technical specifications Alfa Romeo MiTo 2021 Owner handbook (in English)

GENERAL INFORMATION 1.3 JTDM-290 HP(*)1.3 JTDM-295 HP
Engine code 955B2000 330A1000
Cycle Diesel Diesel
Number and position of cylinders 4 in line 4 in line
Piston bore and stroke (mm) 69.6 × 82 69.6 × 82
Total displacement (cm³) 1248 1248
Compression ratio 16.8 16.8
Maximum power (EC) (kW) 66 70
Maximum power (EEC) (HP) 90 95
corresponding engine speed (rpm) 3750 3750
Maximum torque (EC) (Nm) 200 200
Maximum torque (EC) (kgm) 20.4 20.4
corresponding engine speed (rpm) 1500 1500
FuelDiesel for motor vehicles
(EN590 Specification)Diesel for motor vehicles
(EN590 Specification)
(*) Version for specific markets
158
TECHNICAL SPECIFICATIONS

Versions Wheels Tyres provided Snow tyresSpace saver spare wheel
Rim Tyre
1.4 Turbo Petrol/LPG
120 HP7Jx16 ET 39 195/55 R16 87H195/55 R16 87H
(M+S)
135/70 R16 4B x 16 ET 15 7Jx17 ET 39
215/45 R17 87V(*)215/45 R17 87H
(M+S)
7 1/2 Jx18 ET 42215/40 R18 89W XL
(*)215/40 R18 89H
(M+S)
1.4 Turbo Multi Air /
1.4 Turbo Multi Air
Veloce6Jx15 ET 40
(**)185/65 R15 88V(**)185/65 R15 88Q
(M+S)
135/70 R16 4B x 16 ET 15 7Jx16 ET 39 195/55 R16 87V195/55 R16 87H
(M+S)
7Jx17 ET 39
(**)205/45 R17 88W XL(**)205/45 R17 88H
(M+S)
7Jx17 ET 39
(**)215/45 R17 87V(**)215/45 R17 87H
(M+S)
7Jx17 ET 39
215/45 R17 87W
(*)215/45 R17 87H
(M+S)
7 1/2 Jx18 ET 42215/40 R18 89W XL
(*)215/40 R18 89H
(M+S)
1.4 Turbo MultiAir TCT7Jx16 ET 39 195/55 R16 87V195/55 R16 87H
(M+S)
135/70 R16 4B x 16 ET 15 7Jx17 ET 39 215/45 R17 87V215/45 R17 87H
(M+S)
7 1/2Jx18 ET 42 215/40 R18 89W XL215/40 R18 89H
(M+S)
(*) Tyres which cannot be fitted with chains
(**) Where fitted
160
TECHNICAL SPECIFICATIONS

COLD TYRE INFLATION PRESSURE (bar)
TYRES PROVIDED
VERSIONS MEASUREMENTMEDIUM LOAD FULL LOAD
Front Rear Front Rear
Turbo TwinAir185/65 R15 88H
195/55 R16 87H
215/45 R17 87V
215/45 R17 87W
215/40 R18 89W XL2.3
2.3
2.2
2.2
2.32.1
2.1
2.1
2.1
2.12.3
2.3
2.3
2.3
2.32.3
2.3
2.3
2.3
2.3
1.4-litre Petrol185/65 R15 88T
195/55 R16 87H
215/45 R17 87V
215/45 R17 87W
215/40 R18 89W XL2.3
2.3
2.2
2.2
2.32.1
2.1
2.1
2.1
2.12.3
2.3
2.3
2.3
2.32.3
2.3
2.3
2.3
2.3
1.4 Turbo Petrol/LPG
120 HP195/55 R16 87H
215/45 R17 87V
215/40 R1889WXL2.3
2.3
2.42.1
2.1
2.22.5
2.6
2.72.3
2.3
2.4
1.4 Turbo Multi Air /
1.4 Turbo Multi Air
Veloce185/65 R15 88V
195/55 R16 87V
205/45 R17 88W XL
215/45 R17 87V
215/45 R17 87W
215/40 R18 89W XL2.3
2.3
2.4
2.3
2.3
2.42.1
2.1
2.2
2.1
2.1
2.22.5
2.5
2.8
2.6
2.6
2.72.3
2.3
2.5
2.3
2.3
2.4
1.4 Turbo MultiAir TCT195/55 R16 87V
215/45 R17 87V
215/40 R18 89W XL2.3
2.3
2.42.1
2.1
2.22.5
2.6
2.72.3
2.3
2.4
1.3 JTD
M-2
195/55 R16 87H
215/45 R17 87V
215/40 R18 89W XL2.3
2.3
2.62.1
2.1
2.42.6
2.5
2.62.3
2.3
2.4
Space saver spare
wheel135/70 R16 4.2
162
TECHNICAL SPECIFICATIONS

