lock Acura MDX 2007 User Guide

Push and pull the child seat
f orward and f rom side-to-side to
verify that it is secure enough to
stay upright during normal driving
maneuvers. If the child seat is not
secure, unlatch the belt, allow it to
retract f ully, then repeat these
steps.A child seat with a tether can be
installed in any seating position in
the second or third row.
To deactivate the lockable retractor
and remove a child seat, unlatch the
buckle, unroute the seat belt, and let
the belt fully retract. Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
Af ter conf irming that the belt is
locked, grab the shoulder part of
the belt near the buckle, and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child seat will not be secure.
To remove slack, it may help to
putweightonthechildseat,or
push on the back of the seat while
pulling up on the belt.
4. 5.
CONT INUED
Installing a Child Seat with a
Tether
Installing a Child Seat
Driver and Passenger Saf ety
51
——y
y
()-yy

This section gives inf ormation about
the controls and displays that
contribute to the daily operation of
your vehicle. All the essential
controls are within easy reach............................
Control Locations .62
............................
Instrument Panel .63
..........
Instrument Panel Indicators .64
.............................................
Gauges .72
.............
Multi-Inf ormation Display .73
Controls Near the Steering
.........................................
Wheel .115
Windshield Wipers and .................................
Washers .116
Rear Window Wiper and ...................................
Washer .117
.........
Turn Signal and Headlights . 118
...............
Hazard Warning Button . 122
...............
Rear Window Def ogger . 122
......
Instrument Panel Brightness . 123
......
Steering Wheel Adjustments . 124
.............................
Keys and Locks .126
......................
Immobilizer System .128
..............................
Ignition Switch .129
....................................
Door Locks .130
............
Childproof Door Locks . 131
..........................................
Tailgate .131
..........................
Power Tailgate .132
.....................
Remote Transmitter .135
...............................................
Seats .140
...................
Detachable Anchor . 144..................................
Seat Heaters .146
............................
Power Windows .147
.......................................
Moonroof .150
...............................
Parking Brake .151
...........................................
Mirrors .152
Driving Position Memory ........................................
System .155
...............................
Interior Lights .157
.........
Interior Convenience Items . 160
.....................
Beverage Holders .161
.............
Console Compartment . 162
..............
Storage Compartment . 162
..................................
Glove Box .162
....................
Sunglasses Holder .163
.............................
Cargo Hooks .163
...................................
Sun Visor .164
............................
Vanity Mirror .164
........
Accessory Power Sockets . 164
.......................
AC Power Outlet .165
Instruments and Controls
Inst rument s and Cont rols
61
——y
y
()-yy

Î
Î
Î Î
Î
: If equipped
Control Locations
62
HOOD RELEASE
HANDLE AUDIO
SYSTEM
GAUGES INSTRUMENT
PANEL
INDICATORS HomeLink
BUTTONS
AUTOMATIC
TRANSMISSION
HEADPHONE CONNECTORS
AUXILIARY INPUT JACKS
FUEL
FILL DOOR
RELEASE BUTTON
POWER
WINDOW
SWITCHES DRIVING POSITION
MEMORY SYSTEM
CLIMATE CONTROL
SYSTEM MIRROR
CONTROL
AUTO BUTTON
PARKING BRAKE
PEDAL REAR
CLIMATE
CONTROL SYSTEM
MOONROOF
SWITCH
POWER TAILGATE
BUTTON
POWER
DOOR LOCK
MASTER SWITCH
PARKING BRAKE
RELEASE HANDLE (P.155)
(P.130)
(P.151)
(P.147)
(P.317) (P.132)(P.319) (P.151) (P.263) (P.264)(P.173)(P.333) (P.178)
(P.168)
(P.153)
(P.150)
(P.272)
(P.63)
(P.72)
——y
y
()-yy

