display Acura TL 2014 Service Manual

See page189
See page 188
See page 191
See page
200
See page 199
See page 188
See page 190
See page 191
See page 188
Multi-Inf ormation Display
Inst rument s and Cont rols
93
A/T model only
A/T model only
A/T model only
M/T model only
12/07/20 10:41:51 31TK4640_098

ÎÎ
Î
You can customize some vehicle
control settings. To change the
settings, the ignition switch must be
in the ON (II) position, and the
vehicle must be stopped with the
transmission in Park (automatic) or
with the parking brake set (manual). If you try to enter the customizing
mode while the vehicle is moving,
you will see a ‘‘MUST STOP AND
SHIFTTOPARKTOCHANGE
SETTINGS’’ (automatic) or ‘‘MUST
STOP AND SET PARK BRAKE TO
CHANGE SETTINGS’’ (manual)
message and you cannot change the
settings.
You can customize some vehicle
control settings f or ‘‘DRIVER 1’’ and
‘‘DRIVER 2’’ separately.
To have the driver’s ID detected,
make sure the driver’s door is
unlocked with a corresponding
remote transmitter/keyless access
remote.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0),
ACCESSORY Mode is the
equivalent of ACCESSORY (I),
and ON Mode is the equivalent
of ON (II). For more
information, see pages and
.
If you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, move the shif t lever out of
Park (automatic) or release the
parking brake (manual), the display
will change to the normal screen. :
187 184
Multi-Inf ormation Display
Customized Settings
94
12/07/20 10:41:58 31TK4640_099

ÛÝRef er to the table on the f ollowing
pages about the settings you want to
customize.
If you use the key to unlock the
driver’s door, the system cannot
recognize either ‘‘DRIVER 1’’ or
‘‘DRIVER 2.’’
To enter the customizing mode,
press either INFO button ( / )
repeatedly until ‘‘CUSTOMIZE
SETTINGS’’ is displayed, then press
the SEL/RESET button.
CONT INUED
On models without keyless accesssystem
Multi-Inf ormation Display
Inst rument s and Cont rols
95
DRIVER’S ID
Press the SEL/RESET
button.
U.S. model is shown.
12/07/20 10:42:03 31TK4640_100

ÎÎ
ÎÎ
Î Î
Î
Î
Î
Î
µ™¶ ™
µ™¶ ™
Î
Î LOW
MIN
OFF
MET ER SET UP
(P.101)
POSITION SETUP
(P.112) LANGUAGE SELECT ION
ADJUST OUTSIDE
TEMP. DISPLAY
TRIP A RESET
WITH REFUEL
ELAPSED TIME
RESET
ADJUST
ALARM VOLUME
AUTO INTERIOR
ILLUMINATION
KEYLESS START
GUIDANCE SCREENS
MEMORY POSIT ION LINK
Changes the language used in the display.
Changes the outside temperature reading above or
below its current reading.
Causes trip meter A and the average fuel economy
to reset when you refuel.
Resets the elapsed time of your current trip.
Changes the indicator alarm volumes into three
levels.
Changes the interior light sensitivity to your liking.
Changes the display of the keyless start guidance
screens.
Changes the driver’s seat and the outside mirror
positions to a stored setting. 103
104
105
106
108
109
110
113
ENGLISH
FRENCH
SPANISH
5°F 0°F 5°F
(U.S.) 3°C 0°C 3°C
(Canada)
ON
OFF
IGN OFF
TRIP A
TRIP B
HIGH
MID
LOW
MAX
HIGH
MID
ON
OFF
ON
OFF
1:
2: Default setting
Only on models with keyless access system
Group Setup
Menu Item Description Page
Setting Option
2 1
11
1 1
1
1
1
1
Multi-Inf ormation Display
96
12/07/20 10:42:13 31TK4640_101