SNOW CHAINS
47)
The use of snow chains should be in
compliance with local regulations. The
snow chains may be applied only onto the
front wheel (drive wheels).
Check the tension of the snow chains
after the first few metres have been
driven.
Use low-clearance snow chains: for tyres
185/65 R15 88H (where provided),
195/55 R16 and 205/55 R16, use
low-clearance snow chains with a
maximum projection beyond the tyre
profile of 9 mm.
IMPORTANT The space-saver wheel
cannot be fitted with snow chains. If a
front (drive) wheel is punctured and snow
chains must be used, you must remove a
normal wheel from the rear axle and
replace it with the space-saver wheel. In
this way, with two normal drive wheels, it
is possible to use snow chains.
WARNING
146)The maximum speed for snow tyres
marked “Q” is 160 km/h, while it is 190 km/h
for “T” tyres and 210 km/h for "H" tyres. The
highway code speed limits must however
always be complied with.147)DO NOT fit wheel hub caps when using
integral hub caps fixed (with springs) to the
steel rim and after sale tyres provided with
Rim Protector. Use of unsuitable tyres and
wheel caps may cause sudden decrease of
tyre pressure.
IMPORTANT
47)Keep the vehicle's speed down when
snow chains are fitted; never exceed
50 km/h. Avoid potholes, steps and
pavements and avoid driving long distances
on roads not covered with snow to avoid
damaging the car and the roadbed.
164
TECHNICAL SPECIFICATIONS

WEIGHTS
Weights (kg) Turbo TwinAir 1.4-litre Petrol
Unladen weight (with all fluids, fuel tank filled to
90% and without optional equipment)1130 1080
Payload including the driver
(*)480(**)/ 560(***)480(**)/ 560(***)
Maximum permitted loads(****)
– front axle 950 850
– rear axle 850 850
– total
1610
(**)/ 1690(***)1560(**)/ 1640(***)
Towable loads
– braked trailer 500 500
– trailer without brakes 400 400
Maximum load on roof 40 40
Maximum load on tow hitch (trailer with brakes) 60 60
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload in relation to the
maximum permissible loads.
(**) 4-seater versions
(***) 5-seater versions
(****) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform within the maximum
permitted loads.
166
TECHNICAL SPECIFICATIONS

Weights (kg) 1.4 Turbo MultiAir TCT 1.3 JTDM-2
Unladen weight (with all fluids, fuel tank filled to 90% and
without optional equipment)1170 1150
Payload including the driver
(*)480(**)/ 560(***)480(**)/ 560(***)
Maximum permitted loads(****)
– front axle 950 950
– rear axle 850 850
– total
1650
(**)/ 1730(***)1630(**)/ 1710(***)
Towable loads
– braked trailer 500 1000
– trailer without brakes 400 400
Maximum load on roof 40 40
Maximum load on tow hitch (trailer with brakes) 60 60
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload in relation to the
maximum permissible loads.
(**) 4-seater versions
(***) 5-seater versions
(****) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform within the maximum
permitted loads.
IMPORTANT On versions 1.4 Turbo Multi Air TCT 135 HP towing trailers is prohibited.
168
TECHNICAL SPECIFICATIONS

1.4 Turbo Petrol/LPG 120 HP 1.4 Turbo MultiAir
Prescribed fuels and original
lubricants
litres kg litres kg
Fuel tank 45 – 45 –Unleaded petrol not less than
95 RON
(EN228 specification)/LPG
(1.4 Turbo Petrol/LPG 120 HP
versions)
Unleaded petrol not less than
95 RON
(EN228 specification)
(1.4 Turbo MultiAir versions) LPG tank (1.4 Turbo Petrol/LPG
120 HP versions)
(*)39 – – –
including a reserve of 5 - 7 – 5 - 7 –
Engine cooling system (with
climate control)6.3 5.0 6.0 5.3Mixture of distilled water and
PARAFLU fluid
UP
50%(**)
Engine sump 2.75 2.4 3.1 2.6SELENIA MULTIPOWER GAS
5W-40 (1.4 Turbo Petrol/LPG
120 HP versions)
SELENIA DIGITEK P.E.
(1.4 Turbo MultiAir versions) Engine sump and filter 3.3 2.9 3.5 3.0
Gearbox casing/differential 2.0 1.7 2.0 1.7TUTELA TRANSMISSION
GEARFORCE
Hydraulic brake circuit with ABS
(Anti-lock braking system)0.53 0.5 0.53 0.5 TUTELA TOP 4/S
Windscreen/rear
window/headlight washer fluid
reservoir
(***)2.2 (4.5) 1.9 (4.0) 2.2 (4.5) 1.9 (4.0)Mixture of water and TUTELA
PROFESSIONAL SC 35
(*) Maximum refuelling capacity including reserve
(**) When the vehicle is used in particularly harsh weather conditions, we recommend using a 60-40 mixture of PARAFLUUPand demineralised water.
(***) Values in brackets refer to versions with headlight washer
170
TECHNICAL SPECIFICATIONS

