seat adjustment Alfa Romeo 4C 2021 Instructieboek (in Dutch)

13
SEATS
ADJUSTMENTS
Lengthwise adjustment
(where provided)
Lift lever 1 fig. 8 and push the seat
forwards or backwards: in the driving
position your arms should rest on the rim
of the steering wheel.
6) 7)
8A0L0011
To lock the door, insert the metal insert
of the ignition key in the housing 1 fig. 7
and turn it clockwise.
To restore the starting condition of the
door locks (only if battery charge
restored), proceed as follows:
❒ press the Ëbutton on the remote
control;
or
❒ press the ≈door locking/unlocking
button on the dashboard;
7A0L0036
or
❒ introduce the metal insert of the
ignition key in the front door pawl;
or
❒ pull the internal door handle.
Door opening/closing mechanism
initialisation
If the battery is disconnected or the
protection fuse blows, the door
opening/closing mechanism must be
initialised as follows:
❒ close all the doors;
❒ press the Ëbutton on the key or the
≈door locking/unlocking button on
the dashboard;
❒ press the Ábutton on the key or the
≈door locking/unlocking button on
the dashboard.

STEERING WHEEL
It can be adjusted axially and vertically.
To adjust, release lever 1 fig. 10, pushing
it forwards (position A). Having made the
adjustment, lock lever 1 by pulling it
towards the steering wheel
(position B).
9) 10)
10A0L0012
KNOWING YOUR CAR
14
Backrest angle adjustment(where provided)
Lift lever 2 fig. 9 and adjust the backrest
angle at the same time.
The backrest angle can be adjusted to
three positions because of special sports
configuration.
6) 8) 2)
Height adjustment (where provided)
In order to achieve the ideal driving
position, the height of the seats can also
be adjusted. Workshop equipment is
required to make this adjustment:
contact a dedicated Alfa Romeo
Dealership.
9A0L0117
6)All adjustments must be made with the
car stationary.
7)After releasing the adjustment lever,
always check that the seat is locked into
place by trying to move it back and forth.
Failure to lock the seat in place could
result in the seat moving suddenly and the
driver losing control of the car.
8)For maximum protection, keep the
backrest upright, lean back into it and
make sure the seat belt fits closely across
your chest and pelvis.
IMPORTANT
2)The fabric upholstery of the seats has
been designed to withstand long-term
wear deriving from normal use of the car.
Some precautions are however required.
Avoid prolonged and/or excessive rubbing
against clothing accessories such as
metal buckles and Velcro strips which, by
applying a high pressure on the fabric in a
small area, could cause it to break,
thereby damaging the upholstery.
IMPORTANT
A
B