ESP Acura TL 2009 Workshop Manual

Your Bluetooth compatible phone
with HandsFree Prof ile must be
paired to HFL bef ore you can make
and receive hands-free calls. To
conf irm that your phone is Bluetooth
compatible, visit, or call (888) 528-7876.
In Canada, visit , or call
(888) 9-ACURA-9. Your phone
retailer should also be able to
conf irm if your phone is Bluetooth
compatible. The f ollowing procedure works f or
most phones. If you cannot pair
your phone to HFL with this
procedure, ref er to your phone’s
operating manual, visit
,callthe
HandsFreeLink
consumer
support at (888) 528-7876, or call
your phone retailer. In Canada,
visit , or call (888) 9-
ACURA-9.
Park the vehicle. With your phone
on and the vehicle’s power mode
in ACCESSORY or ON, press the
INFO button, rotate the interface
dial to select ‘‘Cellular Phone,’’ and
push ENTER, or press the Talk
button and say ‘‘Cellular Phone.’’
HFL responds ‘‘Which cellular
phone item would you like to
select?’’
HFL does not allow you to pair
your phone if the vehicle is
moving.
During the pairing process, turn
of f any previously paired phones
bef ore pairing a new phone.
Your phone’s battery may drain
f aster when it is paired to HFL.
HFL operates best if your phone is
set to automatically recognize the
system (Discovery mode).
If af ter 3 minutes your phone is
not ready to pair or a phone is not
f ound, the system will time out
and start the pairing process f rom
the beginning.
Up to six phones can be paired to
HFL.
For more inf ormation on how to
select the power mode, see page.
1.
178www.acura.com/
handsf reelink www.acura.ca www.acura.
com/handsf reelink
www.acura.ca
Pairing Your Phone
NOT E:
BluetoothHandsFreeL ink(Models with navigation system)
426
\f—\f—y
\fy
) \f\fy\f
y
2009 TL

CONT INUED
Move the interf ace selector down.
The ‘‘Phone setup’’ screen appears.
Rotate the dial to select ‘‘Setup
Bluetooth Phone,’’ and press
ENTER, or press the Talk button
and say ‘‘Phone setup.’’ HFL
responds ‘‘Please select the phone
setup item.’’ Press the Talk button
and say ‘‘Setup Bluetooth Phone.’’
HFL responds ‘‘Please select a
Bluetooth Phone item to setup.’’When a screen message appears
that provides a pass-key, enter the
pass-key on your cell phone when
prompted in its discovery mode.
Make sure your phone is in
Discovery mode at this point.
Rotate the dial to select ‘‘Pair
phone’’ and press ENTER, or
press the Talk button and say
‘‘Pair phone.’’
To get your phone into its
discovery mode, ref er to the
phone’s operation manual. 4.
3.
2.
BluetoothHandsFreeL ink(Models with navigation system)
Features
427
Example
\f—\f—y
\fy
) \f\fy\fy
2009 TL

Rotate the dial to select ‘‘Pass-key’’
and press ENTER, or press the
Talk button and say ‘‘Pass-key.’’
HFL responds ‘‘Would you like to
setup a random or f ixed Pass-
key?’’
Select the Cellular Phone screen,
then move the interface selector
down. Rotate the dial to select
‘‘Setup Bluetooth Phone’’ and
press ENTER, or press the Talk
button and say ‘‘Setup Bluetooth
Phone.’’ HFL responds ‘‘Please
select a Bluetooth Phone item to
setup.’’
Rotate the interface dial to select
‘‘Yes’’ and press ENTER, or press
the Talk button and say ‘‘Yes.’’ The
display changes to the deleting
procedure. To delete a phone, see
page . When the phone is
deleted, you can pair the seventh
(now sixth) phone to the system.
HFL uses a Bluetooth pass-key to
pair a cellular phone. By def ault, the
system generates and uses a random
pass-key f or any Bluetooth
connection. You can change this
setting to the fixed pass-key. Do the
f ollowing.
1.
2.
431
CONT INUED
Specif ying t he Bluet oot hPass-key
BluetoothHandsFreeL ink(Models with navigation system)
Features
429
——y
y
) yy
2009 TL

Rotate the dial to select either
‘‘Fixed’’ or ‘‘Random’’ and press
ENTER, or press the Talk button
and say ‘‘Fixed’’ or ‘‘Random.’’
The navigation system generates
and uses a random pass-key f or
subsequent phone pairing.
HFL returns to the Setup Bluetooth
phone screen. Specif y a 4-digit number in the pass-
keyentryscreenandmovethe
interf ace selector down. The
specif ied number will be generated
and used f or subsequent phone
pairing.
HFL responds ‘‘Please say your 4-
digit pass-key.’’Refer to the navigation system
manual f or inf ormation on how to
enter numbers.
3.
When selecting ‘‘Random’’ When selecting ‘‘Fixed’’
BluetoothHandsFreeL ink(Models with navigation system)
430
Example
\f—\f—y
y
) \f\fy\fy
2009 TL

