lock Alfa Romeo 4C 2020 Owner handbook (in English)

9
THE KEYS
MECHANICAL KEY
Operation
The metal insert 1 fig. 1 operates:
❒ the ignition switch;
❒ the door locks.
KEY WITH REMOTE CONTROL(where provided)
Operation
The metal insert 1 fig. 2 operates:
❒ the ignition switch;
❒ the door locks.
Press button 2 to open/close the metal
insert.
1) 1)
1A0L0005
Door unlocking
Briefly press the Ëbutton:
to unlock doors and switch on ceiling
light for a fixed time; direction indicators
will flash twice (where provided).
The doors are unlocked automatically if
the fuel cut-off system intervenes.
If when locking the doors, one or more
doors are not closed correctly, the LED
flashes quickly together with the
direction indicators.
Door locking
Press button Ábriefly:
to unlock doors and switch off ceiling
light; direction indicators will flash once
(where provided).
2A0L0006
If one or more door are open, the doors
will not be locked. This is indicated by a
rapid flashing of the direction indicators
(where provided). The doors will be
locked if the tailgate is open however.
When the doors are locked from outside
the car (using the remote control), LED 1
fig. 3 will light up for a few seconds and
then start blinking (deterrent function).
When the doors are locked from inside
the car (by pressing the ≈button on
the dashboard) the LED will remain on
constantly.
3A0L0007

IGNITION DEVICE
The key can be turned to three different
positions fig. 5:
❒ STOP: engine off, key can be removed,
steering column locked.
Some electrical devices (e.g. radio,
central door locking system, alarm, etc.)
are still available;
❒ MAR: driving position.
All electrical devices are available;
❒ AVV: engine starting.
The ignition device is fitted with a safety
system that requires the ignition key to
be turned back to STOP if the engine
does not start, before the starting
operation can be repeated.
2) 3)
5A0L0010
KNOWING YOUR CAR
10
KEY WITH REMOTE CONTROL
BATTERY REPLACEMENT
Procedure
1)
❒ press button 1 fig. 4 and move the
metal insert 2 to opening position; turn
screw 3 to :using a small point
screwdriver;
❒ remove battery compartment 4 and
replace battery 5, respecting the polarity;
reinsert compartment 4 in the key and
secure it by turning screw 3 to Á.
1)Press button 2 only with the key away
from your body, especially your eyes and
from objects which could get
damaged (e.g. your clothes). Do not leave
the key unattended to avoid the button
being accidentally pressed while it is
being handled, e.g. by a child.
IMPORTANT
1)Used batteries may be harmful to the
environment if not disposed of correctly.
They must be disposed of as specified by
law in the special containers or taken to
an Alfa Romeo Dealership, which will take
care of their disposal.
WARNING
1)The electronic components inside the
key may be damaged if the key is
subjected to strong shocks. In order to
ensure complete efficiency of the
electronic devices inside the key, it should
never be exposed to direct sunlight.
WARNING

11
STEERING LOCK
Activation
When the key is at STOP, remove the key
and turn the steering wheel until it locks.
Deactivation 4) 5)
Move the steering wheel slightly and turn
the ignition key to MAR.
2)If the ignition device has been
tampered with (e.g. an attempted theft),
have it checked over by the dedicated
Alfa Romeo Dealership before driving
again.
3)Always take the key with you when you
leave your vehicle to prevent someone
from accidentally operating the controls.
Remember to engage the
electric parking brake. Never leave
children
unattended in the vehicle.
4)It is absolutely forbidden to carry out
any after-market operation involving
steering system or steering column
modifications (e.g. installation of
anti-theft device) that could adversely
affect performance and safety, invalidate
the warranty and also result in non-
compliance of the vehicle with
type-approval requirements.
5)Never extract the mechanical key
while the vehicle is moving. The steering
wheel will automatically lock as soon as it
is turned. This holds true for cars being
towed as well.
IMPORTANT
ALFA ROMEO CODE SYSTEM
The Alfa Romeo Code prevents
unauthorised use of the vehicle, disabling
engine starting.
Operation
Each time the car is started by turning
the ignition key to MAR, the Alfa Romeo
CODE system control unit sends an
acknowledgement code to the
Powertrain Control Module to
deactivate the inhibitor.
The code is sent only if the Alfa Romeo
CODE system control unit has
recognised the code transmitted by the
key.
Each time the ignition key is turned to
STOP, the Alfa Romeo CODE system
deactivates the functions of the
Powertrain Control Module.
Activation of warning light while
driving
❒ If the Ydigital warning light on the
display switches on, this means that the
system is running a self-diagnosis (for
example due to a voltage drop).
❒ If the Ydigital warning light remains
on, contact the dedicated Alfa Romeo
Dealership.
ALARM SYSTEM
(where provided)
OPERATION OF THE ALARM
Operation of the alarm is indicated by an
acoustic and visual signal (flashing of the
direction indicators for several seconds).
The alarm activation modes may vary
according to the market. There is a
maximum number of acoustic/visual
cycles. When this is reached the system
returns to normal operation.
IMPORTANT The alarm is adapted
by the Manufacturer to meet the
requirements of the various countries
where the vehicle is marketed.
ARM ALARM
With the doors and tailgate closed and
the ignition key either turned to STOP or
removed, point the key with remote
control towards the car then press and
release the Ábutton.
For some versions, the system emits an
acoustic signal and activates door
locking.

