bluetooth Acura RDX 2013 User Guide

198
uuBluetooth® HandsFreeLink ®u HFL Menus
Features
HFL MenusThe power mode must be in ACCESSORY or ON to use HFL.
PHONE or
*1: Appears only when a phone is connected to HFL.
1 HFL Menus
To use HFL, you must first pair your Bluetooth-
compatible cell phone to the system while the vehicle
is parked.
Some functions are limited while driving. A message
appears on the screen when the vehicle is moving
and the operation is canceled.
PHONE
Speed Dial
*1
Call History
*1
Dialed Calls
Dial
*1
Phonebook
*1
Received CallsMissed Calls
Display your speed dial entry lists.
(up to 15 entries per paired phone)
Display the paired phone’s phonebook.
Enter a phone number to dial. Display the last 20
outgoing calls.
Display the last 20
incoming calls.
Display the last 20
missed calls.

199
uuBluetooth ® HandsFreeLink ®u HFL Menus
Continued
Features
*1: Appears only when a phone is connected to HFL.
Redial
Text Message
Message is read aloud
Redial the last number dialed in the phone's history.
Read/Stop reading
ReplyCall
Display Message
System reads received message
aloud, or stop message from being
read.
Reply to a received message using
one of six fixed phrases.
Make a call to the sender.
See an entire received message
(if more than three lines of text).
Select message and .

200
uuBluetooth® HandsFreeLink ®u HFL Menus
Features
Phone Setup
Connection
Add a New PhoneConnect a PhoneDisconnect PhoneDelete a Phone
Pair a phone to the system.
Connect a phone to the system.
Disconnect a paired phone from
the system.
Delete a previously paired phone.
Pairing CodeCreate a code for a paired phone.

201
uuBluetooth ® HandsFreeLink ®u HFL Menus
Continued
Features
*1: Appears only when a phone is connected to HFL.
Speed Dial
*1
PhonebookCall HistoryPhone NumberChange Speed Dial
Select a phone number from the
phonebook to store as a speed dial
number.
Select a phone number from the call
history to store as a speed dial
number.
Enter a phone number to store as
a speed dial number.
Change a previously stored speed
dial number.
Delete Speed DialDelete a previously stored speed dial
number.
Store Voice Tag
Change Voice Tag
Create a voice tag for a speed dial
number.
Change a voice tag for a speed dial
number.
Delete Voice TagDelete a voice tag for a speed dial
number.
Add New
Existing entry list

202
uuBluetooth® HandsFreeLink ®u HFL Menus
Features
*1: Appears only when a phone is connected to HFL.
Auto Transfer
Name PriorityNumber Priority
Prioritize the caller’s name as the
caller ID.
Prioritize the caller’s phone number
as the caller ID.
Caller ID Info
Passcode
*1
Text Message Notice
System Clear
Set calls to automatically transfer from your phone to HFL when you
enter the vehicle.
Clear the system of all paired phones, phonebook entries, and
security codes.Turn incoming text message notifications on or off.
Create a security PIN for a paired phone.

Continued
203
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■
To pair a cell phone (when there is no
phone paired to the system)
1. Press the PHONE button or the button.
2. Rotate to select Yes, then press .
3. Make sure your phone is in search or
discoverable mode, then press .
u HFL automatically searches for a
Bluetooth device.
4. When your phone appears on the list, select
it by pressing .
u If your phone doesn’t appear, select
Phone Not Found? and search for
Bluetooth devices using your phone.
From your phone, select
HandsFreeLink .
5. HFL gives you a four-digit pairing code to
input on your phone.
When your phone prompts you, input the
four-digit pairing code.
6. You will receive a notification on the screen
if pairing is successful.
■
Phone Setup
1Phone Setup
Your Bluetooth -compatible phone must be paired to
HFL before you can make and receive hands-free
calls.
Phone Pairing Tips:•You cannot pair your phone while the vehicle is
moving.•Up to six phones can be paired.•Your phone's battery may drain faster when it is
paired to HFL.•If your phone is not ready for pairing or not found
by the system within three minutes, the system will
time out and returns to idle.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following: : The phone can be used with HFL.
: The phone is compatible with Bluetooth® Audio.

204
uuBluetooth® HandsFreeLink ®u HFL Menus
Features
■
To pair a cell phone (when a phone has
already been paired to the system)
1. Press the PHONE button or the button.
u If a prompt appears asking to connect to
a phone, select No and proceed with
step 2.
2. Rotate to select Phone Setup, then
press .
3. Rotate to select Connection, then press
.
4. Rotate to select Add a New Phone,
then press .
u The screen changes to Select Location.
5. Rotate to select Empty, then press .

205
uuBluetooth ® HandsFreeLink ®u HFL Menus
Continued
Features
6. Make sure your phone is in search or
discoverable mode, then press .
u HFL automatically searches for a
Bluetooth device.
7. When your phone appears on the list, select
it by pressing .
u If your phone doesn’t appear, select
Phone Not Found? and search for
Bluetooth devices using your phone.
From your phone, select
HandsFreeLink .
8. HFL gives you a four-digit pairing code to
input on your phone.
When your phone prompts you, input the
four-digit pairing code.
9. You will receive a notification on the screen
if pairing is successful.

uuBluetooth® HandsFreeLink ®u HFL Menus
206Features
■
To change the pairing code setting
1. Press the PHONE button or the button.
2. Rotate to select Phone Setup, then
press .
3. Rotate to select Connection, then press
.
4. Rotate to select Pairing Code, then
press .
5. Rotate to select Fixed or Random , then
press .
1 To change the pairing code setting
The default pairing code is “0000” until you change
the setting.
To create your own, select Fixed, and delete the
current code, then enter a new one.
For a randomly generated pairing code each time you
pair a phone, select Random.

207
uuBluetooth ® HandsFreeLink ®u HFL Menus
Continued
Features
■
To delete a paired phone
1. Press the PHONE button or the button.
2. Rotate to select Phone Setup, then
press .
u Repeat the procedure to select
Connection , then Delete a Phone .
3. Rotate to select a phone you want to
delete, then press .
4. You will receive a confirmation message on
the screen. Rotate to select Yes, then
press .
u You will receive a notification on the
screen if it is successful.