FLUIDS AND LUBRICANTS
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the
Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission specifications.
Lubricant quality is crucial for engine operation and duration.
PRODUCT SPECIFICATIONS
48)
Use Features SpecificationOriginal fluids and
lubricantsReplacement interval
Lubricant for petrol
engines (Turbo TwinAir
105 HP / 1.4 Turbo Multi
Air versions)SAE 0W-30 ACEA C2 /
API SN9.55535-GS1 or
MS.90048SELENIA DIGITEK P.E.
Contractual Technical
Reference No. F020.B12According to Scheduled
Servicing Plan
Lubricant for petrol
engines (1.4 Petrol
versions)SAE 5W40 ACEA C3 /
API SN9.55535–S2SELENIA StAR P.E.
Contractual Technical
Reference No. F603.D08According to Scheduled
Servicing Plan
Lubricant for petrol/LPG
engines (1.4 Turbo
Petrol/LPG 120 HP
versions)SAE 5W-40 ACEA C3 /
API SN9.55535-T2.SELENIA MULTIPOWER
GAS 5W-40
Contractual Technical
Reference No. F922.E09According to Scheduled
Servicing Plan
Lubricant for diesel
enginesSAE 0W-30 ACEA C2 /
API SN9.55535-DS1 or
MS.90047SELENIA WR FORWARD
Contractual Technical
Reference No. F842.F13According to Scheduled
Servicing Plan
If lubricants conforming to the required specification are not available, products that meet the indicated specifications can be used
to top up; in this case optimal performance of the engine is not guaranteed.
172
TECHNICAL SPECIFICATIONS

Use Features SpecificationOriginal fluids and
lubricantsApplications
Lubricants and greases
for drive transmissionSAE 75W grade
synthetic lubricant.9.55550-MZ6 or
MS.90030–M1TUTELA TRANSMISSION
GEARFORCE
Contractual Technical
Reference No. F002.F10Mechanical differentials
and gearboxes
Molybdenum disulphide
grease, for use at high
temperatures. N.L.G.I.
consistency 1-2FIAT 9.55580 – GRASS IITUTELA ALL STAR
Contractual Technical
Reference No. F702.G07Wheel side constant
velocity joints
Grease for constant
velocity joints with low
friction coefficient.
N.L.G.I. consistency 0-1FIAT 9.55580 – GRASS IITUTELA STAR 700
Contractual Technical
Reference No. F701.C07Differential side constant
velocity joints
Lubricant for
electro-hydraulic
actuator (versions with
Alfa TCT)Fully synthetic oil with
dedicated additive9.55550-SA1 or
MS.90030-H1TUTELA CS SPEED
Contractual Technical
Reference No. F005.F98Lubricant for
electro-hydraulic
actuator
Brake fluidSynthetic fluid for brake
and clutch systems.
Exceeds specifications
FMVSS no. 116 DOT 4,
ISO 4925 SAE J1704.9.55597 or MS.90039TUTELA TOP 4/S
Contractual Technical
Reference No. F001.A93Hydraulic brakes and
hydraulic clutch controls
Protective agent for
radiatorsRed protective with
antifreeze action, based
on inhibited monoethyl
glycol with organic
formula. Exceeds CUNA
NC 956-16, ASTM D
3306 specifications.9.55523 or MS.90032PARAFLU
UP(*)
Contractual Technical
Reference No.
F101.M01Percentage of use: 50%
distilled water 50%
PARAFLUUP(**)
(*)IMPORTANT Do not top up or mix with other fluids which have different specifications from those described.
(**)When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60%PARAFLUUPand 40% demineralised
water.
173

Use Features SpecificationOriginal fluids and
lubricantsApplications
Diesel fuel additiveAntifreeze additive for
diesel, with protective
action for diesel engines.TUTELA DIESEL ART
Contractual Technical
Reference No. F601.L06To be mixed with diesel
(25 cc per 10 litres)
Washer fluid for
windscreen/rear
window/headlampsMixture of alcohol, water
and surfactants CUNA
NC 956-119.55522 or MS.90043TUTELA PROFESSIONAL
SC 35
Contractual Technical
Reference No. F201.D02To be used diluted or
undiluted in screen
washer/wiper systems
IMPORTANT
48)The use of products with different specifications than those indicated above could cause damage to the engine that is not covered by the
warranty.
174
TECHNICAL SPECIFICATIONS