Jack Acura TSX 2011 Owner's Manual

5Quick Reference Guide
Seat Belt Installing a Child Seat
P.55
Seat Belt to Secure a Child Seat
P.57
Seat Belts
P.26
Coat Hook
P.130
Grab Handle Side Curtain Airbags
P.43 Sunglasses Holder
P.131
HomeLink
® Button
P.165
Moonroof Switch
P.103
Spotlights
P.125 Front Seat
P.116
Sun Visors Vanity Mirrors Center Pocket
*
Side Airbags
P.40
Rear Seat
P.123
LATCH to Secure a Child Seat
P.53
Ceiling Light
P.125
Auxiliary Input Jack
P.140
USB Adapter Cable
P.139
Accessory Power Socket
P.129
* Not available on all models

137
Features
This chapter describes how to operate technology features on models without
the navigation system and HomeLink
® Universal Transceiver.
Audio System
About Your Audio System
...........................
13 8
USB Adapter Cable
..........................................
13 9
Auxiliary Input Jack
.........................................
14 0
Audio System Theft Protection
................
14 0
Audio System Basic Operation
Adjusting the Sound
.......................................
142
Playing the AM/FM Radio
............................
143
Playing the XM
® Radio
...................................
145
Playing a CD
.........................................................
147
Playing an iPod
® ................................................
15 0
Playing a USB Flash Drive
.............................
153Playing Bluetooth
® Audio
.............................
15 6
Audio Error Messages
CD Player
...............................................................
15 8
iPod
®/USB Flash Drive
.....................................
159
Audio Remote Controls
...............................
16 0
General Information on the Audio System
XM
® Radio Service
...........................................
161
Recommended CDs
.........................................
162
Compatible iPod
® and
USB Flash Drives .............................................
16 4
HomeLink
® Universal Transceiver
Training HomeLink
...........................................
165Bluetooth
® HandsFreeLink
®......................
167
Using HFL
.............................................................
167
HFL Menus
............................................................
169
Compass
....................................................................
17 9

Audio System
Auxiliary Input Jack
140Features
Auxiliary Input JackUse the jack in the console compartment to connect standard audio devices.
1. Open the AUX cover.
2. Connect a standard audio device to the
input jack using a 1/8 inch (3.5 mm) stereo
miniplug.

The audio system automatically switches
to the AUX mode.
Auxiliary Input Jack
To switch the mode, press any of the audio mode
buttons. You can return to the AUX mode by
pressing the AUX button.
You cannot use the auxiliary input jack if you
replace the audio system.
Audio System Theft ProtectionThe audio system is disabled when it is disconnected from the power source, such
as when the battery is disconnected or goes dead.
Entering the audio security code
"ENTER CODE" appears on the display when the power is reconnected.
1. Turn on the audio system.
2. Enter the audio security code using the preset buttons. If you enter an incorrect
digit, continue to the last digit, then try again. If you do not enter the code
correctly after 10 tries, you need to visit a dealer to have the system reset.
Audio System Theft Protection
Find the audio system's security code and serial
number on the radio code card.
Do not store the card in your vehicle. If you lose the
radio code card, you must obtain the information
from a dealer.

157
Features
Audio System Basic Operation
Playing Bluetooth
® Audio
To P l ay
Bluetooth
® Audio Files
1. Make sure that your phone is linked to HFL.
2. Press the AUX button.
Check the following if the phone is not recognized:
Another HFL-compatible phone, which is not compatible for Bluetooth
® Audio, is
already linked.
To pause or resume a file
1. Press the MENU button.
2. Rotate
to select RESUME/PAUSE, then press
.
Each time you press
, the setting switches between PAUSE and RESUME.
Switching to HFL
Press the
(HFL Talk) button on the
steering wheel to receive a call when
Bluetooth
® Audio is playing.
Bluetooth

® HandsFreeLink
® (HFL) P. 1 6 7
Press the
(HFL Back) button to end the
call and return to Bluetooth
® Audio.
To Play Bluetooth
® Audio Files
To play the audio files, you may need to operate
your phone. If so, follow the phone maker's
operating instructions.
The pause function may not be available on some
phones.
If any audio device is connected to the auxiliary
input jack, you may need to press the AUX
button repeatedly to select the Bluetooth
®
Audio system.
Switching to another mode pauses the music
playing from your phone.
Switching to HFL
If you receive a call while Bluetooth
® Audio is in the
pause mode, it will resume play after ending
the call.
Button
Button

