Acura MDX 2015 Manual PDF
Page 71 of 505
70Instrument Panel
IndicatorsIndicator
Name
On/Blinking
Explanation
Message
Parking Brake 
and Brake 
System Indicator 
(Red)
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off if the parking brake 
has been released.●Comes on when the parking brake 
is applied, and goes off when it is 
released.●Comes on when the brake fluid 
level is low.●Comes on if there is a problem with 
the brake system.●The beeper sounds and the 
indicator comes on if you drive with 
the parking brake not fully released.
●Comes on while driving - Make sure the 
parking brake is released. Check the brake 
fluid level.
2 What to do when the indicator comes 
on while driving P. 472
●Comes on along with the ABS indicator  
- Have your vehicle checked by a dealer.
2 If the Brake System Indicator (Red) 
Comes On  P. 472
Brake System 
Indicator 
(Amber)
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on if there is a problem with 
a system related to braking other 
than the conventional brake 
system.
●Comes on while driving  - Have your 
vehicle checked by a dealer.●With this indicator on, your vehicle still has 
normal braking ability.
U.S.Canada(Red)U.S.Canada(Amber)
U.S.Canada 
Page 72 of 505
71
uuIndicators u
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Low Oil Pressure 
Indicator
●Comes on when you set the power 
mode to ON, and goes off when 
the engine starts.●Comes on when the engine oil 
pressure is low.
●Comes on while driving  - Immediately 
stop in a safe place.
2 If the Low Oil Pressure Indicator 
Comes On  P. 470
Malfunction 
Indicator Lamp
●Comes on when you set the power 
mode to ON, and goes off either 
when the engine starts or after 
several seconds if the engine did 
not start. If “readiness codes” have 
not been set, it blinks five times 
before it goes off.●Comes on if there is a problem with 
the emissions control systems.●Blinks when a misfire in the 
engine’s cylinders is detected.
●Readiness codes are part of the on board 
diagnostics for the emissions control 
systems.
2Testing of Readiness Codes P. 489
●Comes on while driving  - Have your 
vehicle checked by a dealer.●Blinks while driving  - Stop in a safe place 
where there are no flammable objects. 
Stop the engine for 10 minutes or more, 
and wait for it to cool down. Then, take 
your vehicle to a dealer.
2 If the Malfunction Indicator Lamp 
Comes On or Blinks  P. 471
Charging System 
Indicator
●Comes on when you set the power 
mode to ON, and goes off when 
the engine starts.●Comes on when the battery is not 
charging.
●Comes on while driving  - Turn off the 
climate control system and rear defogger in 
order to reduce electricity consumption.
2 If the Charging System Indicator 
Comes On  P. 470 
Page 73 of 505
72
uuIndicators u
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Shift Lever 
Position 
Indicator
●Indicates the current shift lever 
position.
2Shifting  P. 331
—
Transmission 
Indicator
●Blinks if the transmission system has 
a problem.
●Blinks while driving  - Avoid sudden 
starts and acceleration and have your 
vehicle checked by a dealer immediately.
M  (sequential 
shift mode) 
Indicator/Gear 
Position 
Indicator
●Comes on when the manual 
sequential shift mode is applied.
2 Sequential Shift Mode P. 333
— 
Page 74 of 505
73
uuIndicators u
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Seat Belt 
Reminder 
Indicator
●Comes on and the beeper sounds if 
you are not wearing a seat belt 
when you set the power mode to 
ON.●If the front passenger is not 
wearing a seat belt, the indicator 
comes on about a few seconds 
later.●Blinks while driving if either you or 
the front passenger has not 
fastened a seat belt. The beeper 
sounds and the indicator blinks at 
regular intervals.
●The beeper stops and the indicator goes off 
when you and the front passenger fasten 
their seat belts.●Stays on after you or the front 
passenger has fastened the seat belt  - 
A detection error may have occurred in the 
sensor. Have your vehicle checked by a 
dealer.
2 Seat Belt Reminder  P. 32
Low Fuel 
Indicator
●Comes on when the fuel reserve is 
running low (approximately 2.5 
U.S. gal./9.5 Liter left).●Blinks if there is a problem with the 
fuel gauge.
●Comes on - Refuel your vehicle as soon as 
possible.●Blinks  - Have your vehicle checked by a 
dealer. 
Page 75 of 505
74
uuIndicators u
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Anti-lock Brake 
System (ABS) 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●If it comes on at any other time, 
there is a problem with the ABS.
●Stays on constantly  - Have your vehicle 
checked by a dealer. With this indicator on, 
your vehicle still has normal braking ability 
but no anti-lock function.
2 Anti-lock Brake System (ABS)  P. 373
Supplemental 
Restraint System 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on if a problem with any of 
the following is detected:
-Supplemental restraint system
- Side airbag system
- Side curtain airbag system
- Seat belt tensioner
●Stays on constantly  or does not come 
on at all  - Have your vehicle checked by a 
dealer. 
