pairing phone Acura TL 2012 Advanced Technology Guide

24
M a k i n g a C a l l
Press and release the HFL Talk button before you give a command.
1. Say “Call” and the phone
number\b
2. Say “Call” or“Dial” to
begin the call. 3. The call is connected and
heard through the
speakers.
R e c e i v i n g a C a l l
Press and release the HFL Talk button before you give a command.
1. A notification is heard\b and “INCOMING CALL” and the
phone number appear on the
MID.
2. Press the HFL Talk button to
accept the call.
3. Press the HFL Back button
to decline or end the call.
B L \f E T O O T H® H A N D S F R E E L I N K ®( T e c h \b A d v a n c e )
Place and receive phone calls through your vehicle’s navigation and
audio systems. Visit www\bacura\bcom/handsfreelink to check if your phone
is compatible.
Press and release the Talk button before you give a command.
* You can also use the Interface Dial to complete this procedure\b
25
1. Press the PickUp button to
access the Phone screen. A
prompt appears. Say“Yes.”
PickUp button: Answer an
incoming call\b or go directly to the
Cellular Phone screen.
HangUp button: End a call or
decline an incoming call.
Talk button: Give HFL commands.
Back button: Cancel a command
and return to the previous screen.
P a i r i n g Y o u r P h o n e
1234567890
1
IN USE
C
CALLING
INCOMING CALL
1234567890
26 27
2. Make sure your phone is in
discovery mode\b and say“OK.”
3. HFL searches for your phone. Select it when it appears on the
list. Go to step 4. If your phone does not
appear:
Select
“Phone Not Found?”
and search for a
HandsFreeLink device from
your phone. \fonnectto
HFL. Go to step 4.
4. HFL gives you a fourdigit code. Enterit on your
phone when prompted.
Select OK to complete.
NOTE: To pair another phone to HFL (or if the prompts do not
appear)\b you must use the Phone Setup menu. See your Owner’s
Manual for pairing instructions.
12 TL ATG\fATG_NEW STYLE 1/27/2011 1\f34 PM Page 15