lock Acura TSX 2010 User Guide

Af ter conf irming that the belt is
locked, grab the shoulder part of
the belt near the buckle, and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child seat will not be secure.Push and pull the child seat
f orward and f rom side-to-side to
verify that it is secure enough to
stay upright during normal driving
maneuvers. If the child seat is not
secure, unlatch the belt, allow it to
retract f ully, then repeat these
steps.
To remove slack, it may help to
putweightonthechildseat,or
push on the back of the seat while
pulling up on the belt. To deactivate the lockable retractor
andremoveachildseat,unlatchthe
buckle, unroute the seat belt, and let
the belt fully retract.
4. 5.
Installing a Child Seat
Driver and Passenger Saf ety
49
2010 TSX

This section gives inf ormation about
the controls and displays that
contribute to the daily operation of
your vehicle. All the essential
controls are within easy reach............................
Control Locations . 58............................
Instrument Panel .59
..........
Instrument Panel Indicators . 60
.............................................
Gauges .68
.............
Multi-Inf ormation Display . 70
Controls Near the Steering .........................................
Wheel .109
Windshield Wipers and .....................................
Washers .110
.......
Turn Signals and Headlights . 111
Automatic Lighting Off ...................................
Feature .113
.........
Daytime Running Lights . 114
.....................................
Fog Lights .115
......
Instrument Panel Brightness . 115
...............
Hazard Warning Button . 117
...............
Rear Window Def ogger . 117
......
Steering Wheel Adjustments . 118
.............................
Keys and Locks .119
......................
Immobilizer System .121
..............................
Ignition Switch .122
....................................
Door Locks .124
............
Childproof Door Locks . 125
.....................
Remote Transmitter .126
..............................................
Trunk .130
...................
Trunk Main Switch . 131
......
Emergency Trunk Opener . 132...............................................
Seats .134
..........
Power Seat Adjustments . 134
.........
Driver’s Lumbar Support . 135
........................
Head Restraints .135
.............
Folding the Rear Seats . 138
..................................
Seat Heaters .141
Driving Position Memory ........................................
System .142
...........................................
Mirrors .145
..
Adjusting the Power Mirrors . 145
..............
Power Mirror Heaters . 146
............................
Power Windows .147
.......................................
Moonroof .151
...............................
Parking Brake .153
.........
Interior Convenience Items . 154
.....................
Beverage Holders .155
........
Accessory Power Sockets . 156
.............
Console Compartment . 156
..................................
Glove Box .157
....................
Sunglasses Holder .158
..................................
Sun Visors .159
............................
Vanity Mirror .159
.........................
Driver’s Pocket .159
..........................
Center Pockets .160
..................................
Coat Hook .160
...............................
Interior Lights .161
Instruments and Controls
Inst rument s and Cont rols
57
2010 TSX

ÎÎ
Î
Î
Î
: If equipped
Control L ocations
58
HOOD RELEASE HANDLE
POWER WINDOW
SWITCHES
TRUNK RELEASE
BUTTON MULTI-INFORMATION DISPLAY
MOONROOF SWITCH
AUDIO SYSTEM
CLOCK ,COMPASS
HAZARD WARNING
BUTTON
ACCESSORY POWER
SOCKET
MANUAL TRANSMISSION
AUTOMATIC TRANSMISSION
MIRROR CONTROLS
Vehicle with navigation system is shown. CLIMATE CONTROL
SYSTEM
(P.145)
(P.142)
(P.124)
(P.147)
(P.130) ACCESSORY POWER
SOCKET(P.156) USB ADAPTER
CABLE
AUXILIARY
INPUT JACK (P.156)
(P.166)
(P.117)
(P.174)
(P.151)
(P.70)
POWER DOOR LOCK
MASTER SWITCH
(Unlocking Fuel Fill
Door)
DRIVING POSITION
MEMORY SYSTEM
BUTTONS
(P.350) (P.201,211,261,272) (P.
287 ) (P.373) (P.370) (P.289)
(P.294)
(P.301)
HOMELINK BUTTONS
2010 TSX

