display Acura RDX 2008 Owner's Manual

µ
In MP3/WMA mode
This
f eature plays the f iles within a f older
in random order, rather than in the
order they are compressed in MP3/
WMA. To activate folder random
play, press the AUDIO button to
view the audio control display, then
push down the selector on the
interface dial. Rotate the interface
dial to select the f older random.
Press ENTER on the selector to
enter your selection.
You will see ‘‘FOLDER RANDOM’’
on the audio control display. To turn
of f this f eature, select the f older
random then, press ENTER again.You can play a DVD-A disc in the CD
changer. The disc controls are same
as previously described.
To pause a disc, press the preset
button which corresponds to the
current disc. To play the disc again,
press the preset button again.
You can also pause a disc on the
audio control display. Press the
AUDIO button to view the display,
select the corresponding number of
the current disc on the preset icons
by turning the interface knob, then
press ENTER on the interf ace
selector. To play the disc again,
select the preset icon, then press
ENTER again.
FOLDER RANDOM
Playing a DVD-A Disc
To Pause a Disc
Audio System
Features
209
FOLDER RANDOM INDICATOR
FOLDER RANDOM ICON
\f—\f—\f
y

\fy
() 
\fy\f
y
2008 RDX

If you turn the system of f while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition
switch, the disc will stay in the drive.
When you turn the system back on,
the CD will begin playing where it
left off.If you do not remove the disc f rom
the slot, the system will reload the
disc af ter 10 seconds and put the CD
changer in pause mode. To begin
playing the disc, press the DISC/
AUX button.
To remove a dif f erent CD f rom the
changer, select it with the
appropriate preset button, or icon on
the audio control display. When that
disc begins playing, press the eject
button.Press and hold the eject button until
you hear a beep to remove all the
discs from the changer.
You can also eject discs when the
ignition switch is of f by pressing the
eject button. The disc that was last
selected is ejected f irst. You can
eject the rest of the discs one at a
time.
For inf ormation on how to handle
and protect compact discs, see page
.
For inf ormation, see page .
For inf ormation, see page .
To take the system out of CD mode,
press the AM/FM, or DISC/AUX, or
button to switch to the radio,
or satellite radio, or auxiliary input
while a CD is playing. When you
return to CD mode by pressing the
DISC/AUX button, play will continue
at the same point that it left off. To remove the disc that is currently
playing, press and release the eject
( ) button. You will see
‘‘EJECT’’ on the upper display. When
you remove the disc f rom the slot,
the system begins the load sequence
so you can load another disc in that
position. If you do not load another
disc within 10 seconds, the system
selects the previous mode (AM, FM1,
FM2, or XM Radio).
223226217
To Stop Playing a Disc Removing CDs f rom the Changer
Protecting Discs
Adjusting the Sound
CD Changer Error Messages
Audio System
210
\f—\f—\f
y
y
() 
\fy\f
y
2008 RDX

µµ
XM Satellite Radio receives signals
f rom two satellites to produce clear,
high-quality digital reception. It
of f ers many channels in several
categories. Along with a large
selection of dif f erent types of music,
XM Satellite Radio also allows you to
view channel and category selections
in the upper display and the audio
control display. To listen to the XM satellite Radio,
turn the ignition switch to the
ACCESSORY (I) or ON (II) position.
Push the PWR/VOL knob to turn on
the audio system, and press the
button. To view the audio
control display, press the AUDIO
button. Adjust the volume turning
the PWR/VOL knob. The last
channel you listened to will show on
the upper display.
Each time you press and
release the DISP/MODE button, the
upper display changes in the
f ollowing sequence: Channel name,
category, artist name, and music title. To switch between the
category mode and channel mode,
press and hold the DISP/MODE
button until the mode changes.
appears ‘‘CH’’ or ‘‘CAT’’ mode
indicator appears on the upper
display.
Your vehicle is capable of receiving
XM
Satellite Radio anywhere in the
United States, and Canada, except
Hawaii and Alaska. XM
is a
registered trade mark of XM
Satellite Radio, Inc.
CONT INUED
Audio System
Operating the XM Radio
DISP MODE
Features
213
\f—\f—\f
y
y
() 
\fy\f
y
2008 RDX