Page 76 of 505
75
uuIndicators u
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Vehicle Stability 
Assist (VSA ®) 
System Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Blinks when VSA ®, or trailer stability 
assist is active.●Comes on if there is a problem with 
the VSA ®, hill start assist, trailer 
stability assist or brake lighting 
system.
●Stays on constantly  - Have your vehicle 
checked by a dealer.
2 Vehicle Stability Assist (VSA ®), aka 
Electronic Stability Control (ESC), 
System  P. 362
2 Trailer Stability Assist
* P. 319
2 Hill start assist system  P. 328
●When Trailer Stability Assist Problem  is 
displayed on the MID, the VSA ® does not 
activate.
VSA ® OFF 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on when you deactivate 
VSA ®.
2 VSA ® On and Off  P. 363
—
* Not available on all models 
Page 77 of 505
76
uuIndicators u
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Speed-sensitive 
Electric Power 
Steering (EPS) 
System Indicator
●Comes on when you set the power 
mode to ON, and goes off when 
the engine starts.●Comes on if there is a problem with 
the EPS system.
●Stays on constantly  or does not come 
on at all  - Have your vehicle checked by a 
dealer.
2 If the Speed-Sensitive Electric Power 
Steering (EPS) System Indicator 
Comes On  P. 472
Low Tire 
Pressure/TPMS 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON.●Comes on if the tire pressure of any 
of the tires becomes significantly 
low.●Blinks for about one minute, and 
then stays on if there is a problem 
with the TPMS, or when a compact 
spare tire
* is temporarily installed.
●Comes on while driving  - Stop in a safe 
place, check tire pressures, and inflate the 
tire(s) if necessary.●Blinks and remains on  - Have your 
vehicle checked by a dealer. If the vehicle is 
fitted with a compact spare, get your 
regular tire repaired or replaced and put 
back on your vehicle as soon as you can.
Turn Signal 
Indicators
●Blinks when you operate the turn 
signal lever.●Blinks along with all turn signals if 
you press the hazard warning 
button.
●Does not blink or blinks rapidly  - A turn 
signal light bulb has blown. Change the 
bulb immediately.
2 Front Turn Signal/Front Side Marker/
Parking Light Bulbs  P. 412
—
High Beam 
Indicator
●Comes on when the high beam 
headlights are on.
—
—
* Not available on all models 
Page 78 of 505
77
uuIndicators u
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Lights On 
Indicator
●Comes on whenever the light 
switch is on, or in  AUTO when the 
exterior lights are on.
●If you set the power mode to ACCESSORY 
or VEHICLE OFF (LOCK) while the lights are 
on, a chime sounds when the driver’s door 
is opened.
—
Immobilizer 
System Indicator
●Comes on briefly when you set the 
power mode to ON, then goes off.●Comes on if the immobilizer system 
cannot recognize the key 
information.
●Blinks  - You cannot start the engine. Set 
the power mode to VEHICLE OFF (LOCK), 
then select the ON mode again.●Repeatedly blinks - The system may be 
malfunctioning. Have your vehicle checked 
by a dealer.●Do not attempt to alter this system or add 
other devices to it. Electrical problems can 
occur.
— 
Page 79 of 505
78
uuIndicators u
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Security System 
Alarm Indicator
●Blinks when the security system 
alarm has been set.
2Security System Alarm P. 135
—
System Message 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on along with a beep when 
a problem is detected. A system 
message on the MID appears at the 
same time.
●While the indicator is on, roll the multi-
function steering wheel control to see the 
message again.●Refer to the Indicators information in this 
chapter when a system message appears 
on the MID. Take the appropriate action for 
the message.●The MID does not return to the normal 
screen unless the warning is canceled, or 
the multi-function steering-wheel controls 
is rolled.
—
CRUISE MAIN  
Indicator
*
●Comes on when you press the 
CRUISE  button.
2Cruise Control P. 336
—
CRUISE 
CONTROL  
Indicator
*
●Comes on when you have set a 
speed for cruise control.
2 Cruise Control P. 336
—
* Not available on all models 
Page 80 of 505
79
uuIndicators u
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
Keyless Access 
System Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on as soon as a problem is 
detected in the keyless access 
system or keyless starting system.
●Have your vehicle checked by a dealer.
Super Handling-
All Wheel 
Drive
TM (SH-
AWD ®) 
Indicator*
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.●Comes on if there is a problem with 
the SH-AWD ® system.●Blinks when the differential 
temperature is too high.
●Stays on constantly  - The engine drives 
the front wheels only in this state. Have 
your vehicle checked by a dealer.●Blinks while driving  - Stop in a safe 
place, shift to 
(P
, and idle the engine until 
the indicator goes off. If the indicator does 
not stop blinking, take your vehicle to a 
dealer.
2 Super Handling-All Wheel Drive
TM 
(SH-AWD® )
* P. 367
* Not available on all models