keyless Acura TL 2009 Owner's Guide

Page 80 of 648




CONT INUED
You can select the displayed
language and also customize some
vehicle control settings to your liking
with the multi-information display
and the three buttons on the steering
wheel (see page ).
When you unlock and open the
driver’s door, the display shows
‘‘DRIVER 1’’ or ‘‘DRIVER 2’’
depending on which remote
transmitter/keyless access remoteyou use, and the driver’s seat and the
outside mirrors move to the position
stored in that remote transmitter/
keyless access remote (see page
).
The driver’s ID (1 or 2) is displayed
when the power mode is set to ON.
The multi-inf ormation display in the
instrument panel displays various
inf ormation and messages when the
ignition switch is in the ON (II)
position. Some of the messages help
you operate your vehicle more
comf ortably. Others help to keep
you aware of the periodic
maintenance your vehicle needs f or
continued trouble-f ree driving.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more inf ormation, see pagesand .
There are three types of messages:
normal display messages, engine oil
lif e and maintenance messages, and
system messages. 78
164
: 180
178
On models with keyless access system
Multi-Inf ormation Display
Normal Display Messages
Inst rument s and Cont rols
77
Remote transmitter/keyless
access remote 1 is used.
Remote transmitter/keyless
access remote 2 is used.
 —
—y
y
)   y  y
2009 TL

Page 81 of 648

ÎÎ
ÎÛÝ

ÛÝ
These messages go of f several
seconds af ter the key is inserted into
the ignition switch. These messages go of f in about
several seconds.
If you do not f asten your seat belt,
you will also see a ‘‘FASTEN SEAT
BELT’’ message on the multi-
inf ormation display when you turn
the ignition switch to the ON (II)
position. With the ignition switch in the ON
(II) position, the multi-inf ormation
display changes as shown on page
each time you press the INFO
( / ) button or the SEL/RESET
button.
When you turn the ignition switch
to the ON (II) position, your last
selection is displayed.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more inf ormation, see pages
and .
80
:
178180
On models with keyless access system
Multi-Inf ormation Display
78
SEL/RESET BUTTON
INFO BUTTONS ( / )
\f—
—y
y
) \f\fy\f\fy
2009 TL

Page 82 of 648



CONT INUED
In the multi-information display, the
system message is also displayed
(see page ) and you can
customize your vehicle control
settings (see page ).In the normal display mode, the
upper segment displays trip
computer inf ormation, such as f uel
economy or average speed. The
lower segment displays the
odometer/trip meter (A/B), outside
temperature, and engine oil lif e and
maintenance item code(s).
The multi-inf ormation display
consists of an upper segment and a
lower segment. You will see some keyless access
system messages until you select the
ON mode by operating the engine
start/stop button. These messages
canbecustomized(seepage ).
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more inf ormation, see pages
and . 87
91
105
:
180
178
On models with keyless access system
Multi-Inf ormation Display
Inst rument s and Cont rols
79
LOWER
SEGMENT
UPPER
SEGMENT
U.S. model is shown.
 —
—y
 y
)   y  y
2009 TL

Page 83 of 648

ÛÝ




Multi-Inf ormation Display
80
U.S. model is shown. : Press the INFO button ( / ).
: Press the SEL/RESET button.
1:
2 : SH-AWD models only Odometer (See page81.)
Trip Meter (See page81.)
Trip Computer (See page82.) Engine Oil Life
(See page84.)
SH-AWD Torque Distribution Monitor
(See page86.)
Tire Pressure for each tire (See page85.)
HFL (See page86.) On models without navigation system only
This display will be shown when the
BluetoothHandsFreeLinkis activated.
Keyless Memory Settings (See page91.) Outside Temperature (See page84.)
2
1 TM
\f—\f—y
y
) \f\fy\f\fy
2009 TL

Page 86 of 648



This shows the average speed you
are traveling in miles per hour (mph)
forU.S.modelsorkilometersper
hour (km/h) f or Canadian models.
When you turn of f the engine, INST.
MPG or INST. L/100 km is also
reset.
This shows the estimated distance
you can travel on the fuel remaining
in the f uel tank. This distance is
estimated f rom the f uel economy
you received over the last several
miles(U.S.) or kilometers (Canada),
so it will vary with changes in speed,
traf f ic, etc.
This shows your current f uel
economy.
This shows the time passed traveled
since you last reset it. When you turn
the ignition switch to the ON (II)
position, ELAPSED TIME A or B is
reset.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more inf ormation, see pagesand .
:
180
178
INST . MPG (U.S. models)/INST . L /
100 km (Canadian models)
RANGE
A VG. SPEED A /B
EL A PSED T IME A /B
Multi-Inf ormation Display
Inst rument s and Cont rols
83
\f—
—y

