ECU Acura TSX 2011 Owner's Manual

Contents
Quick Reference Guide
P. 2
Safe Driving
P. 2 1
Instrument Panel
P. 6 3
Controls
P. 8 7
Features
P. 13 7
Driving
P. 1 8 1
Maintenance
P. 2 2 1
Handling the Unexpected
P. 2 7 5
Information
P. 3 0 1
Index
P. 3 15
Child Safety P. 48 Exhaust Gas Hazard P. 60 Safety Labels P. 61
Opening and Closing the Trunk P. 95 Security System P. 98 Opening and Closing the Windows P. 100
Operating the Switches Around the Steering Wheel P. 104 Adjusting the Mirror P. 114
Interior Lights/Interior Convenience Items P. 125 Climate Control System P. 133
Audio Error Messages P. 158 Audio Remote Controls P. 160
HomeLink
® Universal Transceiver P. 165Bluetooth
® HandsFreeLink
® P. 167 Compass P. 179
When Driving P. 191 Braking P. 210 Parking Your Vehicle P. 214
Accessories and Modifications P. 219
Maintenance Under the Hood P. 229 Replacing Light Bulbs P. 247
Checking and Maintaining Tires P. 259 Battery P. 268 Remote Transmitter Care P. 269
Cleaning P. 271
Engine Does Not Start P. 283 Jump Starting P. 284 Shift Lever Does Not Move P. 287
Fuses P. 294 Emergency Towing P. 298
When you Cannot Open the Trunk P. 300
Devices that Emit Radio Waves P. 307 Reporting Safety Defects P. 308
Authorized Manuals P. 313 Client Service Information P. 314

5Quick Reference Guide
Seat Belt Installing a Child Seat
P.55
Seat Belt to Secure a Child Seat
P.57
Seat Belts
P.26
Coat Hook
P.130
Grab Handle Side Curtain Airbags
P.43 Sunglasses Holder
P.131
HomeLink
® Button
P.165
Moonroof Switch
P.103
Spotlights
P.125 Front Seat
P.116
Sun Visors Vanity Mirrors Center Pocket
*
Side Airbags
P.40
Rear Seat
P.123
LATCH to Secure a Child Seat
P.53
Ceiling Light
P.125
Auxiliary Input Jack
P.140
USB Adapter Cable
P.139
Accessory Power Socket
P.129
* Not available on all models

8Quick Reference Guide
Instrument Panel
P.63
Lights On IndicatorHigh Beam IndicatorFog Light Indicator
Temperature
Gauge
Fuel Gauge Speedometer
Tachometer
Low Fuel
Indicator
Security System Alarm
Indicator Multi-Information Display
Shift Lever Position Indicator
*
Gear Position Indicator
*
Gauges

P.75
Multi-Information Display

P.76
System Indicators

P.64
Lights Reminders
System IndicatorsSystem Indicators
VSA
® OFF Indicator
Turn Signal and
Hazard Warning
IndicatorsElectric Power
Steering (EPS)
IndicatorMalfunction
Indicator LampLow Oil Pressure
IndicatorCharging System
IndicatorAnti-lock Brake
System (ABS)
IndicatorVehicle Stability
Assist (VSA
®) System
Indicator
Seat Belt Reminder
IndicatorImmobilizer System
IndicatorSupplemental
Restraint System
IndicatorLow Tire Pressure/
TPMS IndicatorDoor and Trunk
Open IndicatorCruise Main IndicatorCruise Control
IndicatorSystem Message
Indicator Parking Brake
and Brake System
Indicator
U. S.Canada
Side Airbag Off
Indicator
U. S.Canada

17Quick Reference Guide
What to Do If
The ignition switch does not
turn from
to
. Why?t The steering wheel may be locked.
Try to turn the steering wheel left and
t
right while turning the ignition key.
The ignition switch does
not turn from
to
and I
cannot remove the key. Why?
The shift lever should be moved to
P
.
Why does the brake pedal
pulsate slightly when applying
the brakes?
This can occur when the ABS activates, and does not indicate
a problem. Apply firm, steady pressure on the brake pedal.
Never pump the brake pedal.
The rear door cannot be
opened from inside the
vehicle. Why?
Check if the childproof lock is in the
LOCK position. If so, open the rear
door with the outside door handle.
To cancel this function, push the
lever to the UNLOCK position.
Why do the doors lock after
I unlocked the doors using a
remote transmitter?
If you do not open the doors within 30 seconds, the doors are
relocked automatically for security.

Seat Belts
Fastening a Seat Belt
29
Continued
Safe Driving
Latch
Plate
Buckle
2. Insert the latch plate into the buckle, then
tug on the belt to make sure the buckle is
secure.
Make sure that the belt is not twisted or
caught on anything.
Fastening a Seat Belt
1. Pull the seat belt out slowly.
Correct
Seated
Posture Pull out slowly.
Fastening a Seat Belt
No one should sit in a seat with an inoperative seat
belt or one that does not appear to be working
correctly. Using a seat belt that is not working
properly may not protect the occupant in a crash.
Have a dealer check the belt as soon as possible.
Never insert any foreign objects into the buckle or
retractor mechanism.
After adjusting a front seat to the proper position, and while sitting upright and
well back in the seat:
Adjusting the Seats