To delete a paired phone
If you would like to delete a phone,
do the f ollowing.Select the Cellular Phone screen,
then move the interface selector
down. Rotate the dial to select
‘‘Setup Bluetooth Phone’’ and
press ENTER, or press the Talk
button and say ‘‘Setup Bluetooth
Phone.’’ HFL responds ‘‘Please
select a Bluetooth Phone item to
setup.’’ Rotate the dial to select ‘‘Delete a
phone’’ and press ENTER, or
press the Talk button and say
‘‘Delete a phone.’’ HFL responds
‘‘Please select the number of the
phone to delete f rom the list.’’
Rotate the dial to select the phone
you want to delete f rom the list,
and press ENTER. Move the
interf ace selector down f or ‘‘OK.’’
You can also press the Talk button
and say the list number of the
phone you want to delete, then say
‘‘OK.’’
1.
2.
3.
CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Features
431
The list number 1 is selected.LIST NUMBER
\f—\f—y
\fy
) \f\fy\fy
2009 TL

You can change to another phone
when there are multiple paired
phones.ActivatetheDiscoverymodeof
the Bluetooth-compatible phone
you would like to link.
Press the INFO button, rotate the
dial to select ‘‘Cellular Phone,’’ and
press ENTER, or press the Talk
button and say ‘‘Cellular Phone.’’
HFL responds ‘‘Which cellular
phone item would you like to
select?’’
The above screen is displayed.
Rotate the dial to select ‘‘Yes’’ and
press ENTER, or press the Talk
button and say ‘‘Yes.’’
4. 1.
2.
To change f rom the currently linkedphone to another paired phone
BluetoothHandsFreeL ink(Models with navigation system)
432
\f—\f—y

\fy
) \f\fy\fy
2009 TL

Move the interf ace selector down
to select the ‘‘Phone setup’’ screen,
or press the Talk button and say
‘‘Phone setup.’’ HFL responds
‘‘Please select the phone setup
item.’’
Rotate the dial to select ‘‘Search
for next phone’’ and press ENTER,
or press the Talk button and say
‘‘Search f or next phone.’’HFL attempts to connect with
another paired phone, and the
message ‘‘Searching f or a Bluetooth
phone’’ appears.
If the above screen is displayed,
pairing has f inished. You can make calls using any phone
number or by using a name in the
HFL phonebook. You can also redial
f rom an incoming or outgoing
number. During a call, HFL allows
youtotalkupto30minutesafteryou
set the power mode to VEHICLE
OFF (LOCK). Continuing a call
without running the engine may
discharge and weaken the vehicle’s
battery.
For more inf ormation on how to
select the power mode, see page .
3.
178
CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Making a Call
Features
433
\f—
—y
\f

y
) \f\fy\fy
2009 TL

Rotate the dial to select ‘‘Dial’’ and
press ENTER, or press the Talk
button and say ‘‘Dial.’’ HFL
responds ‘‘Please say the cellular
phone number continuously.’’Rotate the dial and press ENTER
to select each number, or press
the Talk button and say the entire
number as a continuous string.
For example, say ‘‘123-456-7890.’’
If the wrong number is displayed
on the screen, press the Talk
button again and say ‘‘Delete’’ or
‘‘Clear.’’ All digits will be cleared.
With your phone on and the power
mode in ACCESSORY or ON,
press the INFO button.
For more inf ormation on how to
select the power mode, see page
.
Rotate the dial to select ‘‘Cellular
Phone’’ and press ENTER, or
press the Talk button and say
‘‘Cellular Phone.’’ HFL responds
‘‘Which cellular phone item would
you like to select?’’
2.
3.4.
1.
178
To make a call by dialing a number, dothis:
BluetoothHandsFreeL ink(Models with navigation system)
434
Example
\f—\f—y
y
) \f\fy\fy
2009 TL

ÌHFL Calling display appears,
notifying you that the system is
dialing the entered phone number.
Once connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob or the steering wheel
volume controls. To end the call, rotate the dial to
select ‘‘Hang-up’’ and press
ENTER, or press the Hang-Up
button on the steering wheel.
To delete a number with the
interf ace dial, move the selector to
the left and release it. To delete all
the numbers in one go, move the
selector to the lef t and hold it.
To enter a pound ( ), say
‘‘pound.’’ To enter a star (*), say
‘‘star.’’
Onthescreen,movetheinterface
selector to the right to select a pound
or star.
When you have f inished, press the
Pick-Upbuttononthesteering
wheel or move the interf ace
selector down to make the call, or
press the Talk button and say
‘‘Dial.’’ HFL responds ‘‘Dialing.’’
5.
6.7.
CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Features
435
NOTE:
Example
\f—
—y
\f
y
) \f\fy\f\fy
2009 TL

To make a call using a name in the HFLphonebook, do this:
With your phone on and the power
mode in ACCESSORY or ON,
press the INFO button.
Rotate the dial to select ‘‘Phone
Book’’ and press ENTER, or press
the Talk button and say ‘‘Phone
Book.’’ If a phonebook has already
been imported, HFL responds
‘‘Please select the number of the
phonebook f rom the list.’’ If a
phonebook has not been imported,
HFLwillattempttoimportitfrom
your phone (see page ).Rotate the dial to select a contact
name and press ENTER, or press
the Talk button and say the list
number of the name you want to
select. HFL responds ‘‘Please
select the number of the phone
number f rom the list.’’
For more inf ormation on how to
select the power mode, see page
.
Rotate the dial to select ‘‘Cellular
Phone’’ and press ENTER, or
press the Talk button and say
‘‘Cellular Phone.’’ HFL responds
‘‘Which cellular phone item would
you like to select?’’
2.
3.4.
1.
455
178
BluetoothHandsFreeL ink(Models with navigation system)
436
The list number 1 is selected.
LIST NUMBER
\f—\f—y
y
) \f\fy\f
y
2009 TL