OBD port AUDI A3 1997 8L / 1.G ATW Engine Readiness Code Workshop Manual

01-70


Display fields

1 2 3 4
Display group 086: Readiness code
Display
0 0 0 0 0 0 0 0 X X X X X X X X X X X X X X X X

Indicated
Ready-Bits
completed tests individual tests carried out individual tests carried out
Functional range
1 = not completed
0 = completed 1 = not completed
0 = completed 1 = not completed
0 = completed
Specified value
0 0 0 0 0 0 0 0 X X X X X X X X X X X X X X X X
Note
Significance of readiness code Page 01
-71


Note for display field 1:
Display field 1 is the most important. This indicates which system was checked via On Board Diagnostic (OBD) since the last
time DTC memory was erased or a new control module was implemented. Once DTC memory is erased, all testable values
are set to "1", after the test is performed successfully, the values are set to "0".
Pa
ge 4 of 35 Readiness code
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.8