display Alfa Romeo 4C 2021 Instructieboek (in Dutch)

11
STEERING LOCK
Activation
When the key is at STOP, remove the key
and turn the steering wheel until it locks.
Deactivation 4) 5)
Move the steering wheel slightly and turn
the ignition key to MAR.
2)If the ignition device has been
tampered with (e.g. an attempted theft),
have it checked over by the dedicated
Alfa Romeo Dealership before driving
again.
3)Always take the key with you when you
leave your vehicle to prevent someone
from accidentally operating the controls.
Remember to engage the
electric parking brake. Never leave
children
unattended in the vehicle.
4)It is absolutely forbidden to carry out
any after-market operation involving
steering system or steering column
modifications (e.g. installation of
anti-theft device) that could adversely
affect performance and safety, invalidate
the warranty and also result in non-
compliance of the vehicle with
type-approval requirements.
5)Never extract the mechanical key
while the vehicle is moving. The steering
wheel will automatically lock as soon as it
is turned. This holds true for cars being
towed as well.
IMPORTANT
ALFA ROMEO CODE SYSTEM
The Alfa Romeo Code prevents
unauthorised use of the vehicle, disabling
engine starting.
Operation
Each time the car is started by turning
the ignition key to MAR, the Alfa Romeo
CODE system control unit sends an
acknowledgement code to the
Powertrain Control Module to
deactivate the inhibitor.
The code is sent only if the Alfa Romeo
CODE system control unit has
recognised the code transmitted by the
key.
Each time the ignition key is turned to
STOP, the Alfa Romeo CODE system
deactivates the functions of the
Powertrain Control Module.
Activation of warning light while
driving
❒ If the Ydigital warning light on the
display switches on, this means that the
system is running a self-diagnosis (for
example due to a voltage drop).
❒ If the Ydigital warning light remains
on, contact the dedicated Alfa Romeo
Dealership.
ALARM SYSTEM
(where provided)
OPERATION OF THE ALARM
Operation of the alarm is indicated by an
acoustic and visual signal (flashing of the
direction indicators for several seconds).
The alarm activation modes may vary
according to the market. There is a
maximum number of acoustic/visual
cycles. When this is reached the system
returns to normal operation.
IMPORTANT The alarm is adapted
by the Manufacturer to meet the
requirements of the various countries
where the vehicle is marketed.
ARM ALARM
With the doors and tailgate closed and
the ignition key either turned to STOP or
removed, point the key with remote
control towards the car then press and
release the Ábutton.
For some versions, the system emits an
acoustic signal and activates door
locking.

Manual mirror folding
If necessary, fold the mirrors, moving
them from position 1 to position 2 fig.
13.
IMPORTANT When driving, the mirrors
should always be in position 1.
Mirror demisting(where provided)
Press button fig. 14 to enable this
function.
Activation is indicated by the digital
warning light on the display.
Press again to disable the function in
advance.
13A0L0015
14A0L0025
EXTERNAL LIGHTS
The left stalk fig. 15 operates most of
the external lights.
The external lights can only be switched
on when the ignition key is at MAR.
The instrument panel and the dashboard
and central tunnel controls will light up
together with the exterior lights.
15A0L0020
KNOWING YOUR CAR
16
11)As the driver’s door mirror is curved, it
may slightly alter the perception of
distance.
IMPORTANT

27
Alfa DNA SYSTEM
(Car dynamic control system)
This device allows, using lever 1 fig. 28
(on the central tunnel), four car response
modes to be selected according to
driving style and road conditions:
❒ d = Dynamicor Race
(sports driving mode);
❒ n = Natural(mode for driving in normal
conditions);
❒ a = All Weather(mode for driving in
poor grip conditions, such as rain and
snow).
28A0L0108
The lever 1 is a monostable, i.e. it always
remains in the central position.
The selected driving mode is indicated by
the corresponding LED switching on in
the panel and by an indication on the
display.
The device acts on the dynamic car
control systems (engine, steering, ESC,
ASR, ELECTRONIC Q2 systems, etc.).
“Natural” MODE
It is a manufacturer-recommended mode
aimed at comfort and safety in normal
grip and driving conditions.
“DYNAMIC“” MODE
IMPORTANT During the first 250 km of
car utilisation, the Dynamic and Race
modes are inhibited. Within this first
interval of start-up mileage it is advisable
to refrain from an aggressive driving
style, so that the best gear shifting
quality can be achieved over time.
Activation
Move lever 1 fig. 28 upwards (to the
letter “d”) and hold in this position for half
a second, until the corresponding LED
lights up and the “Dynamic” mode
activation indicator appears on the
display.
When released, lever 1 will return to
the central position.
Deactivation
To deactivate “Dynamic” mode and return
to “Natural”, move lever 1 fig. 28
downwards (to letter “a”) and keep it in
this position for half a second.
“Race” MODE
Activation
Move lever 1 fig. 28 upwards (to the
letter “d”) and hold in this position for 5
seconds, until the “Race” mode activation
indicator appears on the display.

