engine Alfa Romeo 4C 2021 Instructieboek (in Dutch)

KNOWING THE INSTRUMENT PANEL TOOLS
30
CONTROL PANEL AND ON-BOARD INSTRUMENTS
DISPLAY WITH METRIC UNITS
1. Engine coolant gauge 2. Clock 3. Tachometer 4. Mode/gear engaged indicator 5. Gear Shift Indicator 6. External temperature
7. Fuel level gauge (the triangle on the right side of the symbol indicates the side of the car with the fuel filler)
8. Area dedicated to the display of the digital warning light related to the displayed message 9. Trip odometer 10. Speedometer
11. “Alfa DNA” system driving mode 12. Messages or information on display 13. Total odometer.
29A0L0118

31
DISPLAY WITH IMPERIAL UNITS
1. Engine coolant gauge 2. Clock 3. Tachometer 4. Mode/gear engaged indicator 5. Gear Shift Indicator 6. External temperature
7. Fuel level gauge (the triangle on the right side of the






symbol indicates the side of the car with the fuel filler)
8. Area dedicated to the display of the digital warning light related to the displayed message 9. Trip odometer 10. Speedometer
11. “Alfa DNA” system driving mode 12. Messages or information on display 13. Total odometer.
30A0L0129

35
Warning lights on panelMeaning What to do
Drive very carefully to the nearest
Alfa Romeo Dealership
to have the system inspected immediately.
20) 21)
Contact Alfa Romeo Authorized Services if you wish to
permanently deactivate the S.B.R. (Seat Belt Reminder)
system buzzer.
The system can be reactivated using the Set-up Menu.
EBD FAULT
The simultaneous switching on of the x(red) and >
(amber) warning lights with the engine on, indicates either
a failure of the EBD system or that the system is not
available. In this case, the rear wheels may suddenly lock
and the vehicle may swerve when braking sharply.
The display shows the dedicated message.
AIRBAG FAILURE
When the key is turned to MAR, the warning light switches
on, but it should switch off after a few seconds.
The warning light on indicates an airbag system failure.
The display shows the dedicated message.
SEAT BELTS NOT FASTENED
(where provided)
The warning light remains on steadily with the car at
stationary and the driver’s seat belt not correctly
fastened.
The warning light will turn on flashing together with the
buzzer when, with car moving, driver’s seat belt are not
fastened correctly.

37
Warning lights on panelMeaning What to do
In this case release the accelerator pedal to lower the
engine speed until the warning light stops flashing.
Continue the journey at moderate speed, trying to avoid
driving conditions that may cause further flashing and
contact a dedicated Alfa Romeo Dealership as soon as
possible.
If the Uwarning light flashes, it means that the catalytic
converter may be damaged.
3)
Under these conditions, the vehicle can continue travelling
at moderate speed without demanding excessive effort
from the engine. Prolonged use of the car with the warning
light on constantly may cause damage.
Contact a dedicated Alfa Romeo Dealership as soon as
possible. INJECTION / EOBD SYSTEM FAILURE
In normal conditions, when the ignition key is turned to
MAR the Uwarning light switches on, but it should
switch off as soon as the engine is started.
The operation of the Uwarning light may be checked by
traffic police using appropriate equipment.
Comply with the laws and regulations of the country
where you are driving.
If the Uwarning light stays on or switches on when
driving, it means that the injection system is not working
properly; in particular, if the warning light comes on
constantly, this indicates a malfunction in the
supply/ignition system that could cause excessive
exhaust emissions, a possible loss of performance, poor
driveability and high fuel consumption.
On some versions the display shows the dedicated
message.
The Uwarning light switches off if the malfunction
disappears, but is still stored by the system.

