buttons Acura TSX 2011 Owner's Manual

3Quick Reference Guide
Cruise Control Buttons
P.201
Wipers/Washers
P.108
Navigation System Voice Control Buttons
*
See Navigation System Manual
Bluetooth
® HandsFreeLink
® System Voice Control Buttons
P.167
SEL/RESET Button
P.76

(Information) Button
P.76
Horn Headlights/Turn Signals
P.105
Fog Lights
P.107
Paddle Shifter (Shift down)
*
P.197, 198
Remote Audio Control Buttons
P.160
Paddle Shifter (Shift up)
*
P.197, 198
* Not available on all models

4Quick Reference Guide
Visual Index
Driving Position Memory System Buttons
*
P.111
Door Mirror Controls
P.114
Driver's Front Airbag
P.36
Rearview Mirror
P.114
Passenger's Front Airbag
P.36
Passenger Side Fuse Box
P.296
Parking Brake
P.210
Glove Box
P.126
Accessory Power Socket
P.129
Shift Lever
Automatic Transmission
P.194

Manual Transmission
P.199
Trunk Release
P.95
Hood Release Handle
P.231
Driver Side Fuse Box
P.295
Power Window Switches
P.100
Power Door Lock Master Switch
(Unlocking Fuel Fill Door)
P.93
Driver’s Pocket

12Quick Reference Guide
FM Button AM Button


(XM
®)

Button
AUX But ton CD Button VOL /

(Volume/Power) Knob
(CD Eject) Button
Preset ButtonsCD Slot TITLE Button
CATEGORY Bar SCAN Button
RETURN ButtonMENU Button
Selector Knob Audio Display
SKIP Bar
A.SEL (Auto Select)
ButtonMODE Button
CH ButtonVOL Button
Features

P.137
Audio System
*
P.141
Audio Remote Controls
P.160
VOL (volume) Button
Press
/

to adjust the volume up/
down.
MODE Button
Press and release to change the audio
mode: FM1/FM2/AM/ XM1/ XM2/CD/AUX. CH (channel) Button
Radio: Press and release to change the
preset station.
Press and hold to select the next
or previous strong station.
CD/USB device:
Press and release to skip to the
beginning of the next song or
return to the beginning of the
current song.
Press and hold to change a folder.

Instrument Panel
This chapter describes the buttons, indicators, and gauges that are used
during driving.
Indicators .............................................. 64
Multi-Information Display Warning and
Information Messages ........................ 72
Gauges and
Multi-Information Display
Gauges ................................................ 75
Multi-Information Display .................... 76
63

Operating the Switches Around the Steering Wheel
Driving Position Memory System*
111
Continued
Controls
Driving Position Memory System
Using the multi-information display, you can disable
the automatic seat adjustment function.
Customization Procedure


P. 8 0
You can cancel the driving position memory link
and customized settings. Press and hold the LOCK
and UNLOCK buttons at the same time. The LED in
the remote transmitter blinks twice and the default
settings are restored.
To turn the memory position link settings back on,
repeat this procedure. The LED will blink once.
Driving Position Memory System
*
You can store two driver's seat positions with the driving position memory system.
When you unlock and open the driver's door with a remote transmitter, the seat
adjusts automatically to one of the two preset positions.
The multi-information display shows you which remote transmitter you used to
unlock the vehicle when you enter.
Driver 1 transmitter is linked to memory button 1. t
Driver 2 transmitter is linked to memory button 2. t
* Not available on all models
Driver 1 Driver 2

Operating the Switches Around the Steering Wheel
Driving Position Memory System*
112Controls
1. Adjust the driver's seat to the desired
position, and turn the ignition switch to
ON
II
.
2. Press the SET button.
You will hear the beeper, and the
memory button indicator light will blink.
3. Press memory button
1
or
2
within five
seconds of pressing the SET button.
Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
Storing a Position in Memory
Automatic transmission models 1. Move the shift lever to
P
.
All models 2. Apply the parking brake.
3. Press a memory button (
1
or
2
).
You will hear the beeper, and the
indicator light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
Recalling the Stored Position
Storing a Position in Memory
After you press the SET button, the storing
operation will be canceled when:
You do not press the memory button within five tseconds.
You readjust the seat position before the double- tbeep.
You turn the ignition switch to any position texcept ON
II.
Recalling the Stored Position
The seat will stop moving if you:
Press the SET button, or a memory button ( t
1 or
2).
Adjust the seat position.
t Automatic transmission models Shift into any position except t
P.
Manual transmission models Release the parking brake. t
Memory Button 1
Memory Button 2
Set ButtonMemory Buttons

