lock Acura TSX 2011 Workshop Manual

Audio System Basic Operation
Adjusting the Sound
142Features
Press the MENU button, and rotate
to
adjust the setting. Rotate
to scroll through
the following choices:
FADER is selectable.BASS
TREBLE
FADER
BALANCE
SUBW
SVC
CLOCK ADJUST
Adjusting the Sound
When the adjustment level reaches the center, you
will see "C" in the display.
The SVC has four modes: OFF, LOW, MID, and
HIGH.
SVC adjusts the volume level based on the vehicle
speed. As you go faster, audio volume increases. As
you slow down, audio volume decreases.
Adjusting the Sound
Subwoofer
Speed-sensitive
Volume
Compensation
Clock setting
RETURN Button
Selector Knob
MENU Button

161
General Information on the Audio System
Features
Subscribing to XM
® Radio
1. You need your radio ID ready before registering for subscription.
To see the ID in the display: Turn the selector knob until "0" appears.
2. Have your radio ID and credit card number ready, and either call or visit the XM
®
website to subscribe.
Receiving XM
® Radio
Press the
(XM
®) button and stay in this mode for about 30 minutes until
the service is activated. Make sure your vehicle is in an open area with good
reception.
XM
® Radio Display Messages
LOADING: XM
® is loading the audio or program information.
OFF AIR: The channel is not currently broadcasting.
UPDATING: The encryption code is being updated. Channels 0 and 1 still work
normally.
NO SIGNAL: The signal is too weak in the current location.
--------: No such channel exists, the channel is not part of your subscription, or the
artist or title information available.
ANTENNA: There is a problem with the XM
® antenna. Contact a dealer.
Subscribing to XM
® Radio
Contact Information for XM
® Radio:
US: XM
® Radio at www.xmradio.com or (800) 852-
9696
Canada: XM
® Canada at www.xmradio.ca, or (877)
209 - 0079
Receiving XM
® Radio
The XM
® satellites are in orbit over the equator;
therefore, objects south of the vehicle may cause
satellite reception interruptions. Satellite signals
are more likely to be blocked by tall buildings and
mountains the farther north you travel from the
equator.
You may experience reception problems under the
following circumstances:
In a location with an obstruction to the south of
tyour vehicle.
In tunnels tOn the lower level of a multi-tiered road tLarge items carried on the roof rack t
XM
®Radio Service

164Features
General Information on the Audio System
Compatible iPod
® and USB Flash Drives
Compatible iPod
® and USB Flash Drives
iPod
® Model Compatibility
USB Flash DrivesUse a recommended USB flash drive of 256 MB or higher. t
Some digital audio players may not be compatible. t
Some USB flash drives (e.g., a device with security lockout) may not work. t
Some software files may not allow for audio play or text data display. t
Some versions of MP3, WMA, or A AC formats may be unsupported. t
Files on the USB flash drive are played in their stored
order. This order may be different from the order
displayed on your PC or device. USB Flash Drives iPod
® Model Compatibility
This system may not work with all software versions
of these devices.
Model
iPod classic
® (80/160G)
iPod classic ® (120G)
iPod
® with video (iPod
® 5th generation)
iPod nano ®
iPod nano
® 2nd generation
iPod nano ® 3rd generation
iPod nano ® 4th generation
iPod nano ® 5th generation
iPod touch
®
iPod touch
® 2nd generation

177
Continued
Features
Bluetooth
® HandsFreeLink
®
HFL Menus
System Setup
This command group allows you to change or customize HFL basic settings.
To set a four-digit passcode to lock the HFL system for security
1. Say "System Setup."
2. Say "Security."
3. Follow the HFL prompts and say the four-digit number of your choice.
4. Follow the HFL prompts and confirm the number. To change the security passcode
1. Say "System Setup."
2. Say "Change Passcode" after the prompts.
3. Say the new four-digit passcode after the HFL prompts.
4. Follow the HFL prompts. To select a ring tone or a prompt as the incoming call notification
1. Say "System Setup."
2. Say "Call Notification" after the prompts.
3. Say "Ring Tone" or "Prompt" after the prompts. For no audible notification, say
"O f f."
System SetupPress the
button before a command.
Once a passcode is set, you are required to enter
the passcode with every new key cycle to use HFL.
If you forget the code, go to your dealer to have the
passcode reset. You can also cancel the
passcode by clearing all the data stored in the HFL
system.
To clear the system


P. 17 8
The default setting of the incoming notification is a
ring tone.

181
This chapter discusses driving, refueling, and information on items such as accessories.
Driving
Cruise Control .................................... 201
VSA
® (Vehicle Stability Assist), aka
ESC (Electronic Stability Control),
System ............................................ 204
TPMS (Tire Pressure Monitoring
System) ............................................ 206
Tire Pressure Monitoring System (TPMS)-
Required Federal Explanation ........... 208
Braking
Brake System ......................................210
ABS (Anti-lock Brake System) .............212
Brake Assist System .............................213Parking Your Vehicle
When Stopped ....................................214
Parking ...............................................214
Refueling
Fuel Information .................................215
How to Refuel .....................................216
Fuel Economy ...................................... 218
Improving Fuel Economy .....................218
Accessories and Modifications
Accessories .........................................219
Modifications ......................................219 Before Driving
Driving Preparation ............................ 182
Maximum Load Limit ......................... 185
Towing a Trailer
Towing Preparation ............................ 187
Driving Safely with a Trailer ................ 189
Towing Your Vehicle .......................... 190
When Driving
Starting the Engine .............................191
Precautions While Driving ...................193
Automatic Transmissions .................... 194
Shifting (Automatic Transmission) ...... 195
Shifting (Manual Transmission) ........... 199

