phone Acura TL 2010 Navigation Manual

Getting Started
Navigation System27

System Function Diagram
This diagram shows the navigation
system features, starting at the center
and working outward in layers. The
navigation program starts at “Key
ON,” and then displays the globe
screen (blue). If OK is selected on the
Disclaimer screen, the functions in the
yellow segments of the diagram become
available in the SET UP and INFO
screens.
The items above the map screen show
various methods to begin driving to
your destination (orange). You are
provided with map/voice guidance,
routing cautions, and a direction list.
While driving to your destination, use
the voice control system as much as
possible to interact with the navigation,
audio, and climate control systems
(green).
INFO BUTTON
THE MAP SCREEN
REMINDERS (pg. 19)CALENDAR(MAP/VOICEGUIDANCE,ROUTINGCAUTIONS,DIRECTIONSLIST)
-DRIVINGTOYOURDESTINATION-
IOV :EC "PLEH"
)LLA(
(pg.85)
:ECIOV NOITAMROFNI"
"NEERCS
(pg.79)
:ECIOV ot( "UNEM" )etuor egnahc
(pg.73)
:ECIOV
F WOH
"G NOL RO RA
NITSED EHT OT "?NOITA

(pg.57)
VOICE:
"DISPLAY (OR SAVE)
CURRENT LOCA TION"
(pg.21):ECIOV
EMIT TAHW"
"?TI SI
(pg.158)IO
V: EC
"OIDUA"
(pg.162)IOV :EC ETAMILCPMET ,NAF
(pg.161)
RETNE
YAW STNIOP )
74
.gp(
WEIV
CIFFART (pg.25)
IOV :EC O MOOZ/NI MOOZ
"" TU

(pg. 159)IO
V: EC
"SNOCI YALPSID/EDIH"
(pg.159)CIFFART WEIV
(pg.25)
CALL (pg.79) INICIDENT LIST (pg.25) FORECAST
WARNING (pg.81)
READ (pg.78)
LIST (pg.85)
CONTRAST (pg.92)
BLACK LEVEL (pg.92)

VOLUME (pg.
93)PERSONAL
INFORMATION (pg.93)

INTERFACE
DIAL FEEDBACK (pg.93)
CLOCK ADJUSTMENT
(pg.110)
ROUTING GUIDA NCE
(pg.101)
BASIC (pg.100)

LIST (pg. 85) ENTER (pg. 86)
LIST (pg. 88) (pg. 88)MATH
VERSION (pg. 89)
DOWNLOAD
(pg. 89)
CALL (pg. 89)
SSERP
KO
CALENDAR
SCENIC
ROAD INFO
CALCULATORSYSTEM/DEVICEINFOMAP DATA
UPDATE
STATUS
ROADSIDE
ASSISTANCE/DNAB TCELES
YCNEUQERFECNALAB LOV
DC SNOITCNUFREHTO
DUA OISSENTHGIRB TUO/NI MOOZ


THEDISCLAIMERSCREEN(pg.18)
VOI CE: "FIND
NEARES T..."
AT M , E T C .
(pg. 58)A TCELES
ANITSED NOIT
HTIW
FRETNI LAID ECA
(pg. 45):ECIOV
"EMOH OG"
(pg. 49)
:ECIOVROF "UNEM"
RETNE NOITANITSED
NEERCS

(pg. 28)
EUNITNOC
EHT OT NOITANITSED
)E
MUSER(
TRATSER RETFA
(pg. 77)
GLOBESCREENKEY ONCELLULAR
PHONE
TRAFFICWEA THERMESSAGEVOICE INFO
BRIGHTNESS (pg.92 )
SET UP
(MAIN)
VOICECOMMANDSOFNINEERCSpg. 158)(DUApg. 162)( OI
RTNOC ETAMILC LO

pg. 161)(
COLOR (pg.113)ACULALINK (p g.120)LANGUAGE (pg.116)WALLPAPER (pg.116)RESET FACTORY DEFAULT (p g.118)CLEAR PERSONAL DATA (pg.119)TFC & WTHR STATUS (pg.120)VEHICLE
(pg.111)
SET UP
(OTHER)
CHECK (pg. 87)
For more information,
see the vehicle
Owner’s manual.
OID
UA
NOTTUB
(pg. 10)
(pg.79)
(pg.79)
INFO BUTTON
2010 TL

