trailer Alfa Romeo 4C 2020 Owner handbook (in English)
[x] Cancel search | Manufacturer: ALFA ROMEO, Model Year: 2020, Model line: 4C, Model: Alfa Romeo 4C 2020Pages: 156, PDF Size: 3.06 MB
Page 107 of 156
105
PERIODIC CHECKS
Every 1,000 km or before long journeys,
check and, if necessary, top up the
following:
❒ engine coolant level;
❒ brake fluid;
❒ windscreen washer fluid;
❒ tyre inflation pressure and condition;
❒ operation of lighting system
(headlights, direction indicators, hazard
warning lights, etc.);
❒ operation of windscreen
washing/wiping system and
positioning/wear of wiper blade.
Every 3,000 km check and top up if
required: engine oil level.
IMPORTANT To find out the correct oil
quantity, always check using the dipstick.
Carry out the check with the vehicle
parked on level ground.
DEMANDING USE OF THE CAR
If the vehicle is used mainly under one of
the following conditions:
❒ trailer or caravan towing;
❒ dusty roads;
❒ short repeated distances (less than
7-8 km) and with external temperatures
below zero;
❒ engine often idling or driving long
distances at low speeds or long periods
of inactivity;
❒ you should perform the following
inspections more frequently than shown
in the Scheduled Servicing Plan:
❒ check front disk brake pad conditions
and wear;
❒ check cleanness of locks, bonnet and
boot and lever cleanness and lubrication;
❒ visually inspect condition of: engine,
gearbox, transmission, pipes and hoses
(exhaust - fuel system - brakes) and
rubber elements (gaiters - sleeves -
bushes - etc.);
❒ check battery charge and battery fluid
level (electrolyte);❒ visually inspect conditions of the
accessory drive belts;
❒ check and, if necessary, change engine
oil and replace oil filter;
❒ check air cleaner and replace it, if
required.
Using the car on track should be regarded
as an exception. The car has been
designed and produced for road use.
Page 122 of 156
TECHNICAL DATA
120
IDENTIFICATION DATA
The identification data of the vehicle are:
❒ Model plate;
❒ Chassis marking;
❒ Bodywork paint identification plate;
❒ Engine marking.
VEHICLE IDENTIFICATION
NUMBER (VIN) PLATE
This is located on the body behind the
driver side seat backrest and bears the
following data fig. 104:
A Manufacturer’s Name
B Type-approval number.
C Vehicle type identification code.
D Chassis manufacture number.
E Maximum authorised weight of
vehicle fully laden.
F Maximum authorised weight of
vehicle when fully laden plus trailer.
G Maximum authorised weight on first
axle (front).
104A0 00@B
H Maximum authorised weight on
second axle (rear).
I Engine type.
L Bodywork version code.
M Spare part number.
N Correct fume coefficient value.
Page 130 of 156
TECHNICAL DATA
128
Versions1750 Turbo Petrol
Unladen weight (with all fluids, fuel tankfilled to 90% and without optional equipment): 993
Payload including the driver: (*) 255
Maximum permitted loads (**)
– front axle: 510
– rear axle: 755
– total: 1230
Towable loads (kg)
– braked trailer: 0
– unbraked trailer: 0
Maximum load on roof: 0
Maximum load on ball joint (braked trailer): 0
(*) If special equipment is fitted, the unladen vehicle weight increases, thus reducing the specified payload within the maximum permitted loads.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment within the maximum permitted loads.
WEIGHTS
Page 144 of 156
SPIDER
142
Versions1750 Turbo Petrol
Unladen weight (with all fluids, fuel tank 999filled to 90% and without optional equipment):
Payload including the driver: (*) 215
Maximum permitted loads (**)
– front axle: 541
– rear axle: 747
– total: 1220
Towable loads (kg)
– braked trailer: 0
– unbraked trailer: 0
Maximum load on roof: 0
Maximum load on ball joint (braked trailer): 0
(*) If special equipment is fitted, the unladen vehicle weight increases, thus reducing the specified payload within the maximum permitted loads.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment within the maximum permitted loads.
TECHNICAL DATA
WEIGHTS