Before Driving
182Driving
Driving PreparationCheck the following items before you start driving.
Exterior ChecksMake sure there are no obstructions on the windows, door mirrors, exterior t
lights, or other parts of the vehicle.
Remove any frost, snow, or ice. Remove any snow on the roof, as this can slip down and obstruct your field
of vision while driving. If frozen solid, remove ice once it has softened. When removing ice from around the wheels, be sure not to damage the
wheel or wheel components.
Make sure the hood is securely closed. t If the hood opens while driving, your front view will be blocked.
Make sure the tires are in good condition. t Check air pressures, check for damage and excessive wear.
Checking and Maintaining Tires

P. 2 5 9
Make sure there are no people or objects behind or around the vehicle. t
There are blind spots from the inside.

Exterior Checks NOTICE When doors are frozen shut, use warm water
around the door edges to melt any ice. Do not try
to force them open, as this can damage the rubber
trim around the doors. When done, wipe dry to
avoid further freezing.
Do not pour warm water into the key cylinder.
You will be unable to insert key if the water freezes
in the hole.

Before Driving
Driving Preparation
183
Continued
Driving
Do not pile items higher than the seat height. t
They can block your view and may be thrown forward in the event of sudden
braking.
Do not place anything in the front seat footwells. Make sure to secure the floor t
mat. An object or unsecured floor mat can interfere with your brake and
accelerator pedal operation while driving.
If you have any animals on board, do not let them move around in the vehicle. t They may interfere with driving and a crash could occur.
Securely close and lock all doors and the trunk. t
Locking/Unlocking the Door from Inside

P. 9 3
Adjust your seating position properly. t
Adjusting the head restraint, too.
Adjusting the Seats

P.11 6
Adjusting the Head Restraints


P.11 8
Adjust the mirrors and steering wheel properly for your driving. t
Adjust them while sitting in the proper driving position.
Adjusting the Mirrors

P.114
Steering Wheel Adjustments


P.113
Interior ChecksStore or secure all items on board properly. t
Carrying too much cargo, or improperly storing it, can affect your vehicle's
handling, stability, stopping distance, and tires, and make it unsafe.
Maximum Load Limit

P.1 8 5
Interior Checks
The headlight aim is set by the factory, and typically
does not need to be adjusted. However, if you
regularly carry heavy items in the trunk or tow a
trailer, have the aiming readjusted at a dealer or by
a qualified technician.

193
Driving
When Driving
Precautions While Driving
Precautions While Driving
In Rain
Avoid driving in deep water and on flooded roads. This can damage the engine or
cause electrical component failure.
Other Precautions
If there is a strong impact with something under the vehicle, stop in a safe
location. Check the underside of the vehicle for damage any fluid leaks.
Precautions While Driving NOTICE Do not operate the shift lever while pressing
the accelerator pedal. You could damage the
transmission.
If the ignition switch is turned to ACCESSORY
I or
LOCK
0 while driving, the engine will shut down
and all steering and brake power assist functions
will stop, making it difficult to control the vehicle.
Do not put the shift lever in
N
, as you will lose
engine braking (and acceleration) performance.
During the first 600 miles (1,000 km) of operation,
avoid sudden acceleration or full throttle operation
so as to not damage the engine or powertrain.
Avoid hard braking for the first 200 miles (300 km).
You should also follow this when the brakes are
replaced.

195
Continued
Driving
When Driving
Shifting
Change the shift position in accordance with your driving need.
Shift lever positions
Shifting
You cannot turn the ignition switch to LOCK
0 and
remove the key unless the shift lever is in
P.
The vehicle may move forward very slightly even in
N
while the engine is cold.
Depress the brake pedal firmly and, when necessary,
apply the parking brake.
Auomatic transmission models Shifting
Park
Used when parking or starting the
engine
Reverse
Used when backing up
Neutral
Used when idling
Drive
Used for:
Normal driving (gears change t
between 1st and 5th automatically)
Temporarily driving in the sequential t
mode
Drive (S)
Used for:
Automatically changing gears t
between 1st and 4th (4th gear is
used only at high speed)
Driving in the sequential mode t
P
R
N
D
S

198Driving
When Driving
Shifting
Sequential Shift Mode Operation
Sequential Shift Mode Operation
Each paddle shift operation makes a single gear
change.
To change gears continuously, release the paddle
shifter before pulling it again for the next gear.
Recommended Shift Points
Use this table as a guidleline for efficient fuel
economy and effective emission control.
Shift Up Normal Acceleration
1st to 2nd 15 mph (24 km/h)
2nd to 3rd 25 mph (40 km/h)
3rd to 4th 40 mph (64 km/h)
4th to 5th 45 mph (72 km/h)
If the gear position indicator blinks when you try to
shift up or down, this means your vehicle speed is
not in its allowable gear shifting range.
Slightly accelerate to shift up and decelerate to shift
down while the indicator is blinking.
Second gear lock mode
If you pull the
+
paddle shifter while stopped or driving at 6 mph (10 km/h) or
less, the gear position will be locked in 2nd gear. This makes it easier to pull away
on slippery surfaces such as snow covered roads.
To cancel the 2nd gear lock mode, pull the
–
paddle shifter, or move the shift
lever from
S
to
D
.
–
Paddle Shifter
(Shift down)
+
Paddle Shifter
(Shift up)
Downshifting when pulling
the
–
paddle shifter.
(Changes to a lower gear)Upshifting when pulling
the
+
paddle shifter
(Changes to a higher gear)