technical data Alfa Romeo Giulia 2019 User Guide

DIMENSIONS
Dimensions are expressed in inches/mm and refer to the car equipped with its original tyres. Height is measured with car unladen.
AB C D EFGH I
31.3 / 795 111 / 2820 40.5 / 1028 182.8 / 464356.5
/
1436(*)57 /
1450(**)
61.3 /
1557(*)61.4 /
1559(**)
64 / 1625(*)63.1 /
1604(**)79.7 / 2024 73.2 / 1860
(*) RWD versions
(**) AWD versions
Small variations with respect to the reported values are possible depending on the dimensions of the rims.
16410106S0001EM
190
TECHNICAL DATA

REFUELLING
86) 87)
2.0 T4 MAir 2.2 JTDPrescribed fuels and original
lubricants
Fuel tank [UK gal (litres)] 12.76 (58) 11.4 (52)Unleaded petrol
(EN228 specifications)
(2.0 T4 MAir engine) / Automotive
diesel fuel (EN590 and
EN16734 specifications)
(2.2 JTD engine) including a reserve of [UK gal
(litres)]1.98 (9.0) 1.76 (8.0)
AdBlue® tank (where provided)
capacity approximately [UK gal
(litres)]– 3.5 / 16.1AdBlue® (DIN 70 070 and ISO
22241-1 specifications)
(2.2 JTD engine)
Primary cooling system (versions
with manual transmission) [UK
gal (litres)]1.89 (8.6) 1.75 (8.0)
50% mixture of distilled water
and PARAFLU UP
(*)Primary cooling system (versions
with automatic transmission) [UK
gal (litres)]1.89 (8.6)1.92 (8.75) (136 HP/160 HP/
190 HP RWD engines) / 1.96 (8.9)
(190 HP/210 HP AWD engines)
Secondary cooling system [UK
gal (litres)]0.95 (4.3)1.16 (5.3) (190 HP/210 HP AWD
automatic transmission engines)
Engine oil filter [UK gal (litres)] 0.13 (0.6) 0.11 (0.5)SELENIA DIGITEK P.E.
(2.0 T4 MAir engine) / SELENIA
W.R. FORWARD 0W-20 (2.2 JTD
engine) (versions with AdBlue®) /
SELENIA W.R. FORWARD 0W-20
(2.2 JTD 150 HP / 180 HP
engines) (versions without
AdBlue®) / SELENIA W.R.
FORWARD 0W-30 (2.2 JTD
210 HP engines) (versions without
AdBlue®) Engine oil sump [UK gal (litres)] 1.01 (4.6)0.68 (3.1) (RWD versions) / 0.85
(3.9) (AWD versions)
(*) When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLU UP and 40% demineralised water.
192
TECHNICAL DATA

2.0 T4 MAir 2.2 JTDPrescribed fuels and original
lubricants
AWD System FAD transfer case
[UK
gal (litres)]0.11 (0.5) 0.11 (0.5)TUTELA TRANSMISSION
HYPOIDE GEAR OIL
AWD System TRANSFER CASE
[UK gal (litres)]0.15 (0.7) 0.15 (0.7)TUTELA TRANSMISSION
TRANSFER CASE
IMPORTANT
86)Use AdBlue®only according to DIN 70 070 and ISO 22241-1. Other fluids may cause damage to the system: also exhaust emissions would no
longer comply with the law.
87)The distribution companies are responsible for the compliance of their product. Observe the precautions of storage and maintenance, in order
to preserve the initial qualities. The manufacturer will not recognise any guarantee in case of malfunctions and damage caused to the car due to
the use of UREA (AdBlue
®) not in accordance with regulations.
194
TECHNICAL DATA

Use Features SpecificationOriginal fluids and
lubricantsApplications
Lubricants and greases
fordrive transmissionATF Synthetic lubricant 9.55550-AV5TUTELA TRANSMISSION
AS 8
Contractual Technical
Reference No. F139.I11Automatic transmission
SAE 70W API
GL-4 synthetic lubricant9.55550-MZ7TUTELA TRANSMISSION
GEARSYNTH LV
Contractual Technical
Reference No. F055.N15Manual transmission
GETRAG G217 (2.2 JTD
engine)
SAE 75W-85 synthetic
lubricant9.55550-DA9TUTELA TRANSMISSION
LS AXLE FLUID
Contractual Technical
Reference No. F059.N15Differential
RDU 230-LSD RDU
210-eLSD RDU 210/215
-LSD (2.2 JTD engine)
SAE 75W-80 APL
GL-5 synthetic lubricant9.55550-DA10TUTELA TRANSMISSION
HYPOIDE GEAR OIL
Contractual Technical
Reference n° F060.N15AWD System FAD transfer
case
SAE 75W synthetic
lubricant9.55550-DA11TUTELA TRANSMISSION
TRANSFER CASE
Contractual Technical
Reference No. F061.N15AWD System TRANSFER
CASE
Lubricants and greases
for drive transmissionNLGI 0-1 grease for
constant velocity joints
with low friction
coefficient9.55580-GRAS IITUTELA STAR 700
Contractual Technical
Reference No. F701.C07Differential side constant
velocity joints
NLGI 1-2 molybdenum
disulphide grease for high
temperatures9.55580-GRAS IITUTELA ALL STAR
Contractual Technical
Reference No. F702.G07Wheel side constant
velocity joints
Brake fluid DOT 4 9.55597TUTELA BRAKE FLUID
EXTREME HT
Contractual Technical
Reference No. F001.N15Hydraulic brakes and clutch
controls
196
TECHNICAL DATA

PERFORMANCE
Top performance after the initial period of car usage.
Versions Maximum speed [mph / km/h]Acceleration from 0-60 mph /
(0-100 km/h) [sec]
2.0 T4 MAir 200 HP RWD(*)146 / 235 6.7
2.0 T4 MAir 280 HP RWD
(*)149 / 240 5.7
2.0 T4 MAir 280 HP AWD
(*)149 / 240 5.2
2.2 JTD 136 HP RWD
(**)130 / 210 9.7
2.2 JTD 136 HP RWD
(**) (***)130 / 210 9.7
2.2 JTD 160 HP RWD
(**)137 / 220 8.4
2.2 JTD 160 HP RWD
(**) (***)137 / 220 8.4
2.2 JTD 190 HP RWD
(**)143 / 230 7.2
2.2 JTD 190 HP RWD
(**) (***)143 / 230 7.2
2.2 JTD 136 HP RWD
(*)130 / 210 9.5
2.2 JTD 136 HP RWD
(*) (***)130 / 210 9.5
2.2 JTD 160 HP RWD
(*)137 / 220 8.1
(*) Automatic transmission
(**) Manual transmission
(***) Version for specific markets.
198
TECHNICAL DATA

FUEL CONSUMPTION AND CO2EMISSIONS
The fuel consumption and CO2emission figures declared by the manufacturer are determined on the basis of the type-approval
tests laid down by the applicable standards in the country where the vehicle is registered.
The type of route, traffic conditions, weather conditions, driving style, general condition of the car, trim level/equipment/
accessories, use of the climate control system, car load, presence of roof racks and other situations that adversely affect the
aerodynamics or wind resistance lead to different fuel consumption values than those measured. The fuel consumption will only
become more regular after driving the first 3000 km.
To find the specific fuel consumption and CO
2emission figures for this car, please refer to the data in the Certificate of Conformity,
and the related documentation that accompanies the vehicle.
200
TECHNICAL DATA