µ
µ You can also change channel
selections on the audio control
display. Press the AUDIO button to
view the display, then push down the
selector on the interf ace dial. Rotate
the interf ace dial to select the tune.
Press ENTER on the selector to
enter your selection. Rotate the
interf ace knob to the desired
channel. In the category mode, you
can only select channels within that
category. Press either side of the SEEK/SKIP
(CATEGORY) bar ( or )
to select another category.
You can also change the category on
the audio control display. Press the
AUDIO button to view the display,
then push the selector on the
interf ace dial to the right side or lef t
side to select another category.
When in the satellite radio mode,
you can use any of f our methods to
f ind channels: TUNE, SEEK/SKIP
(CATEGORY), SCAN, and the
preset icons.
You can also switch between the
category mode and channel mode,
on the audio control display. Press
the AUDIO button to view the
display, then push down the selector
on the interf ace dial. Rotate the
interf ace dial to select the mode.
Press ENTER on the selector to
enter your selection.
Press the TUNE/
FOLDER bar to change channel
selections. Press the side of the
bar to tune to higher numbered
channels, and the side of the
bar to tune to lower numbered
channels. In the category mode, you
can only select channels within that
category.
Audio System
SEEK /SK IP (CA T EGORY)
T o Select a Channel
TUNE
214
TUNE ICON SEEK/SKIP (CATEGORY) ICON
\f—\f—\f
y
y
() 
\fy\f
y
2008 RDX

µµ
The scan f unction gives
you a sampling of all channels while
in the channel mode. In the category
mode, only the channels within that
category are scanned. To activate
scan, press the SCAN button. The
system plays each channel in
numerical order f or a f ew seconds,
then selects the next channel. When
you hear a channel you want to
continue listening to, press the
button again. Youcanstoreupto12
preset channels using the preset
buttons/icons. Each button/icon
stores one channel f rom the XM1
band and one channel f rom the XM2
band.
To store a channel:
You can also scan the channels on
the audio control display. Press the
AUDIO button to view the display,
then push down the selector on the
interf ace dial. Push the selector to
the right to activate scan feature. In category mode, only channels within that category can be selected.
In channel mode, all channels can be
selected.Usethetune,seek,orscan
function to tune to a desired
channel.
Press the button. To view
the audio control display, press the
AUDIO button. Either XM1 or XM
2 will be shown on the display.
1.
2.
CONT INUED
Audio System
SCAN
Preset
Features
215
SCAN ICON
SCAN INDICATOR
\f—\f—\f
y
\f
y
() 
\fy\f\fy
2008 RDX

CONT INUED
BASS, TREBLE, BALANCE, and
FADER are each adjustable. You can
also adjust the strength of the sound
coming from the center and
subwoof er speakers. In addition, you
can set the Dolby PL (ProLogic) II
and Speed-sensitive volume
compensation (SVC).
To adjust each mode, press the
AUDIO button to view the audio
control display, push the interf ace
selector down, and turn the interf ace
dial to SOUND. Then press ENTER
on the selector.
Selectthemodeyouwanttoadjust
by pushing the interf ace selector up
or down, or by turning the interf ace
dial.
On RDX with Technology Packagemodel
Audio System
Adjusting the Sound
Features
217
SOUND ICON
\f—\f—\f
y

y
() 
\fy\fy
2008 RDX

µ
µ´
The current setting is also shown on
the upper display.
The system will automatically return
the display to the selected audio
mode about 5 seconds af ter you stop
adjusting a mode.
To adjust bass
and treble, select BASS or TREBLE,
andpressENTERontheinterface
selector. The current setting is
shown on the audio control display.
Turn the interface dial to the desired
level ( 6 to 6), and enter your
selection by pressing ENTER.
BASS/TREBL E
Audio System
218
CURRENT SETTING
CURRENT SETTING
\f—\f—\f
y
y
() 
\fy\fy
2008 RDX

