display Acura TSX 2010 Service Manual

Û
Ý
ÛÝ
ÛÝ
Each time you press the INFO ( /) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the custom setting then press the
SEL/RESET button to enter your
selection. You can customize the MEMORY
POSITION LINK setting in position
setup.
While ‘‘POSITION SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
All models except Canadian TSX with
4-cylinder engine
Position Setup
Multi-Inf ormation Display
92
: Press the SEL/RESET button.
: Press the INFO button ( / ).
2010 TSX

ÛÝ
Û
Ý
Memory Position Link
Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button. When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘MEMORY POSITION LINK’’ and
repeat the procedure again.
If ‘‘MEMORY POSITION LINK’’ is
set to ‘‘ON,’’ the driver’s seat moves
to the position stored in the memory
(see page ) when you open the
driver’s door, using the remote
transmitter.
You can choose this item to
customize f rom ‘‘POSITION
SETUP’’ by pressing the INFO ( /
) button repeatedly. 142
Multi-Inf ormation Display
Inst rument s and Cont rols
93
2010 TSX

Û
Ý
ÛÝ
Î
Î
ÛÝ
INTERIOR LIGHT
DIMMING TIME
HEADLIGHT AUTO OFF TIMER
While ‘‘LIGHTING SETUP’’ is
shown, press the SEL/RESET
button to enter the customize mode.
Each time you press the INFO ( / ) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection. Here are the three custom settings
f or the lighting setup:
AUTO LIGHT SENSITIVITY
: All models except Canadian TSX with 4-cylinder engine
Lighting Setup
Multi-Inf ormation Display
94
: Press the SEL/
RESET button.
: Press the INFO button ( / ).
2010 TSX

Û
Ý ÛÝ
CONT INUED
Interior Light Dimming Time
Press the SEL/RESET button to see
the selections.
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘INTERIOR LIGHT DIMMING
TIME’’ and repeat the procedure
again.
The interior lights f ade out when you
close all doors. To change how long
thelightsstayonbeforetheyfade
out, f ollow these instructions:
You can choose this item to
customize f rom ‘‘LIGHTING
SETUP’’ by pressing the INFO ( /
) button repeatedly. Select the desired setting (15 SEC,
30 SEC, or 60 SEC) by pressing the
INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button.
Multi-Inf ormation Display
Inst rument s and Cont rols
95
2010 TSX

Û
Ý
ÛÝ
Headlight Auto Of f Timer
You can choose this item to
customize f rom ‘‘LIGHTING
SETUP’’ by pressing the INFO ( /) button repeatedly. Press the SEL/RESET button to see
the selections.
The headlights, parking lights, side
marker lights, taillights, and license
plate lights go of f af ter the selected
time when you remove the key f rom
the ignition switch and close the
driver’s door. To change how long
thelightsstayonbeforetheygooff,
f ollow these instructions:
Select the desired setting (60 SEC,
30 SEC, 15 SEC or 0 SEC) by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
Multi-Inf ormation Display
96
2010 TSX

µÛ
Ý
µ
µ µ
µ
CONT INUED
Auto Light Sensitivity
All models except Canadian TSX with4-cylinder engine
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘HEADLIGHT AUTO OFF TIMER’’
and repeat the procedure again. MIN
Theheadlightscomeonwhenitis
dark.
You can choose this item to
customize f rom ‘‘LIGHTING
SETUP’’ by pressing the INFO ( /
) button repeatedly.
LOW
Theheadlightscomeonwhenitis
somewhat dark. MID
Theheadlightscomeonwhenitisas
bright as sunset or sunrise. HIGH
Theheadlightscomeonwhenitis
somewhat bright. MAX
Theheadlightscomeonwhenitis
bright. The headlights automatically come
on when the headlight switch is in
the AUTO position and the ambient
light reaches a changeable level. You
can select the auto light sensitivity
f rom the f ollowing f ive levels:
Multi-Inf ormation Display
Inst rument s and Cont rols
97
2010 TSX

ÛÝWhen your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
LIGHT SENSITIVITY’’ and repeat
the procedure again.
Press the SEL/RESET button to see
the selections.
Select the desired setting (MAX,
HIGH, MID, LOW or MIN) by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
Multi-Inf ormation Display
98
2010 TSX

Û
Ý
ÛÝ
ÛÝ
CONT INUED
AUTO DOOR LOCK
Here are the five custom settings for
the door setup:
DOOR LOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK TIMER
AUTO DOOR UNLOCK
While ‘‘DOOR SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
Each time you press the INFO ( / ) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
Multi-Inf ormation Display
Door Setup
Inst rument s and Cont rols
99
: Press the INFO button ( / ).
: Press the SEL/
RESET button.
2010 TSX

ÛÝ
ÛÝ
µ
µ
µ
Auto Door Lock
(Automatic transmission model only)
There are three settings you can
choose f rom: Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
Press the SEL/RESET button to
enter the selecting mode.
OFF
The auto door lock is deactivated all
the time.
WITH VEH SPD
The doors lock when the vehicle
speed reaches about 10 mph (about
15 km/h).
SHIFT FROM P
The doors lock whenever you move
the shift lever out of Park.
Multi-Inf ormation Display
100
A/T model is shown.
2010 TSX

ÛÝ
CONT INUED
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
DOOR LOCK’’ and repeat the
procedure again.
To select whether the driver’s door
unlocks or all the doors unlock when
you unlock the doors with the
remote transmitter or the key, follow
these instructions.
You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
Door Lock Mode
Multi-Inf ormation Display
Inst rument s and Cont rols
101
2010 TSX