y
) \f\fy\f\fy
2009 TL

Page 92 of 648


CONT INUED
See page527
See page 528
See page 528
See page 529
See page 529 See page
73 See page
518
See page 518
See page 536
See page 537
See page 538
See page
136
See page 488 See page
70
See page 507
Seepage504
Seepage506On models without
keyless accesssystem
On models withkeyless accesssystem
Multi-Inf ormation Display
Inst rument s and Cont rols
89
U.S.
Canada
SH-AWD model only
SH-AWD model only
U.S. model shown
U.S. model shown
 —
—y
y
)   y  y
2009 TL

Page 93 of 648

See page145 See page
188
See page 188
See page 185
See page 186
See page 190 See page
191
See page 181
See page 183
See page 182
See page 181
See page 183
See page
552
Multi-Inf ormation Display
On models wit h keyless access
syst em
90
On models without
keyless access systemCanadian models only
\f—
—y
y
) \f\fy\f\fy
2009 TL

Page 94 of 648

ÎÎ

CONT INUED
If you try to enter the customizing
mode while the vehicle is moving,
you will see a ‘‘MUST STOP AND
SHIFTTOPARKTOCHANGE
SETTINGS’’ message and you
cannot change the settings.
You can customize some vehicle
control settings f or ‘‘DRIVER 1’’ and
‘‘DRIVER 2’’ separately.
To have the driver’s ID detected,
make sure the driver’s door is
unlocked with a corresponding
remote transmitter/keyless access
remote.
You can customize some vehicle
control settings. To change the
settings, the ignition switch must be
in the ON (II) position, and the
vehicle must be stopped with the
transmission in Park.
If you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shif t lever out
of Park, the display will change to
the normal screen.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0),
ACCESSORY Mode is the
equivalent of ACCESSORY (I),
and ON Mode is the equivalent
of ON (II). For more
information, see pages and. If you use the key to unlock the
driver’s door, the system cannot
recognize either ‘‘DRIVER 1’’ or
‘‘DRIVER 2.’’
:
180 178On models without keyless access
system
Multi-Inf ormation Display
K eyless Memory Settings
Inst rument s and Cont rols
91
TM
\f—
—y
y
) \f\fy\f\fy
2009 TL

Page 95 of 648

ÛÝRef er to the table on the f ollowing
pages about the settings you want to
customize.
If you want to change any vehicle
control settings, select Keyless
Memory Settings by pressing
either INFO button ( / ), then
press the SEL/RESET button. Select
CHG SETTING, then press the
SEL/RESET button.
Multi-Inf ormation Display
92
DRIVER’S ID
Press the SEL/RESET
button.
TM
\f—
—y
\fy
) \f\fy\f\fy
2009 TL

Page 96 of 648


ÎÎ
ÎÎÎ




µ™¶ ™
µ™¶ ™


CONT INUED
Group Setup Menu Item Page
Description Setting Option
LOW
MIN
OFF
MET ER SET UP
(P.98)
POSITION SETUP
(P.107) LANGUAGE SELECT ION
ADJUST OUTSIDE
TEMP. DISPLAY
TRIP COMPUTER TRIP A
INFO RESET
ADJUST ALARM VOLUME
AUTO INTERIOR
ILLUMINATION
KEYLESS START GUIDANCE
SCREENS
MEMORY POSIT ION LINK
99
100
101
103
104
105
108
Changes the language used in the display.
Changes the outside temperature reading above or
below its current reading.
Causes trip meter A and the average fuel economy
to reset when you refuel.
Changes the indicator alarm volumes into three
levels.
Changes the interior light sensitivity to your liking.
Changes the display of the keyless start guidance
screens.
Changes the driver’s seat and the outside mirror
positions to a stored setting. ENGLISH
FRENCH
SPANISH
5°F 0°F 5°F
(U.S.) 3°C 0°C 3°C
(Canada)
WITH REFUEL
MANUAL ONLY
IGN OFF
HIGH
MID
LOW
MAX
HIGH
MID
ON
OFF
ON
OFF
1:
2: Default setting
Only on models with Keyless Access system
2 1
111
1
1
1
1
Multi-Inf ormation Display
Inst rument s and Cont rols
93
 — —y
y
)   y  y
2009 TL

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 61-70 ... 140 next >