µµµ
´
µ µ
These
modes adjust the strength of the
sound coming f rom each speaker.
Fader adjusts the f ront-to-back
strength, while balance adjusts the
side-to-side strength. To adjust f ader
and balance, select FADER or
BALANCE, then press ENTER on
the interf ace selector. The current
setting is shown on the audio control
display. Turn the interf ace dial to the
desired level (f ader: F9 to R9,
balance: L9 to R9), and enter your
selection by pressing ENTER. To
equalize the f ader or balance, turn
the interf ace dial until the readings
on the sound grid come to the center
of the adjustment bar. To
adjust the strength of the sound
f rom the center or subwoof er
speaker, select it and press ENTER
on the interf ace selector. Turn the
interf ace dial to the desired level (
6 to 6), and enter your selection by
pressing ENTER. The current
setting is shown on the audio control
display. Even if the adjustment level
reaches 6, the sub woof er is not
turned off.
Dolby PL
(Prologic) II signal processing
creates multi-channel surround
sound f rom the audio signal
recorded with 2ch stereo sources.
Dolby prologic II can only activate
when listening to CD (CD-DA, MP3/
WMA),XMradio,andAUX.Whenit
activates, ‘‘DPL II’’ is shown on the
upper display. To set this f eature on or of f , select
Dolby PL II, and press ENTER on
the interf ace selector. Rotate the
interf ace dial to ON or OFF, and
press ENTER.
Manuf actured under license f rom
Dolby Laboratories. ‘‘Dolby’’,
‘‘ProLogic’’, and the double-D symbol
are trademarks of Dolby
Laboratories.
CONT INUED
Audio System
FADER/BAL ANCE CENTER/SUBWOOFER
Dolby PL (Prologic) II
Features
219
\f—\f—\f
y
y
() 
\fy\fy
2008 RDX

The radio can receive the complete
AM and FM bands.
Those bands cover these f requen-
cies:
AM band: 530 to 1,710 kHz
FM band: 87.7 to 107.9 MHzHow well the radio receives stations
is dependent on many f actors, such
as the distance from the station’s
transmitter, nearby large objects,
and atmospheric conditions.
Driving very near the transmitter of
a station that is broadcasting on a
f requency close to the f requency of
the station you are listening to can
also af f ect your radio’s reception.
You may temporarily hear both
stations,orhearonlythestationyou
are close to.
A radio station’s signal gets weaker
as you get f arther away f rom its
transmitter. If you are listening to an
AM station, you will notice the sound
volume becoming weaker, and the
stationdriftinginandout.If youare
listening to an FM station, you will
see the stereo indicator f lickering of f
and on as the signal weakens.
Eventually, the stereo indicator will
go of f and the sound will f ade
completely as you get out of range of
the station’s signal.
Radio stations on the AM band are
assigned f requencies at least 10 kHz
apart (530, 540, 550). Stations on the
FM band are assigned f requencies at
least 0.2 MHz apart (87.9, 88.1, 88.3).
Stations must use these exact
f requencies. It is f airly common f or
stations to round of f the f requency in
their advertising, so your radio could
display a f requency of 100.9 even
though the announcer may identif y
the station as ‘‘FM101.’’
CONT INUED
Radio Frequencies Radio Reception
Radio Reception
Features
221
\f—\f—\f
y
y
() 
\fy\fy
2008 RDX

If you see an error message in the
display while playing a CD, f ind the
cause in the chart to the right. If you
cannot clear the error message, take
the vehicle to your dealer.Error
Message Solution
Cause
Press the EJECT button, and pull out the disc.
Check if it is inserted correctly in the disc
changer.
Make sure the disc is not scratched or damaged.
For more information, see page224.
Press the EJECT button, and pull out the disc.
Check the disc for damage or deformation.
For more information, see page224.
If the disc cannot be pulled out, or the error
message does not disappear after the disc is
ejected, see your dealer.
Will disappear when the temperature returns to
normal.
Press the EJECT button, and pull out the disc.
Check if it is playable disc in the CD changer
(see page198).
Press the EJECT button, and pull out the disc.
Check the disc for damage or deformation.
For more information, see page224.
If the disc cannot be pulled out, or the error
message does not disappear after the disc is
ejected, see your dealer.
FOCUS Error
Mechanical Error
High Temperature
Check Disc
Check Disc and Changer
Error
CD Changer Error Messages
226
\f—\f—\f
y
\f\fy
() 
\fy\f
y
2008 RDX