Entering a Destination
Navigation System29
Place Phone No. (See page 41 )
You can search for the destination by
inputting a place’s phone number.
Coordinate (See page 42 )
You can search for the destination by
inputting the latitude and longitude for
the destination.
Destination Lists (See page 43 )
You can edit and delete destinations and
waypoints that have been established,
and you can also view the map for the
entire route.
Intersection (see page 44 )
This selection allows you to enter the
names of two intersecting streets in
a city. This is useful if you know the
general location of your destination, but
not the exact address.
Map Input (See page 45 )
You can select a destination from the
MAP screen. By Address
After you select Address from the
MENU screen ( Dest. MENU 1), the
display changes to:
Tip:
• When entering an address by voice, it is more effi cient to say the city name
fi rst, then the street name.
• When entering an address by the Interface Dial , it is usually easier
to enter the street fi rst. A city or cities
that the street appears in will be
displayed. For your convenience, you
do not have to enter both city and
street. NOTE:
• If you fi nd that your city is not
listed, it may be part of a larger
metropolitan area. Try entering the
street fi rst.
• Prior to departure, you can set areas to avoid. The system then includes
them in its calculations for the
destination you have entered. See
Edit Avoid Area on page 106 .
Selecting the State or Province
The state you are in is displayed at
the top of the screen. If your desired
destination is in another state, select
CHANGE STATE by moving the
Interface Dial up.
The display then changes to the
Select a state screen. Use the voice
control system and say the name or
corresponding number of the state, or
rotate the Interface Dial knob to
select the state.
You can select either the Canada /AK
or USA tab by moving the Interface
Dial to the left or right. If you select
Canada /AK , Canada and Alaska
will be displayed. If you choose USA,
the American mainland, Hawaii, and
Puerto Rico will be displayed.
2010 TL

Entering a Destination
Navigation System37

By Place Category
After you select Place Category from
the MENU screen ( Dest. MENU 1),
the display changes to:
If you select a category from the list,
you can select even more detailed sub-
categories.
Let’s assume you want to fi nd a coffee
shop (restaurant) called “Bucks.”
• If you know the phone number of the coffee shop, select Place Phone
No. , then enter the 10-digit number
with area code. This is the quickest
way to fi nd it. See By Place Phone
Number on page 41 . • The second best method is to select
Place Category , then Restaurant,
then CAFÉ /COFFEE SHOP , and
then enter the keyword “Bucks.” The
list will include all restaurants that
have the letters “bucks” anywhere in
the name.
• You can try to enter “Bucks” using Place Name , but you may have
to search through a list that might
include Bucks Welding, Bucks
Surplus, etc.
NOTE:
• Prior to departure, you can set areas to avoid. The system then includes
them in its calculations for the
destination you have entered. See
Edit Avoid Area on page 106 .
• You can enter the desired destination using the voice control system. For
information on the available voice
commands, see Voice Command
Index on page 158 .
Subcategories
If you select a subcategory and move the
Interface Dial down, the subcategory
is stored to “ My Favorites .” A
maximum of 30 subcategories may be
stored.
Tip:
If you are not sure of the spelling of
a place, the best way to fi nd it is to
use the keyword search. Select Place
Category , choose a category and
subcategory from the menus, then
select Search by Keyword , and
enter the partial name.
2010 TL

Entering a Destination
Navigation System41

Sort by Zagat Rating
This item appears on the Select one
of the Following screen only when
“Restaurant” has been selected as the
category.
When you use this option, you can
search for restaurants using the Zagat
Ratings information.
Food, Décor, Service - When you
select Food, Décor , or Service , the
restaurant will be listed by rating value.
Cost - When you select Cost, the
restaurant will be listed by the average
cost of a meal (including drink and tip).
When you select a sorting method, the
list of restaurants will appear.
Copyright© 2008 Zagat Survey, LLC. All rights reserved.
You can see the survey for a listed item
by selecting the “Z” tab, or by saying
“Zagat list number X” (where X is the
number 1-3).
Once you select a restaurant, the system
then displays the Calculate route to
screen (see Driving to Your Destination
on page 51 ).
NOTE:
• Selecting this sorting method will show you Zagat’s highest-rated
restaurants by the options, and not
necessarily by distance from your
current location.
• For details on the ratings and symbols, say “Key to Zagat rating”
or select the “?” tab using the
Interface Dial .
By Place Phone Number
You can select a destination by phone
number. Only phone numbers saved
in the system are recognized. The
phone numbers of private residences
and numbers entered in your private
address book are not in the system. If
you select Place Phone No. on the
MENU screen ( Dest. MENU 2 ), the
display will switch to the Enter Phone
Number screen. Use the Interface
Dial to enter the phone number.
NOTE:
Prior to departure, you can set areas to
avoid. The system then includes them in
its calculations for the destination you
have entered. See Edit Avoid Area on
page 106 .
2010 TL

