Alfa Romeo 166 2008 Owner handbook (in English)

231
The following pages give the various specifications of the vehicle.
These pages will probably represent the main reference point in
this booklet for the “experts and enthusiasts”.
This section should be consulted in order to identify the main cha-
racteristics of your vehicle referred to in the previous chapters.IDENTIFICATION DATA...............................................................................page 232
ENGINE CODES-BODY VERSIONS
.....................................................................233
DIMENSIONS
...........................................................................................................234
ENGINE
......................................................................................................................235
SERVICING
................................................................................................................236
ENGINE OIL CONSUMPTION
..............................................................................236
LUGGAGE COMPARTMENT
..................................................................................237
WEIGHTS
...................................................................................................................237
FUEL SUPPLY - IGNITION
....................................................................................238
PERFORMANCE
.......................................................................................................239
FUEL CONSUMPTION
............................................................................................240
CO
2EMISSIONS......................................................................................................241
BRAKES
.....................................................................................................................241
STEERING
..................................................................................................................242
TRANSMISSION
.......................................................................................................242
FLUIDS AND LUBRICANTS
..................................................................................243
RIM AND TYRES
....................................................................................................245
TYRE INFLATION PRESSURE
...............................................................................247
RADIO FREQUENCY REMOTE CONTROL:
MINISTERIAL HOMOLOGATIONS
.....................................................................251
TECHNICAL SPECIFICATIONS

232 IDENTIFICATION DATA
The identification data should be record-
ed. The identification data is carried on la-
bels in the following positions (fig. 1):
1- Identification label
2- Body label
3- Bodywork paint identification label
4- Engine label.
BODY LABEL
The body label carrying the following in-
formation is located in front of the right
front seat concealed by the lid (A-
fig. 2), it is printed with the body identi-
fication (fig. 3) including:
– Type of vehicle
– Manufacturer’s serial number (chassis
number).
ENGINE LABELS
On the rear left-hand side, gearbox side.
BODYWORK PAINT
IDENTIFICATION LABEL
(fig. 4)
This is applied to the inner part of the
luggage compartment and carries the fol-
lowing data:
A- Paint manufacturer
B- Name of colour
C- Colour code
D- Colour code for touching up and re-
spraying.
A0D0105m
fig. 1
3224CAm
fig. 4
353PGSm
fig. 3
352PGSm
fig. 2

233
IDENTIFICATION LABEL
This is located in the left-hand side of
the boot (next to the battery) (fig. 5).
It carries the following identification da-
ta:
A- Space for details of national ho-
mologation
B- Space for punching the consecutive
chassis numberC- Space available for maximum
weights authorised by various national
laws
D- Space for version and any supple-
mentary indications to those specified
E- Space for smoke index (JTD 20V
Multijet versions only)
F- Space for punching manufacturer’s
name.
ENGINE AND BODY VERSION CODES
3.2 V6 24V JTD 20VMultijet
Engine Code 936A000 936B000
Body Code 936AXB00 17936AXG00 22
3225CAm
fig. 5

234 DIMENSIONS
fig. 6
99527001025
1416
1554
47201800
1542
A0D0106m
– The dimensions are expressed in mm – The height indicated is for an unladen car

235
ENGINE
3.2 V6 24V JTD 20VMultijet
Position Front Front
transversal transversal
Number and arrangement
of cylinders 6 in 60°V 5 in line
Cycle Otto Diesel
Bore 93 mm 82 mm
Stroke 78 mm 90.4 mm
Total cubic capacity 3179 cm32387 cm3
Maximum
horse power kW CEE 176.5 136
CV CEE 240 185
rpm 6200 4000
Max torque
Nm CEE 289 385
kgm CEE 29.4 39.2
rpm 4800 2000

236 SERVICING
Unleaded petrol with no less than 95 R.O.N.
(EN228 Specification)Diesel fuel for motor vehicles
(EN590 Specification) 3.2 V6 24V JTD 20V
Multijet
Fuel
Capacity of fuel tank 69 litres 69 litres– reserve of 9 litres 9 litres
Engine oil (quantity
for periodical change, including
the oil filter change) 5.90 litres 5.0 litres
Gearbox/differential oil
(except versions with electronic
automatic gearbox) 2.0 litres 1.45 litres
Engine cooling system 10.3 litres 9.1 litres
Windscreen washer fluid
reservoir capacity 7 litres 7 litres

237
LUGGAGE COMPARTMENT
WEIGHTS
(*) Loads not to be exceeded. It is the owner’s responsibility to place loads in the boot and/or on the loading surface within the maximum permissible weight limits.
(**) With special fittings (sunroof, trailer towing device, etc.) the unloaded weight increases, thereby reducing the useful capacity with regard to maximum permissible
loads.
3.2 V6 24V JTD 20VMultijet
Capacity (dm3) 490 490
3.2 V6 24V JTD 20V
Multijet
Weight empty (including fluids, 90% fuel in the tank and no optional) 1540 kg 1540 kg
Max. permitted weight (*) 2050 kg 2050 kg
Payload including
driver (**) 510 kg 510 kg
Towable weight 1500 kg 1500 kg
Max. load on ball 60 kg 60 kg

238
FUEL SUPPLY AND IGNITION
3.2 V6 24V JTD 20VMultijet
Supply MPI Bosch Direct injection
Motronic ME7 with variable
electronic geometry
injection turbosupercharger
and ignition and intercooler
with knock electronic
selective control diesel control
Common Rail type
second generation
Spark plugs NGK RPFR6B –
Replace every 100,000 km –
Firing order 1-4-2-5-3-6 –
Injection order – 1-2-4-5-3
(*) There are two different spark plugs, one of each type, per cylinder.
Alterations or repairs to the supply system not carried out correctly or without taking account of the
technical specifications of the system, may cause abnormal functioning with the risk of fire.
WARNING

239
PERFORMANCE
3.2 V6 24V JTD 20VMultijet
Maximum speed 245 km/h 222 km/h
Acceleration from 7.4 s 8.9 s
0-100 km/h
kilometre from stationary 27.5 s 29.0 s