ÎÎ
Î
Î
Î
Î
Î
Î
Î
Description
Menu Item
CONT INUED
Group Setup Page
Setting Option
Changes which doors unlock when you use the
remote or grab the driver’s door handle.
Causes some exterior lights to blink when you
unlock/lock the doors by grabbing or touching the
sensor/pushing the button on the driver’s door
handle.
Causes the beeper to sound when you unlock/lock
the doors by grabbing or touching the sensor/
pushing the button on the driver’s door handle.
Changes how long (in seconds) the interior lights
stay on after you close the doors.
Changes how long (in seconds) the exterior lights
stay on after you close the driver’s door.
Changes the timing of when the headlights come
on. The headlight switch needs to be in the AUTO
position.
DOOR UNLOCK MODE
KEYLESS ACCESS LIGHT
FLASH
KEYLESS ACCESS BEEP
INTERIOR LIGHT
DIMMING T IME
HEADLIGHT
AUTO OFF TIMER
AUTO LIGHT
SENSITIVITY
KEYLESS ACCESS
SETUP
(P.115)
LIGHTING SETUP
(P.120)
116
117
118
121
122
123
60 sec
0sec
LOW
MIN
DRIVER DOOR
ALL DOORS
ON
OFF
ON
OFF
15 sec
30 sec
60 sec
30 sec
15 sec
MAX
HIGH
MID
1:
2: Default setting
Only on models with keyless access system2 1
1
1
1
1
1
Multi-Inf ormation Display
Inst rument s and Cont rols
97
12/07/20 10:42:19 31TK4640_102

ÎÎ
Î
Î Î
Î
Î
Î
Description
Menu Item Page
Group Setup Setting Option
Changes when the doors automatically lock.
Changes when the doors automatically unlock.
Changes which doors unlock with the remote
transmitter/keyless access remote on the first
push.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also
sound when you press the LOCK button twice.
Changes how long it takes (in seconds) for the
doors to relock and the security system to set after
you unlock but do not open the door.
Set/Cancel all the customized settings as default.
AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE
UNLOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK
TIMER
127
128
130
131
133
134
DOOR SETUP
(P.125)
DEFAULT ALL
(P.134) OFF
WITH VEH SPD
SHIFT FROM P (A/T only)
OFF
DRIVER DOOR
With SHIFT to P (A/T only)
ALL DOORS With
SHIFT to P (A/T only)
DRIVER DOOR With IGN OFF
ALL DOORS With IGN OFF
DRIVER DOOR
ALL DOORS
ON
OFF
30 sec
60 sec
90 sec
CANCEL
SET
Default setting
1:
2:
3: Default setting for automatic transmission
Default setting for manual transmission1
2
1
1 1
Multi-Inf ormation Display
98
12/07/20 10:42:25 31TK4640_103

Û
Ý
ÛÝ
ÛÝ
Î
Î
You can customize some of the
vehicle control settings to your
pref erence. Here are the settings
you can customize:
METER SETUP Each time you press the INFO ( /
) button, the screen changes as
shownonthenextpage.Pressthe
INFO( / )buttonuntilyousee
the setup you want to customize,
then press the SEL/RESET button
to enter your selection.
If you do not make any changes,
select ‘‘EXIT.’’ The display returns to
the normal display.
LIGHTING SETUP
If you want the settings as they were
when the vehicle lef t the f actory,
select DEFAULT ALL, as described
on page .
POSITION SETUP
KEYLESS ACCESS SETUP
DOOR SETUP
When you want to change the
vehicle control settings, press the
INFO ( / ) button to select
CHANGE SETTINGS, then press
the SEL/RESET button.
: Only on models with keyless
access system
134
CONT INUED
Customize Settings
Multi-Inf ormation Display
Inst rument s and Cont rols
99
12/07/20 10:42:34 31TK4640_104

Î
ÎÛÝ
Multi-Inf ormation Display
100
METER SETUP
See page 101.
POSITION
SETUP
See page 112.KEYLESS
ACCESS SETUP
See page 115. LIGHTING
SETUP
See page 120.DOOR SETUP
See page 125.
DEFAULT ALL
See page 134.
: On models with keyless access
system only
: Press the SEL/RESET button.
: Press the INFO button ( / ).
12/07/20 10:42:39 31TK4640_105

Û
Ý
ÛÝ
LANGUAGE SELECTION
ADJUST OUTSIDE TEMP.
DISPLAY
ADJUST ALARM VOLUME
AUTO INTERIOR
ILLUMINATION
KEYLESS START GUIDANCE
SCREENS
Here are the selectable custom
settings for the meter setup:
TRIP A RESET WITH REFUEL
ELAPSED TIME RESET While ‘‘METER SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode. Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO( / )buttonuntilyousee
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
CONT INUED
On models with keyless access
system
Meter Setup
Multi-Inf ormation Display
Inst rument s and Cont rols
101
12/07/20 10:42:47 31TK4640_106

ÛÝ
Multi-Inf ormation Display
102
See page 109.
See page 103. See page 104. See page 105. See page 106. See page 108.
See page 110.
: Press the SEL/RESET button.
: Press the INFO button ( / ).On models with
keyless accesssystem only
12/07/20 10:42:51 31TK4640_107