Î Î
Î
The U.S. instrument panel is shown. Differences for the Canadian models are noted in the text.
:
: If equipped
Instrument Panel
Instru me ntsand Cont ro ls
63
LOW TIRE PRESSURE
INDICATOR
CRUISE CONTROL
INDICATOR
ANTI-LOCK
BRAKE SYSTEM
INDICATOR SYSTEM
MESSAGE INDICATOR
HIGH BEAM INDICATOR MULTI-INFORMATION
DISPLAY
LOW OIL PRESSURE INDICATOR
VSA ACTIVATION INDICATOR
MALFUNCTION
INDICATOR
LAMP
A/T TEMPERATURE INDICATOR LIGHTS
ON INDICATOR
SEAT
BELT REMINDER INDICATOR
SUPPLEMENTAL RESTRAINT
SYSTEM INDICATOR
CHARGING SYSTEM INDICATOR
SECURITY SYSTEM INDICATOR
(P.65)
SIDE
AIRBAG OFF
INDICATOR
SH-AWD INDICATOR
IMMOBILIZER SYSTEM
INDICATOR
FOG LIGHT INDICATOR
ACTIVE
DAMPER SYSTEM
INDICATOR
PARKING BRAKE AND BRAKE SYSTEM INDICATOR
CRUISE
MAIN INDICATOR
(P.68)
(P.70)
(P.71)
(P.66)
(P.69) (P.69)
(P.65)
(P.68)
(P.65) (P.70) (P.67)(P.67)
(P.71)
(P.70)
(P.70)
LOW
FUEL
INDICATOR (P.71)(P.68)
(P.66)
(P.66)
(P.70)
(P.64)
(P.73)
VEHICLE STABILITY ASSIST (VSA) SYSTEM INDICATOR
(P.431)
——y
y
()-yy

This indicator comes on when you
turn the ignition switch to the ON
(II) position. If it comes on at any
other time, it indicates that the
passenger’s side airbag has
automati cally shut off. You will also
see a ‘‘P ASSENGER SIDE AIRBAG
OFF’’ message on the multi-
info rmation display (see page ).
For more information, see page .
This
indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates a
poten tial problem with your front
airbags. This indica tor will also alert
you to a poten tial problem with your
side airbags, passenger’s side airbag
automatic cutoff system, side curtain
airbags, or automa tic seat belt
tensioners. You will also see a
‘‘CHECK AIRBAG SYSTEM’’
message on the multi-information
display (see page ). For more
info rmation, see page . This
indicator normally comes on
for a few seconds when you turn
the ignition switch to the ON (II)
position. If this indicator comes on
at any other time, there is a
problem in the ABS. If this
happens, take the vehicle to your
dealer to have it checked. With
this indicator on, your vehicle still
has normal braking ability but no
an ti-lock function. You will also
see a ‘‘CHECK ABS SYSTEM’’
message on the multi-information
display (see page ). For more
inf ormation, see page .
81
33 81
33
81349
Supplemental Restraint
System Indicator
Side Airbag Of f Indicator Anti-lock Brake System
(A BS) Indicator
Instrument Panel Indicators
66
U.S. Canada
——y
y
()-y
y

This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the
or position. This indicator
will also come on when the light
switch is in AUTO and the lights
turn on automatically. If you turn the
ignition switch to the ACCESSORY
(I) or the LOCK (0) position without
turning off the light switch, this
indicator will remain on. A reminder
chime will also sound when you open
the driver’s door. This
indicator comes on when you
tu rn on the fog lights. For more
info rmation, see page .
This indicator comes on with the
high beam headlights. For more
info rmation, see page . This
indicator comes on when you
turn on the cruise control system by
pressing the CRUISE button (see
page ).
This indicator comes on when you
set the cruise control. See page
f or inf ormation on operating the
cruise control. 266
266
118
120
L ights On Indicator
Cruise Main Indicator
Fog L ight Indicator
High Beam Indicator
Cruise Control Indicator
Instrument Panel Indicators
70
——y
y
()-yy

