179
Features
* Not available on all modelsCompass
*
Compass Setting Menu Items
1. Turn the ignition switch to ON
II
.
2. Press and hold the MENU button until the
display shows the compass setting menu
list.
3. Rotate
to select CALIBRATION, then
press
.
4. When the display changes to PUSH CAL
START, press
.
5. Drive the vehicle slowly in two circles.
The compass starts to show a direction
after the calibration. The CAL indicator
goes off. When you turn the ignition switch to ON II
, the compass self-calibrates, and the
compass display appears.
Compass CalibrationIf the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
Compass Compass CalibrationCompass operation can be affected under the
following conditions:
Driving near power lines or stations tCrossing a bridge tPassing a large vehicle, or driving near a large tobject that can cause a magnetic disturbance
When accessories such as antennas and roof racks tare mounted by magnets
Calibrate the compass in an open area.
While setting the compass:
The RETURN button returns to the previous tscreen.
The MENU button cancels the setting mode. t