Entering a Destination
42 Navigation System
When you edit the phone number,
continue pushing in on Interface Dial
more than three seconds to display
the Edit Mode screen. You can move
the position of the cursor by rotating
Interface Dial knob . To return the
Enter phone number screen, move
Interface Dial down.
After entering the number, move the
Interface Dial down and select OK .
Multiple listings for the same phone
number may be shown.
NOTE:
All 10 digits must be entered.
Tip:
When using the voice control system,
the entry should be spoken as a
continuous string of numbers. For
example, the telephone number (310)
555-4000 should be spoken as “Three,
one, zero, fi ve, fi ve, fi ve, four, zero, zero,
zero.” By Coordinate
If you select Coordinate from the
MENU screen ( Dest. MENU 2 ),
the display will change to the Enter
Latitude screen. Use the Interface
Dial to input the latitude.
NOTE:
Latitude and longitude must be entered
up to the seconds’ value.
NOTE:
Prior to departure, you can set areas to
avoid. The system then includes them in
its calculations for the destination you
have entered. See Edit Avoid Area on
page 106 . After entering the latitude, move the
Interface Dial
down and select OK .
The display will change as indicated in
the following paragraph.
On the Enter Longitude screen,
use the Interface Dial to input the
longitude.
With the selection of Coordinate , it
is assumed that you are searching for
the destination within the area that is in
the closest proximity. The display will
change as indicated on the next page.
2010 TL

Driving to Your Destination
70 Navigation System

Viewing / Saving the Current
Location
Whenever you are on a map screen,
you can always obtain your current
location either by pushing in on the
Interface Dial , selecting Current
Location from Map Information , or
by using the voice control system and
saying “Display current location.” A
screen pops up which shows the address
of your current location, as well as the
latitude, longitude, and elevation.
NOTE:
The elevation will not appear when the
system is temporarily lacking proper
GPS information. The system elevation
may not agree with elevations shown
on roadside elevation signs, and may
fl uctuate plus or minus 100 feet or
more.
You can store the current location for
later use. It does not change or cancel
your current route.
For example, you are following
the system’s directions to get to a
destination. While sitting at a stoplight
you notice a store on the corner, but do
not have time to visit it right now.
You can save the location to select as a
destination at a later date. To save the location, say “Save current
location” or select Save on the
Current
location screen. The Edit address
book screen with the current location
data will appear. You can edit the name,
phone number, or category name to be
saved in your personal Address Book.
Select Return and you will be returned
to the Map Information screen.
You can then use Address Book from
the MENU screen ( Dest. MENU 1) to
select the saved location, and return to
the same spot.
2010 TL

Information Features
Navigation System79
The INFO function consists of two
main screens. To display the INFO
screen ( Main Info ), say “Information”
or press the INFO button. To change it
to the INFO screen ( Other), select the
“Other” tab. You can switch screens by
selecting the tab.
You can use the voice control system to
select any item on the INFO screen.
NOTE:
For information on the available voice
commands, see Voice Command Index
on page 158 . INFO Screen (Main Info)
When you say “Information” or press
the INFO button, the display changes to:
Move the Interface Dial to the left
and right to display Main Info or
Other .
Cellular Phone
The Cellular Phone option (available
on some phones) allows you to
import up to 1,000 names and 10,000
phone numbers to the phonebook of
Bluetooth ® HandsFreeLink® (HFL)
from your cellular phonebook.
Up to six phones can have their
phonebooks imported. With HFL, you
can then automatically dial any name or
number in the phonebook.
Say or select Cellular Phone from
the INFO screen ( Main Info ), and the
display changes to:
NOTE:
• For more information on this feature, see your vehicle Owner’s manual.
2010 TL