The U.S. instrument panel is shown. Dif f erences f or the Canadian models are noted in the text.
Instrument Panel
Inst rument s and Cont rols
59
FOG LIGHT INDICATOR
SECURITY SYSTEM
INDICATOR VEHICLE STABILITY ASSIST (VSA)
SYSTEM INDICATOR
ANTI-LOCK BRAKE SYSTEM (ABS)
INDICATOR
CHARGING SYSTEM
INDICATOR
ELECTRIC POWER
STEERING (EPS)
INDICATOR LIGHTS ON INDICATOR
MALFUNCTION INDICATOR
LAMP
LOW OIL PRESSURE
INDICATOR SEAT BELT REMINDER
INDICATOR
VEHICLE STABILITY ASSIST (VSA)
ACTIVATION INDICATOR
LOW FUEL INDICATORIMMOBILIZER SYSTEM
INDICATOR
SIDE AIRBAG OFF
INDICATOR
SYSTEM MESSAGE INDICATOR
HIGH BEAM INDICATOR
CRUISE CONTROL INDICATOR
DOOR/TRUNK OPEN
INDICATOR LOW TIRE PRESSURE/TPMS
INDICATOR
(P.63)
(P.66)
(P.62) (P.66)
(P.65) (P.67) (P.63)
(P.19,60) (P.65)
(P.67) (P.
61)(P.
62)
(P.62) SUPPLEMENTAL RESTRAINT
SYSTEM INDICATOR
(P.
67)
(P.66)
CRUISE MAIN INDICATOR (P.66)
PARKING BRAKE AND BRAKE SYSTEM
INDICATOR (P.66)
(P.60, 472)
(P .61, 471)
(P.60, 471)
(P.61,473) (P.64,
386)
2010 TSX

This indicator comes on brief ly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates that the
passenger’s side airbag has
automatically shut of f . You will also
see a ‘‘PASSENGER SIDE AIRBAG
OFF’’ message on the multi-
inf ormation display. For more
inf ormation, see page .
This indicator comes on brief ly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates a
potential problem with your f ront
airbags. This indicator will also alert
you to a potential problem with your
side airbags, passenger’s side airbag
cutof f system, side curtain airbags,
automatic seat belt tensioners,
driver’s seat position sensor, or the
f ront passenger’s weight sensors.
You will also see a ‘‘CHECK
AIRBAG SYSTEM’’ message on the
multi-inf ormation display. For more
inf ormation, see page .
This indicator normally comes on f or
a f ew seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position. If this indicator comes on at
any other time, there is a problem in
theABS.If thishappens,takethe
vehicle to your dealer to have it
checked. With this indicator on, your
vehicle still has normal braking
ability but no anti-lock f unction. You
will also see a ‘‘CHECK ABS
SYSTEM’’ message on the multi-
inf ormation display. For more
inf ormation, see page .
32
31
384
Instrument Panel Indicators
Side Airbag Of f
Indicator
Supplemental Restraint
System Indicator
Anti-lock Brake System
(A BS) Indicator
62
U.S. Canada
2010 TSX

This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either theor position. If you turn the
ignition switch to the ACCESSORY
(I) or the LOCK (0) position without
turning of f the light switch, this
indicator will remain on. A reminder
chime will also sound when you open
the driver’s door. This indicator comes on with the
high beam headlights. For more
inf ormation, see page .
This indicator also comes on with
reduced brightness when the
daytime running lights (DRL) are on
(see page ).
This indicator comes on when you
turn on the f og lights. For more
inf ormation, see page .This indicator comes on when you
turn on the cruise control system by
pressing the CRUISE button on the
steering wheel (see page ).
This indicator comes on when you
set the cruise control. See page
f or inf ormation on operating the
cruise control.
This indicator will also come on
when the light switch is in AUTO
and the lights turn on automatically. 115111
114 298
298
If equipped
All models except Canadian TSX with
4-cylinder engine
Instrument Panel Indicators
L ights On Indicator High Beam Indicator
Fog L ight Indicator Cruise Main Indicator
Cruise Control Indicator
66
2010 TSX