133
Climate Control System
Continued
Controls
Using Automatic Climate Control
Using Automatic Climate Control
If any buttons are pressed while using the climate
control system in AUTO, the function of the button
that was pressed will take priority.
The AUTO indicator will go off, but functions
unrelated to the button that was pressed will be
controlled automatically.
To prevent cold air from blowing in from outside,
the fan may not start immediately when the AUTO
button is pressed.
Once you have set the desired temperature, do not
use the temperature control switches more than
necessary.
Doing so may delay the time it takes to reach the
set temperature.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on AUTO, and setting the
temperature to low. Change the fresh mode to
recirculation mode until the temperature cools
down.
When you set the temperature to the lower or
upper limit, Lo or Hi is displayed.
Pressing the
button switches the climate
control system between on and off. When turned
on, the system returns to your last selection.
Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the driver's side or passenger's side
control switch.
3. Press the
button to cancel.
Switching between the recirculation and fresh air modes
Press the
button and switch the mode depending on environmental
conditions.
Recirculation Mode (indicator on) : Recirculates air from the vehicle’s interior
through the system.
Fresh Air Mode (indicator off): Maintains outside ventilation. Keep the system in
fresh air mode in normal situations. The automatic climate control system maintains the interior temperature you
select. The system also selects the proper mix of heated or cooled air that will as
quickly as possible, raise or lower the interior temperature to your preference.
* Not available on all models
(Recirculation) Button
(Fan Control) BarFloor and
defroster
vents Floor vents Dashboard and floor
vents, and back of
the center console
*
Dashboard vents
and back of the
center console
*
A /C (Air Conditioning)
Button AUTO Button
Driver's Side
Temperature
Control SwitchPassenger's Side
Temperature
Control Switch

Audio System
138Features
On models with the navigation system, see the Navigation System Manual for
operation of the audio system, AcuraLink*, Bluetooth
® HandsFreeLink
®, and voice
commands for these features.
The audio system features AM/FM radio and the XM
® Radio service. It can also
play CDs, WMA /MP3/A AC files, iPods
®, USB flash drives, and Bluetooth
® devices.
You can operate the audio system from the buttons and switches on the panel, or
the remote controls on the steering wheel.
XM
® Radio
iPod
®
USB Flash
Drive
About Your Audio SystemXM
® Radio is available on a subscription basis only.
For more information on XM
® Radio, contact a
dealer.
General Information on the Audio

System P. 1 61
XM® Radio is available in the United States and
Canada, except Hawaii, Alaska, and Puerto Rico.
XM® is a registered trademark of Sirius XM Radio,
Inc.
Video CDs, DVDs, and 3-inch (8-cm) mini CDs are
not supported.
iPod® is a registered trademark owned by Apple Inc.
MP3 and A AC are standard audio compression
formats. WMA is an audio compression format
developed by Microsoft Corporation.
About Your Audio System
Remote Control
* Not available on all models

Audio System
Auxiliary Input Jack
140Features
Auxiliary Input JackUse the jack in the console compartment to connect standard audio devices.
1. Open the AUX cover.
2. Connect a standard audio device to the
input jack using a 1/8 inch (3.5 mm) stereo
miniplug.

The audio system automatically switches
to the AUX mode.
Auxiliary Input Jack
To switch the mode, press any of the audio mode
buttons. You can return to the AUX mode by
pressing the AUX button.
You cannot use the auxiliary input jack if you
replace the audio system.
Audio System Theft ProtectionThe audio system is disabled when it is disconnected from the power source, such
as when the battery is disconnected or goes dead.
Entering the audio security code
"ENTER CODE" appears on the display when the power is reconnected.
1. Turn on the audio system.
2. Enter the audio security code using the preset buttons. If you enter an incorrect
digit, continue to the last digit, then try again. If you do not enter the code
correctly after 10 tries, you need to visit a dealer to have the system reset.
Audio System Theft Protection
Find the audio system's security code and serial
number on the radio code card.
Do not store the card in your vehicle. If you lose the
radio code card, you must obtain the information
from a dealer.

Audio System Basic Operation
Playing the AM/FM Radio
143
Features
Continued
Playing the AM/FM Radio
AM/FM Button
Press to select a band.
TITLE Button
Press to switch the RDS name
on and off.
CATEGORY Bar
Press either side to display and
select an RDS category.
SCAN Button
Press to sample each of the strongest stations
on the selected band for 10 seconds.
To turn off scan, press the button again.
VOL /
Knob
Press to turn the audio system ON and OFF.
Turn to adjust the volume.
Preset Buttons (1-6)
To store a station:
1. Tune to the selected station.
2. Pick a preset button and hold it
until you hear a beep.
To listen to a stored station, select a
band, then press the preset button.
SKIP Bar
Press and hold to search up and
down the selected band for a station
with a strong signal.
A.SEL (Auto Select) Button
Press to scan both bands and store
the strongest station in each preset.
To turn off auto select, press the
button again. This restores the
presets you originally set.
Selector Knob
Turn to tune the radio frequency.