buttons AUDI A3 2007 8P / 2.G RNS_E Navigation System Manual

CD/SD 84MP3 list control buttonSelecting MP3 driveFig. 85 MP3: List of MP3 drives–Press the MP3 list control button in the MP3 menu.
– Select the desired drive
fig.85.
– Select your track as necessary.Drives are shown greyed out in the list if there is no data carrier in
t hi s d ri v e o r i f t h e d a t a c a rr i e r c a n n o t b e r e a d . MP 3 CD s c a n b e us e d
as data carriers in the DVD Navigation drive, and SD/MCC memory
cards can be used in the MP3 card reader.
The active drive appears in the title line.
Tips
Not all MP3 CDs can be played. For example, it is possible that the
MP3 files cannot be read by the MP3 player
page 37.
Sound control buttonSound settingsStarting on
page 92, you can read how to select the sound
settings for the MP3 function.

CD/SD 88Setup MP3Opening and closing SetupFig. 91 Setup MP3: main menu– In an MP3 menu, press the button to open the
main Setup menu for the MP3 function
page 82,
fig.83.
– Press the button again to close the main Setup
menu again.The following settings are possible in Setup MP3:

Repeat options
page 88


With subdirectories
page 89


Tr a c k d i s p l a y
page 90


Categ. display
page 90
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Repeating MP3Fig. 92 Setup MP3: Repeating MP3 data carrier– Press the function button
page 16 in the MP3
menu.
SETUP
SETUP
SETUP

CD/SD 88Setup MP3Opening and closing SetupFig. 91 Setup MP3: main menu– In an MP3 menu, press the button to open the
main Setup menu for the MP3 function
page 82,
fig.83.
– Press the button again to close the main Setup
menu again.The following settings are possible in Setup MP3:

Repeat options
page 88


With subdirectories
page 89


Tr a c k d i s p l a y
page 90


Categ. display
page 90
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Repeating MP3Fig. 92 Setup MP3: Repeating MP3 data carrier– Press the function button
page 16 in the MP3
menu.
SETUP
SETUP
SETUP

NAME (directory)99
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Tips


If you press the button
page 16 wi t h i n t h e N a me f un c -
tion, you can program sound and tuning settings using the control
buttons and adjust the brightness for the display.


If you have not inserted a navigation DVD into the Navigation
DVD drive, you cannot use the Directory function.
Main directory menuGeneral
Starting from the main directory menu, directory
entries can be administered.Fig. 101 Display: Main directory menu
Entries in the directory are filed as directory cards. Each directory
card contains data fields to store data on the person, on their
address and for communication with this person. These data can
also be used for Navigation
page 136.
You can store two navigation destinations* for one directory entry,
one navigation destination* for the “business” category, and one
navigation destination* for the “private” category
page 103. You
can open these stored navigation destinations in the Navigation
m e n u u s i n g t h e c o n t r o l b u t t o n w i t h t h e Memory f u n c t i o n ( l o a d f r o m
directory)
page 136.
Navigation destinations which you set in the directory as a top desti-
nation
page 133 are displayed in the main navigation menu
under the function “Start route guidance”.
Using the button (directory), you can call up all entries
without and with stored destination. Via the navigation menu Load
from directory
page 136, you can call up all entries with stored
navigation destination.
SETUP
NAME

Navigation (NAV) 112Navigation voice guidanceRoute calculation is announced with the voice message “The route
is being calculated”. During this time, “The route is being calcu-
lated” is shown in the Navigation System display and “CALC” is
shown in the instrument cluster display.
When route calculation is complete, guidance is given by spoken
driving instructions and symbols. Driving recommendations are
a l w a y s m a d e w i t h e n o u g h t i m e t o m a k e a t u r n . A n a n n o u n c e m e n t i s
made in different stages in preparation for a change of direction.
Yo u c a n u s e t h e f o l l o w i n g o p t i o n s t o r e p e a t t h e l a s t n a v i g a t i o n v o i c e
message:

Press the Nav-Info control button in the navigation menu
page 150, if you are not in the Nav-Info submenu.

Press the right thumbwheel on the “multi-function steering
wheel with audio operation - version B*”
page 23.
You can choose which language you want for the voice messages
page 170.
WARNING
If driving instructions run contrary to traffic laws, the traffic laws
always take precedence.
Tips


During the announcement of a navigation prompt, you can
adjust the volume of the navigation prompt using the on/off knob
page 19 on the Navigation System or the volume buttons or the
right thumb wheel on the multi-function steering wheel*
page 21
.