Information Features
80 Navigation System
• For questions about the HFL
Cellular Phonebook, call
HandsFreeLink customer support at
(888) 528-7876, or (888) 9-HONDA-
9 in Canada, or go to www.acura.
com/handsfreelink .
Messages
See A c u r a L i n k M e s s a g e s on page 78 .
Tr a ffi c Incidents
When you say or select Tr a f c
Incidents , you can view a list of the
traffi c incidents near your current
position or along your calculated route.
See Viewing Incident Reports o n p a ge 2 5
and Traffi c Rerouting on page 72 .
NOTE:
To receive traffi c information, your XM
traffi c /weather subscription must be
paid. See page 120 for details. If you select an incident from the list
and push in on the Interface Dial
, the
detailed information and the map of the
surrounding area will appear.
NOTE:
When information regarding Traffi c
Incidents cannot be received, this
feature cannot be selected. After
a period of 15 minutes, Tr a f c
Incidents may be selected but the
message “Traffi c information could not
be received” will be displayed. For an
explanation regarding the verifi cation
of reception status, please see Tra f fi c &
Weather Status on page 120 .

AcuraLink Weather
The Weather Info option allows you
to view the weather forecast, warning
list, warning map, and radar map.
When you say or select Weather
Information on the Map menu or
INFO screen, the following screen
appears:
NOTE:
• You can view the same screen by selecting Weather Info . from the
Map menu (see page 57 ) .
• To receive weather information, your XM traffi c /weather subscription must
be paid. See page 120
for details.
2010 TL

Information Features
Navigation System89

System / Device Information
Say or select System /Device
Information while on the INFO
screen (Other ), and the display will
change as indicated below.
You will need this information when
ordering an update DVD. See page 128 for
more information.
Map Update Status
During data updates, you can check
the update status for map data for each
state.
During the update of map data, say
or select Map Update Status while
on the INFO screen (Other), and the
display will change as indicated below.
NOTE:
• This operation can only be carried out during a disc update.
• You can check the data update status with the status bar that is displayed
on the screen.
• If you say “Question” or select the ? tab, you can refer to the Map Update
Status explanation.
Roadside Assistance
Acura Roadside Assistance is provided
as a service to Acura clients. When
paired with a Bluetooth-enabled
cell phone, the system can call for
assistance as long as the setting is
switched ON.
Say or select Roadside Assistance
while on the INFO screen (Other), and the
display will change as indicated below.
When you select the country, the phone
number for Roadside Assistance and
vehicle position information will be
displayed.
Say “Call” or select CALL with the
Interface Dial, and then select Ye s
from the confi rmation screen.
2010 TL

System Setup
Navigation System95
Edit Name
You may use the “Name” fi eld to give
the entry a name or title that you will
recognize later, such as “Doctor Smith”
or “Broadway Theatre.” If you do not
give the address a name, the system will
assign one (Address 001, etc.).
Say or select Edit Name . Then use the
Interface Dial to enter the name.
Select OK when fi nished.
NOTE:
You can always re-enter, edit, or make
changes to any entry. “Address” is the
only required fi eld. E d i t A d d r e s s
When you say or select Edit Address
,
the display changes to:
Current Position - Allows you to use
your current position as the address.
Address - Requires you to enter the
city and address you wish to store. The
operation is the same as selecting
Address from the MENU screen
( Dest. MENU 1 ). See page 28 .
Previous Destinations - Allows you
to choose one of the locations in the
Previous Destination list for your
Address Book list. This operation
is the same as selecting Previous
Destinations from the MENU screen
( Dest. MENU 1 ). See page 35 . Place Name
- Allows you to select one
of the Point of Interest (POI) locations
already stored in the system as one of
your personal addresses. This is the
same as selecting Place Name from
the MENU screen ( Dest. MENU 1).
See page 36 .
Place Category - Allows you to select
a point of interest (POI) that has been
saved in the system as one individual
address. This is the same as selecting
Place Category from the MENU
screen ( Dest. MENU 1 ). See page 37 .
Place Phone Number - This feature
is very convenient when you know the
phone number of a place or business
that you want to save. This is the same
as selecting Place Phone No. from
the MENU screen ( Dest. MENU 1).
See page 41 .
2010 TL