jack points Alfa Romeo GT 2007 Owner handbook (in English)

IN AN EMERGENCY
214
Take care when position-
ing the arms of the lift or
workshop lift to avoid dam-
aging the side strips.
USING AN ARM LIFT OR
WORKSHOP LIFT
The car must only be lifted laterally posi-
tioning the ends of the arms or the workshop
lift in the areas illustrated, approx. 40 cm from
the profile of the wheelhouse (fig. 57).These points are identified by symbol
▼
on the bottom of the sidemember.
The car may fall if the jack
is not positioned correctly.
Never use the jack for
higher capacities than the one stat-
ed on the label.
IMPORTANTFor versions with Sele-
speed transmission, make sure that the
gears are in neutral (N) (checking that the
car moves if pushed) and then proceed as
for towing a normal car with mechanical
transmission, following the instructions giv-
en previously.
Should it be impossible to set the gears to
neutral, do not tow the car and contact Al-
fa Romeo Authorised Services.Do not start the engine
when towing the car.
IF THE CAR IS TO BE LIFTED
fig. 57
A0A0672b