...........
Remote Audio Controls . 150
.......................
Thef t Protection .151 ............................
Security System .152
...............................
Cruise Control .153
Homelink Universal ................................
Transceiver .157
3.2 TL without Navigation System
3.2 TL with Navigation System
Comf ort and Convenience Features
Comf ort and Convenience Feat ures115
00/12/25 14:12:31 31S0K630_118

ÛÝ
The top and bottom buttons adjust
thevolumeup( )ordown( ).
Press the proper button and hold it
until the desired volume is reached,
then release it.
The AUDIO/CH button has three
f unctions, depending on whether you
are listening to the radio, or playing a
cassette or CD.
If you are listening to the radio, use
the AUDIO/CH button to change
stations. Each time you press this
button, the system advances to the
next preset station on the band you
are listening to. You will see the
number of the selected Preset button
in the display. To change bands,
press the AM or FM button on the
audio system’s f ront panel. If you are playing a cassette, use the
AUDIO/CH button to advance to the
next selection. You will see ‘‘FF’’
blinking in the display when you
press the AUDIO/CH button. The
system f ast f orwards until it senses a
silent period, then goes back to
PLAY.
If youareplayingaCD,thesystem
skips to the beginning of the next
track each time you push the
AUDIO/CH button. You will see the
disc and track number in the display.
Two controls f or the audio system
are mounted in the steering wheel
hub. These let you control basic
f unctions without removing your
hand f rom the wheel. Remote Audio Controls
Audio System
Comf ort and Convenience Feat ures150
A A U
UD DI
IOO/ /C
CH H
B
BU UT TT
TO
ON N
00/12/25 14:18:02 31S0K630_153

The HomeLink Universal
Transceiver built into your car can
be programmed to operate remotely-
controlled devices around your home,
such as garage doors, lighting, or
home security systems. It can
replaceuptothreeremote
transmitters.
If you have problems with training
the HomeLink Universal Transceiver,
or would like inf ormation on home
products that can be operated by the
transmitter, call (800) 355-3515. On
the Internet, go to www.homelink.
com.Always ref er to the operating
instructions and saf ety inf ormation
that came with your garage door
opener or other equipment you
intend to operate with the HomeLink
Universal Transceiver. If you do not
have this inf ormation, you should
contact the manuf acturer of the
equipment.
While training or using HomeLink,
make sure you have a clear view of
the garage door or gate, and that no
one will be injured by its movement.
If you are training HomeLink to
operate a garage door or gate, it is
recommended that you unplug the
motor f or that device during training.
Repeatedly pressing the remote
control button could burn out the
motor.HomeLink stores the code in a
permanent memory. There should
be no need to retrain HomeLink if
your car’s battery goes dead or is
disconnected.
If your garage door opener was
manuf actured bef ore April 1982, you
may not be able to program
HomeLink to operate it. Garage door
openers manuf actured bef ore that
date do not have a safety feature that
causes them to stop and reverse if an
obstacle is detected during closing,
increasing the risk of injury. If you
have questions, call (800) 355-3515.
HomeL ink Universal T ransceiver
Comf ort and Convenience Feat ures
Customer Assistance
Important Saf ety Precautions
General Inf ormation
157
00/12/25 14:19:11 31S0K630_160

µ
If you are training the second or
third buttons, go directly to Step 1. Unplug the garage door opener
motor f rom the house current.
Bef ore you can use HomeLink to
operate devices around your home, it
must ‘‘learn’’ the proper codes. For
example, to train HomeLink to open
and close the garage door:
If you just took
delivery of your vehicle and have not
trained any of the buttons in
HomeLink bef ore, you should erase
any previously learned codes bef ore
training the f irst button. To do this,
press and hold the two outside
buttons on the HomeLink
transceiver for about 20 seconds,
until the red light f lashes. Release
the buttons, then proceed to Step 1.
Holdtheendof thegaragedoor
opener remote control 2 to 5
inches f rom HomeLink. Make
sure you are not blocking your
view of the red light in HomeLink. Select the HomeLink button you
want to train.
Press the button on the remote
control and the button on
HomeLink at the same time. Hold
down both buttons.
2. 3.
4.
1.
HomeL ink Universal T ransceiver
Comf ort and Convenience Feat ures
T raining HomeL inkBef ore you begin
158
00/12/25 14:19:21 31S0K630_161