P.11 6

Seat Belts
Fastening a Seat Belt
30Safe Driving
Lap belt
as low as
possible
3. Position the lap part of the belt as low
as possible across your hips, then pull up
on the shoulder part of the belt so the
lap part fits snugly. This lets your strong
pelvic bones take the force of a crash and
reduces the chance of internal injuries.
4. If necessary, pull up on the belt again to
remove any slack, then check that the belt
rests across the center of your chest and
over your shoulder. This spreads the forces
of a crash over the strongest bones in your
upper body.
Fastening a Seat Belt
To release the belt, push the red PRESS button
then guide the belt by hand until it has retracted
completely.
When exiting the vehicle, be sure the belt is out of
the way and will not get closed in the door.
Adjusting the Shoulder Anchor
The front seats have adjustable shoulder anchors to accommodate taller and
shorter occupants.
1. Move the anchor up and down while
holding the release button.
2. Position the anchor so that the belt rests
across the center of your chest and over
your shoulder.
Adjusting the Shoulder Anchor
The shoulder anchor height can be adjusted to four
levels. If the belt contacts your neck, lower the
height one level at a time.
After an adjustment, make sure that the shoulder
anchor position is secure.
WARNING
Improperly positioning the seat belts can
cause serious injury or death in a crash.
Make sure all seat belts are properly
positioned before driving.
Push

Child Safety
Protecting Child Passengers
49Safe Driving
Protecting Child Passengers
To deactivate a lockable retractor, release the buckle
and allow the seat belt to wind up all the way.
To remind you of the passenger's front airbag
hazards and child safety, your vehicle has warning
labels on the dashboard (U.S. models) and on the
front visors. Please read and follow the instructions
on these labels.
Safety Labels


P. 61
Any child who is too small to wear a seat belt correctly must be restrained in an t
approved child seat that is properly secured to the vehicle using either the lap
belt portion of the lap/shoulder belt or the lower anchors of the LATCH system.
Never hold a child on your lap because it is impossible to protect them in the t
event of a collision.
Never put a seat belt over yourself and a child. During a crash, the belt would t
likely press deep into the child and cause serious or fatal injuries.
Never let two children use the same seat belt. Both children could be very t
seriously injured in a crash.
Do not allow children to operate the doors, windows or seat adjustments. t
Do not leave children in the vehicle unattended, especially in hot weather t
when the inside of the vehicle can get hot enough to kill them. They could also
activate vehicle controls causing it to move unexpectedly.
WARNING
Allowing a child to play with a seat belt or
wrap one around their neck can
result in serious injury or death.

Instruct children not to play with any seat
belt and make sure any unused
seat belt a child can reach is buckled, fully
retracted, and locked.

Child Safety
Safety of Infants and Small Children
50Safe Driving
Safety of Infants and Small Children
Positioning a rear-facing child seat
Child seats must be placed and secured in a
rear seating position.
Protecting Infants
Rear-facing child seats should never be installed in a
forward facing position.

Always refer to the child seat manufacturer’s
instructions before installation.
WARNING
Placing a rear-facing child seat in the front
seat can result in serious injury or death
during a crash.
Always place a rear-facing child seat in the
rear seat, not the front.
Protecting Infants
An infant must be properly restrained in a rear-facing, reclining child seat until the
infant reaches the seat maker's weight or height limit for the seat, and the infant is
at least one year old.When properly installed, a rear-facing child seat may prevent the driver or a front
passenger from moving their seat all the way back, or from locking their seat-back
in the desired position.

It can also interfere with proper operation of the passenger's advanced front
airbag system.
Airbags

P. 3 3

If this occurs, we recommend that you install the child seat directly behind the
front passenger's seat, move the seat as far forward as needed, and leave it
unoccupied. Or, you may wish to get a smaller rear-facing child seat.

Child Safety
Safety of Infants and Small Children
51
Continued
Safe Driving
Protecting Smaller Children
Educate yourself about the laws and regulations
regarding child seat use where you are driving, and
follow the child seat manufacturer's instructions.
Many experts recommend use of a rear-facing seat
up to age two, if the child’s height and weight are
appropriate for a rear-facing seat.
Protecting Smaller Children
If a child is at least one year old and within the weight range indicated by the
child seat manufacturer, the child should be properly restrained in a firmly secured
forward-facing child seat.
Forward-facing child seat placement
We strongly recommend placing a forward-
facing child seat in a rear seating position.
Placing a forward-facing child seat in the front seat can be hazardous, even with
advanced front airbags that automatically turn the passenger's front airbag off. A
rear seat is the safest place for a child.
WARNING
Placing a foward-facing child seat in the
front seat can result in serious injury or
death if the front airbag inflates.
If you must place a forward-facing child
seat in front, move the vehicle seat as far
back as possible, and properly restrain the
child.

Child Safety
Safety of Infants and Small Children
52Safe Driving
Selecting a Child Seat
Most child seats are LATCH-compatible (Lower Anchors and Tethers for CHildren).
Some have a rigid-type connector, while others have a flexible-type connector.
Both are equally easy to use. Whichever one you choose, follow the manufacturer's
use and care instructions.
LATCH-compatible child seats can be secured to the vehicle by using two lower
anchors and a top tether anchor in one of the outer seating positions.
Important consideration when selecting a child seat
Make sure the child seat meets the following three requirements:
The child seat is the correct type and size for the child. t
The child seat is the correct type for the seating position. t
The child seat is compliant with Federal Motor Vehicle Safety Standard 213 or t
Canadian Motor Vehicle Safety Standard 213.
Selecting a Child Seat
Installation of a L ATCH-compatible child seat is
simple.
L ATCH-compatible child seats have been developed
to simplify the installation process and reduce the
likelihood of injuries caused by incorrect installation.