display ACURA RL 2012 Owner's Guide

Page 91 of 562

ÛÝ
ÛÝ UsetheINFO( / )buttononthe
steering wheel to select the settings
and the SEL/RESET button to enter
your selections. If you want the settings as they were
when the vehicle lef t the f actory,
select DEFAULT ALL, as described
on this page.
If you want to set the def ault settings,
press the INFO ( / ) button to
select DEFAULT ALL, then press
the SEL/RESET button.If you want to cancel DEFAULT
ALL, select CANCEL, then press the
SEL/RESET button. The screen
goes back to CUSTOMIZE ENTRY. If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button.
CONT INUED
DEFA UL T A L L
Multi-Inf ormation Display
Inst rument s and Cont rols
85
11/07/20 18:11:17 31SJA670_090
ProCarManuals.com

Page 92 of 562

To set the def ault settings again,
select DEFAULT ALL, and press the
SEL/RESET button. Then select
SET, and press the SEL/RESET
button.When DEFAULT ALL is set, you will
see the above display for several
seconds, then the screen returns to
CUSTOMIZE ENTRY.If DEFAULT ALL is not set, you will
see the above display for several
seconds, then the screen goes back
to the normal message mode. Repeat
the procedure to select DEFAULT
ALL.
Multi-Inf ormation Display
86
11/07/20 18:11:23 31SJA670_091
ProCarManuals.com

Page 93 of 562



ÛÝ Î
ÎYou can customize some of the
vehicle control settings to your
pref erence. Here are the settings
you can customize:METER SETUP
POSITION SETUP
WIPER SETUP DOOR/WINDOW SETUP
LIGHTING SETUP
KEYLESS ACCESS SETUPWhile CHG SETTING in the
CUSTOMIZE ENTRY is shown on
the multi-information display, press
the SEL/RESET button. The screen
changes to ACC SETUP in the
CUSTOMIZE GROUP.
Each time you press the INFO ( /
) button, the screen changes as
shownonthenextpage.Pressthe
INFO ( / ) button until you see
the setup you want to customize,
then press the SEL/RESET button
to enter your selection. ADAPTIVE CRUISE CONTROL
(ACC) SETUP
On models with adaptive cruise
control (ACC) :
CONT INUED
Multi-Inf ormation Display
CHG SETTING
Inst rument s and Cont rols
87
11/07/20 18:11:32 31SJA670_092
ProCarManuals.com

Page 94 of 562

ÛÝ


Multi-Inf ormation Display
88
Press the or button.
Press the SEL/RESET button.
: If equippedADAPTIVE CRUISE
CONTROL SETUP
seepage89
METER SETUP
seepage94
POSITION SETUP
seepage103
KEYLESS
ACCESS SETUP
seepage108
LIGHTING SETUP
seepage115
DOOR/WINDOW
SETUP
seepage122
seepage133 WIPER SETUP
11/07/20 18:11:39 31SJA670_093
ProCarManuals.com

Page 95 of 562

ÛÝ


ÛÝ
ÛÝ
If equipped
Here are the two custom settings for
adaptive cruise control (ACC):
PRE-RUNNING CAR DETECT
BEEP
ACC DISPLAY SPEED UNIT
While the multi-information display
is in the CUSTOMIZE GROUP
screen, select ACC SETUP by
pressing the INFO ( / ) button,
then press the SEL/RESET button.
Each time you press the INFO ( /
) button, the display changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
CONT INUED
A daptive Cruise Control Setup
Multi-Inf ormation Display
Inst rument s and Cont rols
89
seepage90
seepage92
Press the SEL/RESET button. Press the or button.
11/07/20 18:11:48 31SJA670_094
ProCarManuals.com

Page 96 of 562

ÛÝ While the multi-information display
is in the ACC SETUP of the
CUSTOMIZE GROUP, press the
SEL/RESET button. The screen
changes to the above display.Press the SEL/RESET button. The
screen changes as shown above.
Select ON or OFF by pressing the
INFO ( / ) button, then press the
SEL/RESET button to enter your
selection. When PRE-RUNNING CAR
DETECT BEEP is set to ON, one
beep sounds when the ACC detects a
vehicle in f ront of you. You also hear
a beep when that vehicle goes out of
the range of your vehicle’s radar
sensor.
Pre-Running Car Det ect Beep
Multi-Inf ormation Display
90
11/07/20 18:11:54 31SJA670_095
ProCarManuals.com

Page 97 of 562

ÛÝ When your choice is set, the display
changes to the screen shown above
f or several seconds, and then goes
back to CUSTOMIZE ENTRY.To exit PRE-RUNNING CAR
DETECT BEEP without changing
the current setting, select EXIT by
pressing the INFO ( / ) button,
then press the SEL/RESET button.
The screen goes back to
CUSTOMIZE MENU. If you choice is not set, you will see
the above display f or several seconds,
then the screen goes back to
CUSTOMIZE SETUP. If this
happens, you need to repeat the pre-
running car detect beep setup.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
91
11/07/20 18:11:59 31SJA670_096
ProCarManuals.com

Page 98 of 562

ÛÝÛÝ While the multi-information display
is in the ACC SETUP of the
CUSTOMIZE GROUP, press the
SEL/RESET button. The screen
changes to CUSTOMIZE MENU.
Press the INFO ( / ) button until
you see the above display.Press the SEL/RESET button. The
screen changes as shown above. The
highlighted unit, mph or km/h, is
the current setting. To change the
setting, press the INFO ( / )
button until the unit you want is
highlighted, then press the SEL/
RESET button. To change the unit of measurement
f rom mph to km/h, do this:
A dapt ive Cruise Cont rol Display
Speed Unit
Multi-Inf ormation Display
92
11/07/20 18:12:05 31SJA670_097
ProCarManuals.com

Page 99 of 562

ÛÝ When your choice is set, you will see
the above display f or several seconds,
then the screen goes back to
CUSTOMIZE ENTRY.To exit ACC DISPLAY SPEED
UNIT without changing the current
setting, select EXIT by pressing the
INFO ( / ) button, then press the
SEL/RESET button. The screen
goes back to CUSTOMIZE MENU. If your choice is not set, you will see
the above display f or several seconds,
then the screen goes back to
CUSTOMIZE SETUP. If this
happens, you need to repeat the ACC
display speed unit setup.
Multi-Inf ormation Display
Inst rument s and Cont rols
93
11/07/20 18:12:10 31SJA670_098
ProCarManuals.com

Page 100 of 562



ÛÝ
ÛÝ
LANGUAGE SELECTION
ADJUST OUTSIDE TEMP.
DISPLAY Here are the f our custom settings
forthemetersetup:
TRIP A RESET with REFUEL
ELAPSED TIME RESET
While METER SETUP is shown in
the CUSTOMIZE GROUP of the
multi-inf ormation display, press the
SEL/RESET button.
Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection. Meter Setup
Multi-Inf ormation Display
94
seepage97
seepage99
seepage101seepage95
Press the or button.
Press the SEL/RESET button.
11/07/20 18:12:19 31SJA670_099
ProCarManuals.com

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 61-70 71-80 ... 260 next >