AUDI A4 1995 B5 / 1.G AFC Engine Cooling System Components Workshop Manual
Page 1 of 2
19-1
Cooling system components,
removing and installing Note:
Always replace gaskets and seals.
Draining and filling system with coolant page 19
-6 .
Testing cooling system for leaks page 19
-11
.
The toothed belt should NOT be removed in
order to take out the coolant thermostat.
The arrow markings on the coolant lines and the
ends of the coolant hoses must align with each
other.
Tightening torque for coolant pipe hose clamps:
3-3.5Nm (27-31 in lb).
1 -
Thermostat
2 -
Coolant pump
3 -
Radiator
Pa
ge 1 of 2 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.19.1
Page 2 of 2
19-2
4 -
Oil cooler
5 -
Expansion tank
6 -
Pressure cap
Testing page 19
-12
7 -
Coolant line
8 -
Feed line
To heater core
9 -
Heater core
10 -
Vent bore In the return line from heater core
Pa
ge 2 of 2 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.19.1