oil viscosity Alfa Romeo GT 2008 Owner handbook (in English)

CAR MAINTENANCE
224
ENGINE OIL (fig. 5-6-7-8)
The engine oil should be checked with the
car on a level surface a few minutes (about
5) after the engine has been switched off.
Remove the dipstick (A), clean it, put it
back in completely, remove it and check that
the level is within the MINandMAX
marks on the dipstick. The interval between
theMINandMAXmarks correspond to
about one litre of oil.When the engine is hot,
take care when working
inside the engine compart-
ment to avoid burns. Remember
that when the engine is hot, the
fan may cut in: danger of injury.
Never add oil with char-
acteristics (classification,
viscosity) which are differ-
ent from those of the oil already in
the circuit.
fig. 6 - 2.0 JTS version
A0A0682b
fig. 8 - JTD 16Vversion
A0A0398b
AB
fig. 7 - 3.2 V6version
A0A0406b
fig. 5 - 1.8 T. SPARK version
A0A0737b
If the oil level is near or even below the
MINmark, add oil through the filter neck
(B), until reaching the MAXmark.
IMPORTANTIf a routine check reveals
that the level is above the MAXmark, con-
tact Alfa Romeo Authorised Services to have
the correct level restored.
IMPORTANTAfter topping up the oil,
before checking the level again, run the en-
gine a few seconds and wait for a few min-
utes after stopping it.