wiper blades Alfa Romeo 4C 2013 Owner handbook (in English)
[x] Cancel search | Manufacturer: ALFA ROMEO, Model Year: 2013, Model line: 4C, Model: Alfa Romeo 4C 2013Pages: 190, PDF Size: 7.87 MB
Page 32 of 190

Move the stalk upwards (unstable
position) to limit operation to the time
for which the stalk is held manually
in this position. When released, the
stalk will return to its initial position and
the screen wiper will be stopped
automatically.
With ring nut A fig. 23 in
position,
the screen wiper will automatically
adapt its operating speed to the speed
of the car.
"Smart washing"
function
Pull the stalk towards the steering
wheel (unstable position) to operate the
screen washer. Keeping the stalk pulled
for more than half a second, with just
one movement it is possible to operate
the screen washer jet and the wiper
at the same time.
The wiper stops working three strokes
after the stalk is released. A further
stroke after approximately 6 seconds
completes the cycle.
WARNING
12) Do not use the screen wiper to
remove layers of snow or ice
from the windscreen. In such
conditions, the screen wiper may
be subjected to excessive stress
and the motor cut-out switch,
which prevents operation for
a few seconds, may intervene. If
operation is not subsequently
restored (even after using the key
to restart the engine), contact
the dedicated Alfa Romeo
Dealership.
13) Do not operate the screen wiper with the blades lifted from the
windscreen.
CRUISE CONTROL(for versions/markets, where provided)
IN BRIEF
This is an electronically controlled
driving assistance device that allows
the desired car speed to be
maintained, without having to press
the accelerator pedal. This device
can be used at a speed above
30 km/h on long stretches of dry,
straight roads with few variations
(e.g. motorways).
It is therefore not recommended to
use this device on extra-urban roads
with traffic. Do not use it in town.
Activation
Turn ring nut A fig. 24 to
.
24
A0L0022
29
24-9-2013 11:49 Pagina 29
Page 152 of 190

NOZZLES
Screen washer
The windscreen washer nozzles are
adjustable fig. 122. They are originally
adjusted at the factory. Should it be
necessary to adjust them again,
contact a dedicated Alfa Romeo
Dealership.
If there is no jet of fluid, firstly check
that there is some fluid in the reservoir
(see paragraph "Checking fluid levels"
in this chapter).
Then check that the nozzle holes are
not clogged; use a needle to unblock
them if necessary.
WARNING
131) Driving with a worn wiper bladeis a serious hazard, because
visibility is reduced in bad
weather.
IMPORTANT
26) Do not operate the screen wiperwith the blades lifted from the
windscreen.
BODYWORKPROTECTION AGAINST
ATMOSPHERIC AGENTS
The car features advanced
technological solutions for effective
protection of the exterior bodywork and
structure.
The best products and best painting
systems lend the exterior bodywork
particularly high resistance to
atmospheric agents (solar radiation,
acid rain, etc.) and gravel, through
specific protections.
The chassis too, in light, corrosion-
resistant alloy, is treated to prevent the
formation of surface oxidation.
CAR CORROSION
WARRANTY
Your car is covered by warranty against
perforation, due to rust, of any original
element of the structure. For the
general terms of this warranty, refer to
the Warranty Booklet.
122
A0L0087
149
24-9-2013 11:50 Pagina 149
Page 188 of 190

– dimensions................................ 165
– reading the rim code ................. 164
– Rim Protector ............................ 164
– rims and tyres ........................... 163
– wheels and tyres ....................... 147
Wheels and tyres – Fix&Go automatic (kit) ............... 115
– tyre inflation pressure................. 166
– wheel repair............................... 115
– Wheels and tyres....................... 147
Window cleaning............................ 28
Windows (cleaning) ........................ 150
Windscreen washer – windscreen washer fluid level .... 141
Windscreen washer nozzles ........... 149
Windscreen wiper – blades ....................................... 148
– replacing blades ........................ 148