DOORS
DOOR CENTRAL LOCKING/UNLOCKING
Locking from the outside
With the doors closed, press the Ábutton
on the key or turn the metal insert
(located inside the key) in the door lock.
LED 1 fig. 6 on the ≈button on the
dashboard will switch on to indicate that
the doors have locked.
Door locking is carried out with all doors
shut, irrespective of the tailgate
open/closed status.
6A0L0007
Door unlocking from the outside
Press the Ëbutton on the key or turn the
metal insert (located inside the key) in
the driver side door lock.
Door locking/unlocking from the inside
Press the ≈button. The button has an
LED that indicates whether the doors are
locked or unlocked.
LED on: doors locked.
LED off: doors unlocked.
EMERGENCY DOOR LOCKING
DEVICE
Passenger side door
The passenger side door is fitted with a
device to lock it when there is no power.
KNOWING YOUR CAR
12
DISARM ALARM
Press the Ëbutton.
IMPORTANT If the central door locking
system is released using the metal insert
of the key, the alarm is not disabled.
EXCLUDING THE ALARM
To completely disable the alarm (e.g.
during a lengthy period of car inactivity),
lock the car by turning the metal insert of
the key in the door lock.
VOLUMETRIC/ANTI-LIFT PROTECTION
To ensure the correct operation of the
protection, completely close the side
windows.
To disable the volumetric protection,
turn the ignition key from STOP to MAR
twice in a row, then activate the alarm
within 15 seconds, pressing the Ábutton
on the remote control.
To disable the anti-lift protection as well,
the ignition key must be turned from
STOP to MAR three times in a row,
followed by activating the alarm within
15 seconds, pressing the Ábutton on the
remote control.

13
SEATS
ADJUSTMENTS
Lengthwise adjustment
(where provided)
Lift lever 1 fig. 8 and push the seat
forwards or backwards: in the driving
position your arms should rest on the rim
of the steering wheel.
6) 7)
8A0L0011
To lock the door, insert the metal insert
of the ignition key in the housing 1 fig. 7
and turn it clockwise.
To restore the starting condition of the
door locks (only if battery charge
restored), proceed as follows:
❒ press the Ëbutton on the remote
control;
or
❒ press the ≈door locking/unlocking
button on the dashboard;
7A0L0036
or
❒ introduce the metal insert of the
ignition key in the front door pawl;
or
❒ pull the internal door handle.
Door opening/closing mechanism
initialisation
If the battery is disconnected or the
protection fuse blows, the door
opening/closing mechanism must be
initialised as follows:
❒ close all the doors;
❒ press the Ëbutton on the key or the
≈door locking/unlocking button on
the dashboard;
❒ press the Ábutton on the key or the
≈door locking/unlocking button on
the dashboard.

STEERING WHEEL
It can be adjusted axially and vertically.
To adjust, release lever 1 fig. 10, pushing
it forwards (position A). Having made the
adjustment, lock lever 1 by pulling it
towards the steering wheel
(position B).
9) 10)
10A0L0012
KNOWING YOUR CAR
14
Backrest angle adjustment(where provided)
Lift lever 2 fig. 9 and adjust the backrest
angle at the same time.
The backrest angle can be adjusted to
three positions because of special sports
configuration.
6) 8) 2)
Height adjustment (where provided)
In order to achieve the ideal driving
position, the height of the seats can also
be adjusted. Workshop equipment is
required to make this adjustment:
contact a dedicated Alfa Romeo
Dealership.
9A0L0117
6)All adjustments must be made with the
car stationary.
7)After releasing the adjustment lever,
always check that the seat is locked into
place by trying to move it back and forth.
Failure to lock the seat in place could
result in the seat moving suddenly and the
driver losing control of the car.
8)For maximum protection, keep the
backrest upright, lean back into it and
make sure the seat belt fits closely across
your chest and pelvis.
IMPORTANT
2)The fabric upholstery of the seats has
been designed to withstand long-term
wear deriving from normal use of the car.
Some precautions are however required.
Avoid prolonged and/or excessive rubbing
against clothing accessories such as
metal buckles and Velcro strips which, by
applying a high pressure on the fabric in a
small area, could cause it to break,
thereby damaging the upholstery.
IMPORTANT
A
B

REAR FOG LIGHT
Operation
Press the 4fig. 16 button to switch the
light on/off.
The LED on the button lights up to
indicate the activation of the rear fog
light. The rear fog light switches on only
when the dipped headlights are on.
16A0L0024
INTERIOR LIGHTS
ROOF LIGHT
The lens of roof light 1 fig. 17 can be set
to three positions:
❒ right side pressed: light always on
❒ left side pressed: light always off
❒ central position (neutral): the light
turns on and off when the doors are
opened or closed.
17A0L0060
ROOF LIGHT TIMING
To facilitate getting in/out of the car at
night or in poorly lit areas, two timed
modes have been provided.
Timing while getting into the car
The roof light switches on as follows:
❒ for about 10 seconds when the doors
are unlocked;
❒ for about 3 minutes when one of the
doors is opened;
❒ for about 10 seconds when one of the
doors is closed.
The timed period is interrupted when the
ignition is turned to “MAR-ON”.
KNOWING YOUR CAR
18

