30
Interface Settings
Color
Illumination control
Priority
Operation
a
button
1
Selects Day, Night, or Off display mode. This button has the highest priority and overrides all other display control adjustments listed below.Remember
: Once you press this button, you assume full
manual control of the display mode until the ignition is turned off.
Sunlight sensor (see your Owner’s Manual for location)
2 If the sunlight sensor detects daylight and the headlights
are turned on, the system automatically overrides the Night display and displays the Day display mode.Remember
: If desired, use the
a
button to override
this automatic choice.
Dash illumination adjustment buttons (see your Owner’s Manual for location)
3
When headlights are turned on, and you wish to have the Day display mode, adjust the illumination to the full brightness setting (beeps).Remember
: Adjust the dash brightness back to mid-range
to allow auto switching by sensing the headlights are on or off.
Headlights (Auto/On/Off)
4 When turned on, the display changes to Night display
mode. The previous three controls listed above can “cancel” this function.Remember
: Use the
a
button, or adjust the dash
illumination to full brightness,
to set the display to your
desired choice.
Screen color choice
N/A
The user can select the color of the screen that will be displayed for the Day and Night display modes described above.Remember
: For best contrast, ensure
that the map color is
white for Day and black for Night.
QRG
System Setup