39
Warning lights on panelMeaningWhat to do
ASR OFF WARNING LIGHT
When the ignition key is turned to MAR, the warning light
switches on, but should switch off as soon as the engine is
started.
The warning light switches on when the ASR function
of the electronic stability control (ESC) system is
deactivated (by selecting “Race” mode).
The ASR warning light goes off.
Contact a dedicated Alfa Romeo Dealership as soon as
possible to have the problem corrected.
Contact a dedicated Alfa Romeo Dealership as soon as
possible. ESC ELECTRONIC STABILITY CONTROL SYSTE
When the ignition key is turned to MAR, the warning light
switches on, but should switch off as soon as the engine is
started.
Intervention by the system is indicated by the flashing of
the warning light: it indicates that the car is in critical
stability and grip conditions.
If the warning light does not switch off, or if it stays on
with the engine running, a failure was found on the ESC
system.
Hill Holder system fault
The digital warning light
*switches on and the display
shows the dedicated message, informing about Hill Start
system failure.

41
WARNING LIGHTS ON PANEL
Warning lights on panelMeaningWhat to do
LOW ENGINE OIL PRESSURE
When the key is turned to MAR, the digital warning light
switches on, but it should switch off as soon as the engine
is started. The digital warning light switches on constantly
together with the message in the display when the system
detects that the engine oil pressure is insufficient.
DETERIORATED ENGINE OIL
(where provided)
The digital warning light will turn on flashing and (on some
versions) with a specific message on the display.
The digital warning light may flash in the following ways,
depending on the versions:
– for 1 minute every two hours;
– for 3 minute cycles with the warning light off for
intervals of 5 seconds until oil is changed.
After the initial warning, each time the engine is started
up, the digital warning light will continue to flash in the
same mode, until the oil is changed. In addition to the
warning light the display will also show an associated
message (on some versions). If the digital warning light
flashes, this does not mean that the car is defective, but
simply informs the driver that it is now necessary to
change the oil as a result of regular vehicle use.
Remember that the deterioration of engine oil is
accelerated by using the car for short drives, preventing
the engine from reaching operating temperature.
4)
Contact a dedicated
Alfa Romeo Dealership as soon as possible to have the
problem corrected.
23)

KNOWING THE INSTRUMENT PANEL TOOLS
42
Warning lights on panelMeaningWhat to do
HOT ENGINE COOLANT
The digital warning light switches on when the key is
turned to MAR-ON, but it should switch off after a few
seconds. The warning light turns on when the engine is
overheated.
The associated message appears on the display.
ALTERNATOR FAULT
The digital warning light comes one with the engine
running only when an alternator fault is detected.Contact a dedicated
Alfa Romeo Dealership as soon as possible.
In normal driving conditions: stop the car, switch off the
engine and check that the water level in the reservoir is
not below the MIN mark. In this case, wait for the engine
to cool down, then slowly and carefully open the cap, top
up with coolant and check that the level is between the
MIN and MAX marks on the reservoir itself. Also check
visually for any fluid leaks.
Should the warning light turn on again at the next
start-up, contact a dedicated Alfa Romeo Dealership.
If the car is used under demanding conditions
(e.g. in high-performance driving): slow down and, if the
warning light stays on, stop the car.
Wait for 2 or 3 minutes with the engine running and
slightly accelerated to further favour the coolant
circulation. Then stop the engine.
Check that the coolant level is correct as described
above.
IMPORTANT On particularly demanding journeys, it is
advisable to keep the engine on and slightly accelerated
for a few minutes before switching it off.