19
Timing while getting out of the car
After removing the key from the ignition
switch, the roof light will switch on as
follows:
❒ for about 10 seconds, if the key is
removed within 2 minutes of the engine
switching off;
❒ for about 3 minutes when one of the
doors is opened;
❒ for about 10 seconds when one of the
doors is closed.
The timing stops automatically when the
doors are locked.
WINDSCREEN WASHER/
WIPER
This operates only with the ignition key
turned to MAR.
Operation
12) 13)
Ring nut 1 fig. 18 can be set to the
following positions:
å windscreen wiper off;
intermittent operation;
continuous slow operation;
continuous fast operation.
18A0L0021
Move the stalk upwards (unstable
position) to limit operation to the time
for which the stalk is held in this
position. When released, the stalk will
return to its initial position and the
screen wiper will be stopped
automatically.
With ring nut 1 fig. 18 in position,
the windscreen wiper will automatically
adapt its operating speed to the speed
of the vehicle.
12)Do not use the screen wiper to
remove layers of snow or ice from the
windscreen. In such conditions, the
windscreen wiper may be subjected to
excessive stress and the motor cut-out
switch, which prevents operation for a
few seconds, may intervene.
If operation is not restored
(even after restarting that car with the
key), contact a dedicated Alfa Romeo
Dealership.
13)Do not operate the screen wiper with
the blades lifted from the windscreen.
IMPORTANT

KNOWING YOUR CAR
24
BOOT / BONNET
15)
OPENING
IMPORTANT Temperatures higher than
65°C may be reached in the boot during
normal use. Be careful when transporting
objects which may be damaged by
temperatures like these.
Do not keep aerosol cans in the car: they
might explode. Aerosol cans must not be
exposed to temperatures above 50°C.
Procedure 16) 17))
❒ with driver side door open, pull lever 1
fig. 22, located at the point illustrated in
the figure;
22A0L0037
❒ raise the tailgate and release
supporting rod 2 fig. 23 from its locking
device 3;
❒ insert the end of the rod in housing 4
fig. 24, making sure that the rod engages
in the smallest hole of the retaining clip.
Care must be taken to keep the tailgate
raised until the rod is fixed in the correct
position.
18)
23A0L0038
I
MPORTANT Maintain a tight grip on the
tailgate when raising, in order to prevent
any external occurrence (e.g. a gust of
wind) from suddenly opening the tailgate
to end of travel. Additionally, in order to
prevent any damage to the car or broken
windows, do not force the tailgate
beyond the opening position necessary to
secure the supporting rod 2 in the hole of
the retaining clip.24A0L0039

25
CLOSING
Procedure
19)
❒ hold the tailgate up with one hand and
use the other to remove rod 2 fig. 23
from housing 4 fig. 24 and reinsert it in
its locking device 3 fig. 23;
❒ lower the tailgate to approximately
20 centimetres from the engine
compartment and let it drop. Make sure
that the tailgate is completely closed and
not only fastened in safety position by
trying to open it. If it is not completely
closed, do not press the bonnet down,
but raise it and repeat the procedure.
IMPORTANT Always check that the
tailgate is closed correctly to prevent it
from opening while
the car is travelling.
HEADLIGHTS
LIGHT BEAM DIRECTION
The correct orientation of the headlights
is important for the driver’s comfort and
safety as well as for all other road users.
This is also covered by a specific rule of
the highway code.
The headlights must be correctly
directed to ensure the best visibility
conditions for all drivers.
Contact a dedicated Alfa Romeo
Dealership to have the headlights
checked and adjusted.
ADJUSTING THE HEADLIGHTS ABROAD
The dipped beam headlights are aligned
to comply with the regulations of the
country of purchase.
When in countries where you drive on the
other side of the road, you need to alter
the beam direction in order not to dazzle
the vehicles travelling in the opposite
direction, proceeding as follows:
❒ open the protective flap 1 fig. 25 on
the inner wheel arch; it can be located by
steering the wheel completely;
15)The maximum permitted load in the
luggage compartment, in addition to the
kits provided, is 15 kg.
16)When accessing the rear boot,
take care with parts that may be hot,
owing to the adjacent engine
compartment. Danger of serious burns.
17)Perform these operations only when
the car is stationary.
18)The tailgate may drop
suddenly if the supporting rod
is not positioned correctly.
19)For safety reasons, the tailgate must
always be closed properly while the car is
travelling.
Therefore, always make sure that the
tailgate is closed properly and that the
lock is engaged. If you realise during
travel that the lock is not fully engaged,
stop immediately and close the tailgate in
the correct manner.
IMPORTANT