ignition Acura RL 2005 Owner's Guide

Û
Ý
ÛÝ
Each time you press the INFO ( / ) button, the display changes as
shown in the illustration. Select
which of these customize groups you
want to change:
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE ENTRY screen is
shown again. WIPER SET UP DOOR/WINDOW SET UP
LIGHTING SET UP
KEYLESS ACCESS SET UP
POSITION SET UP
METER SET UP
With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Multi-Inf ormation Display
Selecting a Customize Group
Inst rument s and Cont rols
81
Press the or button.
Press the SEL/RESET button. TO METER
SET UP
seepage82
TO POSITION
SET UP
seepage85
TO KEYLESS
ACCESS SET UP
seepage88
TO LIGHTING
SET UP
seepage91
TO DOOR/
WINDOW SET UP
seepage94
TO WIPER
SET UP
seepage99

Û
Ý
ÛÝ
Each time you press the INFO ( / ) button, the display changes as
shown in the illustration.
Here are the settings you can
customize in this mode: LANGUAGE SELECTION
ADJUST OUTSIDE TEMP.
DISPLAY
TRIP A & AVG. FUEL A RESET
with REFUEL
If you select EXIT by pressing the
SEL/RESET button, the
CUSTOMIZE ENTRY screen is
shown again. With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Select METER SET UP, and press
the SEL/RESET button.
Multi-Inf ormation Display
Meter Setup
82
Press the or button.
Press the SEL/RESET button.

Û
Ý
ÛÝ
With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Select POSITION SET UP, and press
the SEL/RESET button.
Each time you press the INFO ( / ) button, the display changes as
shown in the illustration.
If you select EXIT by pressing the
SEL/RESET button, the
CUSTOMIZE ENTRY screen is
shown again. AUTO TILT & TELESCOPIC MEMORY POSITION LINK
Here are the settings you can
customize in this mode:
CONT INUED
Position Setup
Multi-Inf ormation Display
Inst rument s and Cont rols
85
Press the or button.
Press the SEL/RESET button.

Û
ÝMemory Position Link Auto Tilt & TelescopicSelect ON or OFF by pressing the
or button, and enter your
selection by pressing the SEL/
RESET button.
When you turn the ignition switch to
LOCK (0) and release it, or remove
the built-in key f rom the ignition
switch, the steering wheel
automatically moves f ully in and up.
You can turn this feature on or off.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
When you unlock the doors by
pressing the button on the remote or
by grabbing the driver’s door handle
while carrying the remote, the
driver’s ID (Driver 1 or Driver 2) is
recognized, and the driver’s seat, the
steering wheel, and the outside
mirror positions move to their
memorized positions.
You can turn this feature on or off. The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
Multi-Inf ormation Display
86

Û
Ý
ÛÝ
Each time you press the INFO ( / ) button, the display changes as
shown in the illustration.
Here are the settings you can
customize in this mode: DOOR UNLOCK MODE
KEYLESS ACCESS
LIGHT FLASH
KEYLESS ACCESS BEEP
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again. With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Select KEYLESS ACCESS SETUP,
and press the SEL/RESET button.
Multi-Inf ormation Display
K EYL ESS A CCESS Setup
88
Press the or button.
Press the SEL/RESET button.

ÛÝ
ÛÝ
Each time you press the or
button, the screen changes as shown
in the illustration.
Here are the settings you can
customize in this mode:INTERIOR LIGHT
DIMMING TIME
HEADLIGHT AUTO OFF TIMER
AUTO LIGHT SENSITIVITY
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again. With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Select LIGHTING SETUP, and press
the SEL/RESET button.
CONT INUED
Lighting Setup
Multi-Inf ormation Display
Inst rument s and Cont rols
91
Press the or button.
Press the SEL/RESET button.

Û
Ý
With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button. Select DOOR/WINDOW SET UP,
and press the SEL/RESET button.
Each time you press the INFO ( /
) button, the display changes as
shown in the illustration.
Here are the settings you can
customize in this mode:
DOOR LOCK MODE AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEYLESS LOCK
ACKNOWLEDGEMENT
SECURITY RELOCK TIMER If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again.
Door/Window Setup
Multi-Inf ormation Display
94

µ
µ
ÛÝ µ
µ ÛÝ
Auto Door Unlock
You can select f rom three possible
settings f or auto door unlock:
SHIFT TO P The driver’s door or
all the doors, depending on your
selection in DOOR LOCK MODE
(see page ), unlock whenever
you move the shif t lever to Park.
OFF
The auto door lock is deactivated all
the time.
Select the desired condition by
pressing the or button, and
enter your selection by pressing the
SEL/RESET button.
The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
IGN OFF The driver’s door or all
doors, depending on your selection
in DOOR LOCK MODE (see page
), unlock when you turn the
ignition switch to LOCK (0).
OFF The auto door unlock is
deactivated all the time.
Select the desired setting by
pressing the or button, and
enter your selection by pressing the
SEL/RESET button.
The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
97 97
Multi-Inf ormation Display
96

Û
Ý
ÛÝ
With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again. You can customize the WIPER
ACTION in this mode. Each time you press the INFO ( / ) button, the display changes as
shown in the illustration.
Select WIPER SET UP, and press
the SEL/RESET button.
CONT INUED
Multi-Inf ormation Display
Wiper Setup
Inst rument s and Cont rols
99
Press the or button.
Press the SEL/RESET button.

µ
µ µPush down on the
lef t lever to signal a lef t turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.
Turn signal
Of f
Parking and indicator lights
AUTO
Headlights on
High beams
Flashhighbeams
Fog lights of f
Fog lights on The rotating switch
on the lef t lever controls the lights.
Turning this switch to the ‘‘ ’’
position turns on the parking lights,
taillights, instrument panel lights,
side-marker lights, and rear license
plate lights.
Turning the switch to the ‘‘ ’’
position turns on the headlights. If
you leave the lights on with the
ignition switch released af ter turned
to the LOCK (0) position or when
the built-in key is removed f rom the
ignition switch, you will hear a
reminder chime when you open the
driver’s door. When the light switch is in the
‘‘ ’’ or ‘‘ ’’ position, the
lights on indicator comes on as a
reminder. This indicator stays on if
you leave the light switch on and
turn the ignition switch to the
ACCESSORY (I) or LOCK (0)
position.
To switch f rom low
beams to high beams, push the lef t
lever f orward until you hear a click.
The blue high beam indicator will
come on (see page ). Pull it back
to return to low beams. To flash the
high beams, pull the lever back
lightly, then release it. The high
beamsstayonaslongasyouhold
the lever back.
1.
2.
3.
4.
5.
6.
7.
8.
9. 64
Turn Signal
Headlights
High Beams
Turn Signal, Headlights
104