remove seats Acura TL 2002 3.2 Owner's Manual

Af ter selecting a proper child seat,
and a good position to install the seat,
there are three main steps in
installing the seat:When you are not using a child seat,
either remove it and store it in a saf e
place, or make sure it is properly
secured. An unsecured child seat can
be thrown around the car during a
crash or sudden stop and injure
someone.Make sure the child is properly
strappedinthechildseat
according to the child seat maker’s
instructions. A child who is not
properly secured in a child seat
canbethrownoutof theseatina
crash and be seriously injured.
If the child seat is not secure, try
installing it in a dif f erent seating
position, or use a dif f erent style of
child seat that can be f irmly secured
in the desired seating position.
Af ter installing a child
seat, push and pull the seat
f orward and f rom side to side to
verif y that it is secure.
To provide security during normal
driving maneuvers as well as during
a collision, we recommend that
parents secure a child seat as f irmly
as possible.
However, a child seat does not need
to be ‘‘rock solid.’’ In some vehicles
or seating positions, it may be
dif f icult to install a child seat so that
it does not move at all. Some side-to-
side or back-and-f orth movement can
be expected and should not reduce
the child seat’s ef f ectiveness.
All child seats are
designed to be secured to the car
with the lap part of a lap/shoulder
belt. Some child seats can be
secured to the vehicle’s LATCH
anchorage system. A child whose
seat is not properly secured to the
car can be endangered in a crash.
See pages , and f or
instructions on how to properly
secure child seats in this car. 31 35 42
Inst alling a Child Seat
Storing a Child Seat
Secure the child in the child seat.
Make sure t he child seat is f irmly
secured.
Properly secure t he child seat t o the car.
1. 2.
3.
Protecting Children
Driver and Passenger Saf ety29
00/12/25 13:57:58 31S0K630_032

Forproperprotection,aninfantmust
ride in a reclined, or semi-reclined
position. To determine the proper
reclining angle, check with the baby’s
doctor or f ollow the seat maker’s
recommendations.
To achieve the desired reclining
angle, it may help to put a rolled up
towel under the toe of the child seat,
as shown.
To deactivate the locking
mechanism and remove a child seat,
unlatch the buckle, unroute the seat
belt, and let the belt f ully retract.
A child who can sit up without
support, and who f its within the child
seat maker’s weight and height
limits, should be restrained in a
f orward-f acing, upright child seat.
Of the different seats available, we
recommend those that have a f ive-
point harness system as shown.
CONT INUED
Protecting Children
Driver and Passenger Saf ety
Rear-Facing Child Seat Inst allat ionTips
Child Seat T ypeProtecting Small Children
33
00/12/25 13:58:42 31S0K630_036