The multi-inf ormation display in the
instrument panel displays various
inf ormation and messages when the
ignition switch is in the ON (II)
position. Some of the messages help
you operate your vehicle more
comf ortably. Others help to keep
you aware of the periodic
maintenance your vehicle needs f or
continued trouble-f ree driving.
There are three types of messages:
normal display messages, engine oil
lif e and maintenance messages, and
system messages.
You can select the displayed
language and also customize some
vehicle control settings to your liking
with the multi-information display
and the three buttons on the steering
wheel (see page ).If you do not f asten your seat belt,
you will see a ‘‘FASTEN SEAT
BELT’’ message on the multi-
inf ormation display when you turn
the ignition switch to the ON (II)
position.
These messages go of f several
seconds af ter the key is inserted into
the ignition switch.
When you unlock and open the
driver’s door, the display shows
‘‘DRIVER 1’’ or ‘‘DRIVER 2’’
depending on which remote
transmitter you use.
The driver’s seat moves to the
positionstoredinthatremote
transmitter (see page ).
71
142
All models except Canadian TSX with4-cylinder engine
Normal Display Messages
Multi-Inf ormation Display
70
Remote transmitter 1 is used.
Remote transmitter 2 is used.
2010 TSX

ÛÝ
You can customize some vehicle
control settings. To enter the
customizing mode, press and hold
either INFO button ( / ) for more
than 3 seconds. To change the
settings, the ignition switch must be
in the ON (II) position, and the
vehicle must be stopped with the
transmission in Park (automatic) or
with the parking brake set (manual).
If you turn the ignition switch to the ACCESSORY (I) or the LOCK (0)
position, move the shif t lever out of
Park (automatic) or release the
parking brake (manual), the display
will change to the normal screen.
If you try to enter the customizing
mode while the vehicle is moving,
you will see a ‘‘MUST STOP AND
SHIFTTOPARKTOCHANGE
SETTINGS’’ (automatic) or ‘‘MUST
STOP AND SET PARK BRAKE TO
CHANGE SETTINGS’’ (manual)
message and you cannot change the
settings.
You can customize some vehicle
control settings f or ‘‘DRIVER 1’’ and
‘‘DRIVER 2’’ separately. If ‘‘DRIVER
1’’ or ‘‘DRIVER 2’’ is not displayed,
customizing is not possible.
To have the driver’s ID detected,
make sure your remote transmitter
is linked to the system and the
driver’s door is unlocked with acorresponding remote transmitter.
If you use the key to unlock the
driver’s door, the system cannot
recognize either ‘‘DRIVER 1’’ or
‘‘DRIVER 2.’’ If the remote transmitter is not
linked, ‘‘DRIVER UNKNOWN
CUSTOMIZE IMPOSSIBLE’’ will be
displayed, and you cannot customize
the settings. See page to link your remote
transmitter to your vehicle.
If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button.
Ref er to the table on the f ollowing
pages about the settings you want to
customize.
128
CONT INUED
Customized Settings
Multi-Inf ormation Display
Inst rument s and Cont rols
81
DRIVER’S ID
2010 TSX

ÎÎ
Î
Î
Î
ÎÎ
Î
Î
Î
Description
Menu Item Page
Group Setup Setting Option
Changes when the doors automatically lock.
Changes which doors unlock with the remote
transmitter in a first push.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also
sound when you press the LOCK button twice.
Changes how long it takes (in seconds) for the
doors to relock and the security system to set after
you unlock but do not open the door.
Changes when the doors automatically unlock.
Set/Cancel all the customized settings as default.
AUTO DOOR LOCK
DOOR LOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK
TIMER
AUTO DOOR UNLOCK
100
101
103
104
106
108
DOOR SETUP
(P.99)
DEFAULT ALL
(P.108)
With IGN OFF
SHIFT FROM P (A/T only)
WITH VEH SPD
OFF
DRIVER DOOR
ALL DOORS
ON
OFF
90 sec
60 sec
30 sec
OFF
SET
CANCEL
1:
2:
3: Default setting
Default setting for automatic transmission
Default setting for manual transmission
With SHIFT to P2
3
1
1
1
1DRIVER DOOR /
AL L DOORS1
Multi-Inf ormation Display
Inst rument s and Cont rols
83
2010 TSX

ÛÝÛÝ
µ
µ
µ
Elapsed Time Reset
You can choose this item to
customize f rom ‘‘METER SETUP’’
by pressing the INFO ( / ) button
repeatedly. Press the SEL/RESET button to see
the selections.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
There are three elapsed time reset
choices you can make:
IGN OFF The elapsed time is
reset when you turn the ignition
switch to the LOCK (0) position.
TRIP A The elapsed time is reset
when Trip A is reset.
TRIP B The elapsed time is reset
when Trip B is reset.
Multi-Inf ormation Display
90
2010 TSX