CONT INUED
Canadian Owners:
The remote control you are training
from may stop transmitting after two
seconds. This is not long enough f or
HomeLink to learn the code. Release
and press the button on the remote
control every two seconds until
HomeLink has learned the code.For security purposes, newer garage
door opening systems use a ‘‘rolling’’
or variable code. Inf ormation f rom
the remote control and the garage
door opener are needed bef ore
HomeLink can operate the garage
door opener.
The‘‘Training HomeLink’’ procedure
trains HomeLink to the proper
garage door opener code. The
f ollowing procedure synchronizes
HomeLink to the garage door opener
so they send and receive the correct
codes.
The red light in HomeLink should
begin f lashing. It will f lash slowly
at first, then rapidly.
When the red light f lashes rapidly,
release both buttons. HomeLink
should have learned the code from
the remote control.
Plug in the garage door opener
motor, then test the HomeLink
transceiver button by pushing it. It
should operate the garage door.
If the button does not work, repeat
this procedure to train it again. If it
still does not work, you may have a variable or rolling code garage
door opener. Test this by pressing
and holding the HomeLink
transceiver button you just trained.
If the red light blinks f or two
seconds,thenstayson,youhavea
rolling code garage door opener.
You may be able to verify this with
the manufacturer’s documentation.
Go to ‘‘Training With a Rolling
Code System.’’
Repeat these steps to train the
other two HomeLink buttons to
operate any other remotely-
controlled devices around your
home (lighting, automatic gate,
security system, etc.).
5.
6.
8.
7. T raining With a Rolling Code
System
HomeL ink Universal T ransceiver
Comf ort and Convenience Feat ures159
00/12/25 14:19:32 31S0K630_162

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thef ollowing two conditions: (1) This devicemay not cause harmf ul interf erence, and(2) this device must accept anyinterf erence received, includinginterf erence that may cause undesiredoperation.
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
This device complies with IndustryCanada Standard RSS-210.Operation is subject to the f ollowing twoconditions: (1) this device may not causeinterf erence, and (2) this device mustaccept any interf erence that may causeundesired operation of the device.
Toerasethecodesstoredinallthree
buttons, press and hold the two
outside buttons until the red light
begins to f lash, then release the
buttons.
Youshoulderaseallthreecodes
bef ore selling the car.
Totrainanalreadyprogrammed
HomeLink button to operate a new
device:
Select the HomeLink button you
want to train.
Press and hold the HomeLink
button until the red light begins to
f lash slowly (approximately 20
seconds).
While continuing to hold the
HomeLink button, place the
remotecontrolforthedevice2to
5inchesfromHomeLink. Release both buttons. HomeLink
should now be trained to operate
the device.
Press and hold the button on the
remote control. Hold both buttons
until the red light begins to f lash
rapidly.
1.
2.
3.
4. 5.
Retraining a Button
Erasing Codes
HomeL ink Universal T ransceiver
Comf ort and Convenience Feat ures161
00/12/25 14:19:56 31S0K630_164

Î..................................
Saf ety Belts . 8, 44
.........
Safety Defects, Reporting . 323
.................................
Saf ety Features .7
...........................................
Airbags .9
..................................
Door Locks .10
..........................
Head Restraints .10
.......................................
Seat Belts .8
.....................
Seats & Seat-Backs .10
.............
Saf ety Labels, Location of . 54
...............................
Saf ety Messages . ii
.....................................
Seat Belts .8, 44
...............
Additional Information . 44
.....................................
Cleaning .273
................
Lap/Shoulder Belt . 15, 44
................................
Maintenance .46
Reminder Light and ................................
Beeper .44, 59
..............................
Paint Touch-up .271
..............
Panel Brightness Control . 71
........................
Park Gear Position .182
...........................................
Parking .189
...............................
Parking Brake .104
Parking Brake and Brake System ...............................
Indicator .59, 295
.................................
Parking Lights .69
..
Parking Over Things that Burn . 189
.............................
PGM-FI System .315
..................
Polishing and Waxing . 271
............
Pre-Drive Saf ety Checklist . 11
.........
Pregnancy, Using Seat Belts . 19
............................
Protecting Adults .12
...
Additional Safety Precautions . 20
.....
Advice f or Pregnant Women . 19
........................
Protecting Children .21
.......................
Protecting Inf ants .30
.......
Protecting Larger Children . 37
.........
Protecting Small Children . 34
Using Child Seats with .....................................
Tethers .41 ...................
Radiator Overheating . 289
Radio/Cassette/CD Sound ........................................
System .129
...................
Readiness Codes . 294, 317
..
Rear Lights, Bulb Replacement . 263
..........................
Rear Seat Armrest .92
............................
Rear View Mirror .94
.................
Rear Window Def ogger . 74
...............
Reclining the Seat Backs . 89
.............................
Reminder Lights .57
................
Remote Audio Controls . 150
.......................
Remote Transmitter .81
Replacement Inf ormation .................
Air Cleaner Element . 238
.............
Air Conditioning Filter . 249
..........................
Engine Coolant .230
................
Engine Oil and Filter . 225
..........................................
Fuses .298
................................
Light Bulbs .259
....................................
Schedule .214
................................
Spark Plugs .240
...........................................
Tires .254
.............................
Wiper Blades .246 Replacing Seat Belts Af ter a
............................................
Crash .46
...
Reserve Tank, Engine Coolant . 169
...............................
Restraint, Child .21
..................
Reverse Gear Position . 182
................................
Rotation, Tire .254
Index
PR
S
VI
00/12/25 14:47:47 31S0K630_335