If the v ehicle is in a loca tion which c annot be read b y the Naviga-
tion System (parking lot, garage, parking structure), a voice
message will inform you.
Presentation of maps in the Navigation System display
A comprehensive route will be shown graphically on a
map in the display.Fig. 115 Navigation: Example of a map in the Navigation System displayPress the SETUP function button
page 16 in the naviga-
tion menu. The route is visible on a map
fig.115.In addition to route guidance, you can display detailed information
a b o u t y o u r r o u t e o n t h e m a p . S e t t i n g s c a n b e e n t e r e d d i r e c t l y o n t h e

Navigation (NAV) 152

Intersection map
page 158


Auto intersection zoom
page 159


Compass
page 160


Version information
page 160


Demo mode
page 161


Set position/direction
page 161
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. Please note
page 9.
Map scheme
The map display can be changed according to driving
conditions (day/night).Fig. 164 Setup Navigation: Night map– Press the function button
page 16 in the navi-
gation menu.
– Select Map scheme.
– Select day, night or auto.day
Th e m a p d i s p l a y c o n t a i n s a ll to p o g ra p h i c a l d e t a i l s . The b a ckg ro u n d
is shown light. This makes map features easy to recognize. The
daytime view is optimized for ambient light
page 146, fig.154.
SETUP

Information (INFO) 164
– Rotate the control knob to the right. The data for your
current location with its geographical data and the
number of receivable satellites is displayed.The main information menu provides a display of your destination
with the following data:

Destination


Stopovers


Estimated time of arrival


Distance to destination


Location of your vehicle


Geographic location of your vehicle (latitude, longitude)


Received satellites
The last navigation announcement will also be repeated.Tips
If you press the button within the Info function, you can
program sound and tuning settings using the control buttons and
adjust the brightness for the display
page 169.
SETUP

CAR 168CARIntroductionSelecting car function– Pr e ss t h e fu n c t i o n b u t to n
page 16. Th e m ai n c a r
menu or the menu for the Versi on function will be
displayed.If you select the Ve rsi on function in the main Car menu, the hard-
wa re a n d s o ft wa re s t a t us fo r t h e “Au d i N a v i g a t i o n S ys t e m p l us ” w il l
be displayed.
Tips
If you press the button within the Car function, you can
program sound and tuning settings using the control buttons and
adjust the brightness for the display
page 169.
CARSETUP

SETUP169
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
SETUPIntroductionGeneral safety precautionsEnter vehicle settings only when the vehicle is stationary. The
procedures described below would distract your attention from
traffic if you performed them while driving. Please note
page 9,
“Notes on Traffic Safety”.
Selecting Setup functionFig. 180 Display: Setup Radio
– Press the button in addition to a button already
pressed. The main Setup menu
fig.180 which is part
of the main function (e.g. radio) is displayed.
– Press one of the control buttons in a Setup main menu

page 17 to go to the submenus for the Setup function
(in the example Radio to
fig.180).The Setup menu operates in conjunction with a function button
already pressed
page 16 a n d o p e n s a d d i t i o n a l m e n u i t e m s f o r t h e
main function Radio, CD, MP3 and Navigation. By pressing the
control buttons, the Setup submenus Settings, Sound and Display
can be opened
fig.180. These Setup submenus are always the
same, regardless of which Setup main function you are in.
SETUP
A1
A3

SETUP 170The following submenus are available in the Setup
function:
Tips
You can read about system-specific Setup settings functions in the
description for each primary function.
Settings control buttonSetting the menu language
Display texts can be shown in different languages.Fig. 181 Setup: Menu language setting–Press the Settings control button in the Setup menu.
– Select Menu language
fig.181.
– Select the desired menu language.The display texts for the Navigation System are changed to the
selected language. The language for the audible navigation
commands are also changed.
The following languages can be selected:
Control button
functions 
page 169,
fig. 180
Setup submenus

Settings
Menu language
Distance unit
Time/Date format
Factory settings
Delete user data

Sound
Balance
Fader
Tr e b l e
Bass
DSP
a)b)

Volume settings (Navigation info)
a)Digital Signal Processingb)Vehicles with a BOSE® sound system in conjunction with an AudioPilot do
n o t h av e a D SP f un ct i o n. I n th is c as e y o ur v e hi cl e is equ ip p ed w i th d y n am ic
noise compensation
page 94.
Display
Switch off display
Brightness
A1AA3