When the main menu displays
‘‘Keyless Memory Settings ,’’ you
can customize some vehicle control
settings.
To enter the customizing mode,
press the SEL/RESET button. If
you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shift lever out
of Park, the display will change to
the normal screen.
You can customize some vehicle
control settings for ‘‘DRIVER 1’’ and
‘‘DRIVER 2’’ separate ly. If ‘‘DRIVER
1’’ or ‘‘DRIVER 2’’ is not displayed,
cu stomizing is not possible.
To have the driver’s ID detected,
make sure your remote transmitter
is linked to the system (see Keyless
Memory Settings on page ).If
you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on page .
Ref er to the table on the f ollowing
pages about the settings you want to
customize. If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button.
To change the settings, the ignition
switch must be in the ON (II)
position, and the vehicle must be
stopped with the transmission in
Park. 86
139TM
CONT INUED
Multi-Inf ormation Display
Customize Settings
Inst rument s and Cont rols
83
TM
—

—yy
()-yy

Î
Î
Î Î
Î
Î
Î
Î Î
Î
Menu Item Description
Group Setup Page Setting Option
INTERIOR LIGHT
DIMMING TIME
HEADLIGHT
AUTO OFF TIMER
AUTO LIGHT
SENSITIVITY
AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE
UNLOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK
TIMER
WIPER ACTION Changes
how long (in seconds) the interior lights
stay on after you close the doors and the tailgate.
Changes how long (in seconds) the exterior lights
stay on after you close the driver’s door.
Changes the timing of when the headlights come
on. The headlight switch needs to be in the AUTO
position.
Changes the setting of when to automatically lock
the doors.
Changes the setting of when to automatically
unlock the driver’s/all the doors.
Changes which doors unlock with the remote
transmitter in a first push.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also
sound when you press the LOCK button twice.
Changes how long it takes (in seconds) for the
doors to relock and the security system to set after
you unlock but do not open the door.
Changes the wiper operation between two settings
when the wiper switch is in the INT position.
Set/ Cancel all the customized settings as default.
LIGHTING
SETUP
(P.100)
DOOR/WINDOW
SETUP
(P.105)
WIPER SETUP
(P.113)
DEFAULT ALL
(P.86) 101
102
103
106
107
109
110
111
113
86
60 sec
30 sec
60 sec
30 sec
15 sec
MAX
HIGH
MID
SHIFT FROM P
WITH VEH SPD
OFF
IGN OFF
OFF
DRIVER DOOR
ALL DOORS
ON
OFF
90 sec
60 sec
30 sec
INTERMITTENT
WITH VEH SPD
SET
CANCEL 15 sec
0sec
LOW
MIN
: Default setting
SHIFT TO P DRIVER DOOR/ ALL DOORS
Multi-Inf ormation Display
Inst rument s and Cont rols
85
——y


y
()-yy

µ
µ
µ
µ ÛÝ
ÛÝ
Elapsed Time Reset
There are four elapsed time reset
choices you can make:
MANUAL ONLY You can reset
the elapsed time, when Trip
Computer’s Elapsed Time is
displayed (see page ).
IGN OFF The elapsed time is
reset when you turn the ignition
switch to the LOCK (0) position.
TRIP A The elapsed time is reset
when the Trip A is reset.
TRIP B The elapsed time is reset
when the Trip B is reset. You can choose this customize item
f rom ‘‘METER SETUP’’ by pressing
the INFO ( / ) button repeatedly.
Press the SEL/RESET button to see
the selections.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
79
Multi-Inf ormation Display
94
——y

y
()-yy

ÛÝÛÝ
CONT INUED
Auto Tilt & Telescope Steering Wheel
When ‘‘AUTO TILT & TELESCOPE
STEERING WHEEL’’ is set to ‘‘ON,’’
the steering wheel automatically
moves f ully in and up when you turn
the ignition switch to the LOCK (0)
position and remove the key.
You can choose this customize item
f rom ‘‘POSITION SETUP’’ by
pressing the INFO ( / ) button
repeatedly. Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button.
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
TILT & TELESCOPE STEERING
WHEEL’’ and repeat the procedure
again.
Multi-Inf ormation Display
Inst rument s and Cont rols
99
——y

y
()-y
y