43
Warning lights on panelMeaningWhat to do
TCT FAULT
The digital warning light switches on when the key is
turned to MAR-ON, but it should switch off after a few
seconds.
The digital warning light flashes (together with a message
in the display and an acoustic signal) to indicate that the
TCT is faulty.
The warning light or symbol switches on in the case of
transmission overheating, after a particularly demanding
use; engine performance is limited in this case.
DOOR OPEN
(where provided)
The digital warning light on the display switches on when
one or more doors are not properly shut. A buzzer will
sound when doors/tailgate are open and the car is moving.
BRAKE PAD WEAR
(where provided)
The digital warning light switches on when the front or
rear brake pads show signs of wear.
The associated message appears on the display.Replace the pad as soon as possible.
ALFA ROMEO CODE SYSTEM FAULT
(where provided)
The digital warning light (or symbol on the display) will
come on (on some versions, with a message on the
display) to indicate an Alfa Romeo CODE system or alarm
fault.Contact a dedicated
Alfa Romeo Dealership as soon as possible.
Contact a dedicated
Alfa Romeo Dealership as soon as possible.
If you need to start the engine in presence of a faulty
gearbox, follow the procedure shown in the
“TCT twin clutch transmission”, paragraph in the “Starting
the engine” section, “Starting and driving” chapter.

KNOWING THE INSTRUMENT PANEL TOOLS
46
Warning lights on panelMeaningWhat to do
GENERIC FAILURE INDICATION
(where provided)
The symbol appears on the display together with the
events shown below.
Engine oil pressure sensor
The symbol appears when a failure is detected in the
engine oil pressure sensor. The display shows the
dedicated message.In this case, go to a dedicated
Alfa Romeo Dealership as soon as possible to have the
fault corrected.
Clutch overheating message
The
symbol, together with a message on the display,
lights up to indicate clutch overheating.
If you continue driving, the symbol
will disappear and
the warning light will come on (on some versions
together with a message on the display) to indicate a
gearbox fault.
If the symbol comes on together with a message on
the display, limit the gear shifting and/or change the
condition of use, until normal operating conditions are
restored.
If the warning light lights up (a message will appear on
the display, on some versions) stop immediately, operate
the handbrake, switch off the engine and wait 5 minutes:
after this, normal transmission operating conditions will
be restored.
Should the transmission failure condition persist, contact
the dedicated Alfa Romeo Dealership.
FUEL CUT-OFF SYSTEM
The symbol and the corresponding message are shown on
the display in the following cases:
❒ fuel cut-off system intervention:
the yellow symbol lights up;
❒ fuel cut-off system failure:
the red symbol lights up.For reactivating the fuel cut-off system, refer to the
description in the
“Fuel cut-off system” section in the “In an emergency”
chapter. If it is not possible to restore the fuel supply,
contact a dedicated Alfa Romeo Dealership.
s è

KNOWING THE INSTRUMENT PANEL TOOLS
48
20)If, when the key is turned to MAR, the ¬warning light does not come on or if it stays on with the vehicle in motion (together with the
message on the display) there could be a failure in the safety systems; under these circumstances the airbags or pretensioners may not be
triggered in the event of an impact or, more rarely, they could be triggered accidentally. Before proceeding, contact a dedicated Alfa Romeo
Dealership to have the system checked immediately.
21)Failure of the
¬warning light is signalled by the flashing for longer than the usual 4 seconds of the “warning light. In addition, the airbag
system automatically disables the passenger side airbag. In this case, the ¬warning light may not indicate failures in the retaining systems.
Before proceeding, contact a dedicated Alfa Romeo Dealership to have the system checked immediately.
22)A failure of the
“warning light is indicated by the ¬warning light. In addition, the airbag system automatically disables the passenger
side airbag.
23)Deteriorated engine oil should be replaced as soon as possible after the digital warning light comes on, and never more than 500 km after it
first switches on. Failure to observe the above may result in severe damage to the engine and invalidate the warranty. Remember that when the
digital warning light comes on, it does not mean that the level of engine oil is low, so if it flashes you must not top up the engine oil.
24)If the warning light flashes with the car in motion, contact the dedicated Alfa Romeo Dealership.
IMPORTANT
3)If, when the ignition key is turned to MAR, the warning light does not turn on or if it turns on constantly or flashes when travelling
(on certain versions, together with the message on the display), contact a dedicated Alfa Romeo Dealership as soon as possible.
WARNING