KNOWING YOUR CAR
28
Deactivation
To deactivate “Race” mode and return to
“Dynamic”, move lever 1 fig. 28
downwards (to letter “a”) and keep it in
this position for half a second.
“ALL WEATHER”MODE
Activation
Move lever 1 fig. 28 downwards (to the
letter “a”) and hold in this position for half
a second, until the corresponding LED
lights up and the “All Weather” mode
activation indicator appears on the
display.
Deactivation
To deactivate “All Weather” mode and
return to “Natural”, move lever 1 fig. 28
upwards (to letter “d”) and keep it in this
position for half a second.

KNOWING THE INSTRUMENT
PANEL TOOLS
ON BOARD PANEL AND INSTRUMENTS ................................................... 29
DISPLAY ........................................................................................................................32
TRIP COMPUTER ..................................................................................................... 33
WARNING LIGHTS AND MESSAGES............................................................. 34
This section of the handbook gives you all the information
you need to understand, interpret and use
the instrument panel correctly.

KNOWING THE INSTRUMENT PANEL TOOLS
30
CONTROL PANEL AND ON-BOARD INSTRUMENTS
DISPLAY WITH METRIC UNITS
1. Engine coolant gauge 2. Clock 3. Tachometer 4. Mode/gear engaged indicator 5. Gear Shift Indicator 6. External temperature
7. Fuel level gauge (the triangle on the right side of the symbol indicates the side of the car with the fuel filler)
8. Area dedicated to the display of the digital warning light related to the displayed message 9. Trip odometer 10. Speedometer
11. “Alfa DNA” system driving mode 12. Messages or information on display 13. Total odometer.
29A0L0118

31
DISPLAY WITH IMPERIAL UNITS
1. Engine coolant gauge 2. Clock 3. Tachometer 4. Mode/gear engaged indicator 5. Gear Shift Indicator 6. External temperature
7. Fuel level gauge (the triangle on the right side of the






symbol indicates the side of the car with the fuel filler)
8. Area dedicated to the display of the digital warning light related to the displayed message 9. Trip odometer 10. Speedometer
11. “Alfa DNA” system driving mode 12. Messages or information on display 13. Total odometer.
30A0L0129

KNOWING THE INSTRUMENT PANEL TOOLS
32
DISPLAY
The car is equipped with a display that,
according to the previously applied
settings, will show useful driving
information.
GEAR SHIFT INDICATOR
The GSI (Gear Shift Indicator) system
advises the driver to change gear
through a specific indication 5 fig. 29, 30
on the instrument panel.
Through the GSI, the driver is notified
that the gear change will allow a
reduction in fuel consumption.
Therefore, for driving oriented towards
reducing fuel consumption, it is advisable
to stick to “Natural” or “All Weather”
mode and to follow the suggestions of
the Gear Shift Indicator, where traffic
conditions permit.
When the () icon is displayed on the
instrument panel, the GSI suggests
switching to a higher gear, while when
the () icon is displayed, the GSI
suggests shifting to a lower gear.
IMPORTANT The GSI is not active when
the transmission is operating in AUTO
mode.
The indication in the instrument panel
remains on until the driver shifts gear or
the driving conditions go back to a
situation where gearshifting is not
required to improve consumption.
CONTROL BUTTONS fig. 31
: to scroll up through the displayed
screen and the related options or to
increase the displayed value.
SET/
N: press briefly to access the
menu and/or go to next screen or
confirm the selection. Hold down to go
back to the standard screen
: to scroll down through the displayed
menu and the related options or to
decrease the value displayed.IMPORTANT Buttons and activate
different functions according to the
following situations:
❒ within the menu, they allow you to
scroll up or down through the options;
❒ during setting operations, they
increase or decrease the displayed value;
❒ outside the menu they allow
to adjust the on board panel
brightness.
MAIN MENU
The menu comprises a series of options
which can be selected using the and 
buttons to access the different selection
and setting (Setup) operations indicated
below.
31A0L0125