General Information on the Audio System
Recommended CDs
162Features
Use only high-quality CD-R or CD-RW discs labeled for audio use. t
Use only CD-R or CD-RW discs on which the recordings are closed. t
Play only standard round shaped CDs. tThe CD packages or jackets should have one of these marks.
Recommended CDs
A Dual-disc cannot play on this audio unit. If
recorded under certain conditions, a CD-R or CD-
RW may not play either.
Recommended CDs
CDs with MP3, WMA or AAC filesSome software files may not allow for audio play or text data display. t
Some versions of MP3, WMA, or A AC formats may be unsupported. t

To o l s
276Handling the Unexpected
Types of Tools
Using a Jack


P. 2 8 0
Types of Tools
Wheel Nut Wrench/
Jack Handle
Jack Handle BarJack

If a Tire Goes Flat
Changing a Flat Tire
278Handling the Unexpected
2. Take the tool case out of the trunk. Take
the jack and wheel nut wrench out of the
tool case.
3. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tire. 1. Pull the handle on the trunk floor lid and
open the lid. Hook the handle to the edge
of the trunk opening.
Getting Ready to Replace the Flat Tire
4. Place a wheel block or rock in front and
rear of the wheel diagonal to the flat tire.
The tire to be replaced.
Wheel
Blocks
Tool Case
Spare Tire

If a Tire Goes Flat
Changing a Flat Tire
280Handling the Unexpected
WARNING
The vehicle can easily roll off the jack,
seriously injuring anyone underneath.
Follow the directions for changing a tire
exactly, and never get under the vehicle
when it is supported only by the jack.
How to Set Up the Jack
How to Set Up the Jack
Do not use the jack with people or luggage in the
vehicle.
Use the jack provided in your vehicle.
Other jacks may not support the weight
("load") or
their shape may not match.
The following instructions must be followed to use
the jack safely.
Do not use while the engine is running. tUse only where the ground is firm and level. tUse only at the jacking points. tDo not get in the vehicle while using the jack. tDo not put anything on top of or underneath the tjack.
1. Place the jack under the jacking point
closest to the tire to be changed.
2. Turn the end bracket (as shown in the
image) clockwise until the top of the jack
contacts the jacking point.
Make sure that the jacking point tab is
resting in the jack notch.
3. Raise the vehicle, using the extension bar
and the jack handle, until the tire is off the
ground.
Extension Bar
Wheel Nut
Wrench as Jack
Handle

If a Tire Goes Flat
Changing a Flat Tire
281
Continued
Handling the Unexpected
Replacing the Flat Tire
1. Remove the wheel nuts and flat tire.2. Wipe the mounting surfaces of the wheel
with a clean cloth.
3. Mount the compact spare tire.
4. Screw the wheel nuts until they touch the
lips around the mounting holes, and stop
rotating.
5. Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order
indicated in the image. Go around,
tightening the nuts, two to three times in
this order.
Wheel nut torque:
80 lbf∙ft (108 N∙m, 11 kgf∙m)
Replacing the Flat Tire
Do not over tighten the wheel nuts by applying
extra torque using your foot or a pipe.

If a Tire Goes Flat
Changing a Flat Tire
282Handling the Unexpected
WARNING
Loose items can fly around the interior
in a crash and can seriously injure the
occupants.
Store the wheel, jack, and tools securely
before driving.
Storing the Flat Tire
1. Remove the center cap and place the flat
tire face down in the spare tire well.
2. Remove the spacer cone from the wing
bolt, flip it over, and insert it back on the
bolt. Secure the flat tire with the wing
bolt.
3. Securely put the jack and wheel nut
wrench back in the tool case. Store the
case in the trunk.
Storing the Flat Tire
TPMS and the Spare Tire
If you replace a flat tire with the spare tire, the low tire pressure/ TPMS indicator
comes on while you are driving. After driving for a few miles (kilometers), the
indicator will start blinking for a short time and then stay on. "CHECK TPMS
SYSTEM" appears on the multi-information display, but this is normal.
If you replace the tire with a specified regular tire, the warning message on the
multi-information display and the TPMS indicator will go off after a few miles
(kilometers).
TPMS and the Spare Tire
The system cannot monitor the pressure of the
spare tire. Manually check the spare tire pressure to
be sure that it is correct.
Use TPMS specific wheels. Each is equipped with a
tire pressure sensor mounted inside the tire behind
the valve stem.
Wing
Bolt
For
normal
tire For
compact
spare tire Spacer
Cone