light AUDI A4 1995 B5 / 1.G 01A Transmission Assembly Workshop Manual
Page 26 of 27
34-66
- Install rear circlip (arrow) for ball bearing onto input shaft.
- Slide ball bearing onto input shaft.
Closed side of ball cage faces toward transmission housing.
- Press in ball bearing.
- Slide thrust piece -A- of press device onto input shaft.
- Position press device behind splines for clutch plate.
- Screw in bolts -B- and tighten slightly.
The bolts bear against the indentations in thrust piece -A-.
- Press in ball bearing onto seat by alternately tightening bolts -B- (1/2-
turn at a time) until stop is reached.
Pa
ge 26 of 27 Transmission, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.34.5