33
Some options have a submenu. The menu
can be activated by briefly pressing the
SET/
Nbutton.
The menu includes the following items:
❒ MENU
❒ SPEED BEEP
❒ TRIP B ACTIVATION/DATA
❒ SET TIME
❒ SET DATE
❒ AUTOCLOSE (where provided)
❒ UNIT OF MEASUREMENT
❒ LANGUAGE
❒ WARNING VOLUME
❒ BELT BUZZER/BEEP (may only be
displayed after the SBR system is
deactivated by a dedicated Alfa Romeo
Dealership)
❒ SERVICE
❒ AIRBAG/PASSENGER BAG
❒ DAYTIME RUNNING LIGHTS (where
provided)
❒ EXIT MENU
Selecting an option from the main
menu without a submenu:
❒ press the SET/Nbutton briefly to
select the main menu setting you wish to
change;
❒ press buttons or (with single
presses) to select the new setting;
❒ press the SET/
Nbutton briefly to
save the new setting and go back to the
previous main menu option.
Selecting an option from the main
menu with a submenu:
❒ briefly press the
SET/
Nbutton briefly to see the first
submenu option;
❒ press buttons or (single presses)
to scroll all options in the submenu;
❒ briefly press the
SET/
Nbutton to select the option of
the displayed submenu to access the
respective submenu;
❒ press the buttons or (with single
presses) to select the new setting for the
specific submenu option;
❒ briefly press the SET/
Nbutton to
store the setting and go back to the same
item of the previously selected menu
at the same time.
TRIP COMPUTER
The Trip computer is used to display
information on car operation when the
key is turned to MAR.
This function is characterised by two
separate records, called “Trip A” and
“Trip B”, where the car’s “complete
missions” (journeys) are recorded in a
reciprocally independent manner.
Both memories can be reset: i.e. start of a
new journey.
“Trip A” can be used to display the values
relating to:
❒ Range
❒ Distance travelled
❒ Average consumption
❒ Instantaneous consumption
❒ Average speed
❒ Trip time (driving time).
“Trip B” may be used to display the
figures relating to:
❒ Distance travelled B
❒ Average consumption B
❒ Average speed B
❒ Trip time (driving time).
The “Trip B” function may be excluded.
“Range” and “Instant consumption” values
cannot be reset.

KNOWING THE INSTRUMENT PANEL TOOLS
34
WARNING LIGHTS AND MESSAGES
IMPORTANT The warning light switches on in the instrument panel together with a dedicated message and/or acoustic signal when
applicable. These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to
the information contained in the Owner Handbook, which you are advised to read carefully in all cases. Always refer to the information
in this section in the event of a failure indication.
IMPORTANT Failure indications displayed are divided into two categories: very serious and less serious failures. Serious faults are
indicated by a repeated and prolonged warning “cycle”. Less serious faults are indicated by a warning “cycle” with a shorter duration.
The display cycle of both categories can be interrupted. The instrument panel warning light will stay on until the cause of the
malfunction is eliminated.
WARNING LIGHTS ON INSTRUMENT PANEL
Warning lights on panelMeaning What to do
Restore the brake fluid level, then check that the warning
light has switched off.
If the warning light stays on, contact a dedicated Alfa
Romeo Dealership.
Release the handbrake, then check that the warning light
has switched off.
If the warning light stays on, contact a dedicated Alfa
Romeo Dealership.
LOW BRAKE FLUID/HANDBRAKE APPLIED
The warning light switches on when the key is turned to
MAR-ON, but it should switch off after a few seconds.
Low brake fluid level
The warning light turns on when the level of the brake fluid
in the reservoir falls below the minimum level, possibly
due to a leak in the circuit.
Handbrake engaged
The warning light switches on when the handbrake is
engaged.